SPECIAL REPAIRS TO ORs MD ACCN OF P-14 AND P-15 AT OLD DOMLUR UNDER GE (CENTRAL) BANGALORE

Amount

Taking down Cement Plaster of any description on Brick Walls, Stone Walls Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land complete all as directed.

M&L Rendering 5mm thick on fair faