Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.0 Cr+₹6.4 L (6.84%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹1.2 Cr+₹24.1 L (25.7%)Rejected-AOC C 114 SECTOR 9 NOIDA GAUTAM BUDH NAGAR UP PIN 201301 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201301 | L3 | Rejected-AOC L3 | |
| 4 | L4₹1.2 Cr+₹30.2 L (32.2%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
27 Jul 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE IWC, SRE
OFFICE OF THE SE IWC, SRE
Work of Renovation of Pilakhani Inspection House and Reconstruction of Jiledari Office Under in Distt. SRE
2024_UPIDC_938942_1
03/SE/SRE/2024-25
Open Tender
Civil Works
Item Wise
270 days
SAHARANPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹2.7 L
23 Aug 2024
19 Jul 2024
27 Jul 2024
19 Jul 2024
27 Jul 2024
19 Jul 2024
Amount
Earth work in foundation in dry ordinary soil (loam clay or sand) including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in-charge up to a distance of 30M from the foundation trenches:(Building).
Centering and shuttering of R.C.C. work i/c lead & lift labour,T&P etc for Proper completion of work.
S/laying Steel reinforcement steel i/c cutting, bending ,binding T&P etc For Proper completion of work.
Laying C.C. in 1:3:6 in foundation i/c all cost of material, lift & lift labour,T&P etc For Proper completion of work.
Laying R.C.C in 1:1.5:3 ratio i/c cost of material, labour,T&P etc for Proper completion of work
Laying C.C. in 1:2:4 in foundation i/c all cost of material, lift & lift labour,T&P etc For Proper completion of work.
Ist class B/W in 1:4 C.M. i/c all cost of material,lead & lift labour,T&P etc for Proper completion of work. (Up to 3.0 m H.T)
Dismantling of existing plaster i/c raking out joints and disposal of debris , with in 60m lead and all cost of material, labour,T&P etc comp.
S/Laying 12.50mm Cement Plaster 1:4cm on Brick masonary I/c all cost of material, labour, T&P etc for Proper completion of work.
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per pecifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated GypsumTile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile acompletely sealed unit.
Supply & fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, i/c supply of all material, labour tools and plants etc. required for proper completion of the work. as per direction of Engineer in-Charge.
Supply and fixing 6 mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. etc for Proper completion of work.
Providing & Fixing per laminated P.V.C. rigid Sheet on wall for Meeting hall Inner Face Manufacturer by M/S Rajshri or equivalent wall panelling of Thickness 5mm stuck on inner aluminium frame work i/c necessary screws and fasterner as per Direction of Engineer in-Charage etc complete for Proper completion of work.
Supply & fixing of 4.5 C.M. thick teak wood part panelled & part glazed door & window, Shutter i/c supply & fixing of wooden cleats and stops & i/c fixing & adjustment of hinges, bolts, locks, handles spring and or other fitting but excluding their supply and i/c painting with two coats of black japan on all iron fitting if necessary. i/c fixing the glass panes with putty for bradglass and glass to be 4mm thick fitting with neccessary screws to be supplied by the deptt.
Supply/Fixing Teak wood wrought framed and fixed including simple mouldings ,straight work as in chaukhats including supply of all materials, labour,Tools & plants etc. required for proper completion of the work. I/c all cost of material, labour, T&P etc. for Proper completion of work.
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i/c all work Done as par direction of Engineer-in- charge including cost of all material, Labour T&P etc .
Earth work in embankment by power tranported earth with a lead beyond 200m. and upto 1.00 Km. including excavation, loading, unloading, manual compaction, dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. orders.
Providing and laying 100mm thick Precast cement concerete I-Shape interlocking paver block ISI mark confirming ot IS: 15658-2006 with Top layer of Minimum 5mm thickness having plan dimension 200x(160+120mm) of O.P. Cement, Smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-Compression mechanism. The Compressive strength of comcrete pver block shall not be less than 50Mpa and weight 5KG per i/c cost of material, with a blanket layer of 4.00cm. thick Fine sand. I/c labour, T&P etc required for proper for proper completion fo the work as directied by Engineer-in-charge
Distempering Ist coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials.
Providing wall putty on Old surface with Approvel Quality material of Berger/J.K./Birla or similar make-2 coat etc complete. For proper completion of work.
Polishing with French Polish or wax polish (in proportion 2 be es wax :1.5 linseedoil: 1 turpentine oil: 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc.required for proper completion of the work.
Supply & fixing of 30 watt Solar LED street light (All in One) with Solar module 50 watt along with 18AH(LI-PO4) 12.8 Volt Battery, 6M long GI Pole i/c Cost of material, installation, all accessories, T&P, Labour etc i/c all cost of material, labour, t&P etc comlete for proper completion of work.
Providing and Fixing wash basin Size 630x450 with C.I. brackets, 15mm C.P. brass piller taps, 32mm C.P. brass waste of standard pattern, i/c painting of fitting and brackets, cutting and making good the walls wherever require.
Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings.
Providing and fixing 15mm Dia chlorinated plyvinyl chloride (CPVC) pipes, having thermal stability fo hot & cold water supply, i/c all CPVC plain & Brass threaded fitting, i/c fixing the pipe with clamps at 1.00M spacing. This i/c Jointing of pipe & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same i/c testing of Joints complete as per Direction of Engineer in-Charges. Concealed work, i/c Cutting chases and making good the wall etc.
Providing and fixing 15mm Nominal Bore Brass Bib cock ISI marked approved quality Confirming to IS:8931 As per Direction of Engineer in-Charge.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS1 3983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: (510x1040 mm bowl depth 250 mm)
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6litre (adjustable to 4 litre/8 litre), including seat cover and cistern fittings, nuts, bolt sand gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, Hot finished welded type tubes etc. complete. I/c all cost of material, labour, T&P etc for Proper completion of work.
S/Fixing of Iron Sheet Galvanlized Corrugated 24 gauge (0.90mm) for Shade of car parking I/c all cost of material, labour, T&P etc for Proper completion of work.
Wiring points for light with 1 sqmm. FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
Wiring points for fan and light duty exhaust fan with 1.5 sqmm. FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable and 5Amp flush type switch and 3 pin socket for plug point.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required. RJ 45 data socket outlet with shutter.
Supply and wiring of submain one number 2.5 sqmm FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
Supply and wiring of submain one number 4 sqmm FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4.0 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all . 4 X 10 sqmm
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect. CAT-AAA 1x22 Watt.
Supply and fixing of LED street light fitting havingdie cost aluminium body and diffuser with driver set suitable 75 to 90 Watt Confirming to IP 66 and above protection complete in all respects. On wall. CAT-AAA
Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
Suuply and fixing of water tight oblong 10 watt LED bulkhead luminaire with driverr set confirming to IP 65 and above Protection complete in all respect.(CAT: AAA)
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary ,conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work., 600x480x200 mm. size
Supply and fixing of flush/surface mounting distribution boards complete in all respects. CAT-A ,4 Way TPN
Supply and fixing of flush/surface mounting distribution boards complete in all respects. CAT-A ,6 Way TPN
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps. CAT-B
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of Engineer-in-charge. 40 Amp. 4 Pole MCB CAT-B
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. CAT-B
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. , pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sqmm 3.5 core
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware / Hindware / Seabird / Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/Hindware/Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length15 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931a) 15 mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931a) 15 mm nominal bore
Providing & fixing soil, waste and vent pipes.(a) 100mm dia centrifugally cast iron S & S pipe.
Providing & fixing soil, waste and vent pipes. (b) 75mm dia centrifugally cast iron S & S pipe.
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters .(a) 100mm
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters .(b) 75 mm
Providing & fixing cast iron trap of self cleaning design with or without ventarm complete, including cost of cutting & making good the walls & floors.(a) 100mm inlet & 75mm outlet.
Providing & fixing cast iron coller.a) 100mm dia.
Providing & fixing cast iron coller.b) 75mm dia.
Providing and fixing plain cast iron S & S sanitary bend.a) 100mm
Providing and fixing plain cast iron S & S sanitary bend.b) 75mm
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.a) 100mm
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.b) 75mm
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)100 mm dia
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).15mm dia nominal bore
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).20mm dia nominal bore
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).32mm dia nominal bore
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.15mm dia nominal bore
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.20mm dia nominal bore
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.25mm dia nominal bore
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.32mm dia nominal bore
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).15mm dia nominal bore
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).15mm dia nominal bore
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).25mm dia nominal bore
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).32mm dia nominal bore
Providing and fixing gun metal gate valve with wheel of approved quality .(b) 32mm dia nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. Capcity in Litres
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.All kinds of soi lPipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.100mm diameter
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.150mm diameter
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design100mm dia SW pipe
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design150 mm dia SW pipe
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).With FPS bricks of class designation 75
Making of Septic Tank (Size :- Length = 5.0 M. Width = 2.00M Total Depth=3.00M) & Makingof soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40 mm nominal size)
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size).
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
12mm cement plaster on rough side of mix 1:4 (1 cement : 4 coarse sand)
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
Providing & fixing 75mm dia vent pipes.
Providing & fixing of 75mm dia cast iron terminal guard.
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. (1)M.D. -10- Circular shape 500mm internal diameter
(2)M.D. -2.5- Circular shape 450mm internal diameter
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
Construction of Rain water harvesting system for Pilkhani Inspection House i/c cost of material , labour t&p etc complete.
Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand of 2.25 F.M.)
M-20 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, intels, bands plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20mm nominal size)
FE-500 or above Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tnsile steel bars.
12mm cement plaster on rough side of single or half brick wall mix 1:4 (1 cement : 4 coarse sand)
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:With 20x20mm square bar
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.M.D. -10- Circular shape 500mm internal diamete
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level.Drilling of 300mm dia bore hole manually.
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m(.a) Pipes 80mm to 300mm diameter.
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.(a) 150mm diameter S.W. Pipe
(b)200mm diameter S.W. Pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipesincluding bed concrete as per standard design :(a) 150mm diameter S.W. Pipe
(b)200mm diameter S.W. Pipe
Constructing brick masonry manhole with 150 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
Construction of Boring with 1.5 H.P. Submersible Pump Set. i/c cost of Material,labour t&p etc complete.
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia
Supply of submersible pump of suitable make for approx. 60lit/min discharge at 50 meter head with control panel, support wire etc complete.
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface 6 sqmm 2 core
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore
SANJEEV SINGH PUNDIR
Rakendra kumar mishra
vijendra kumar
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .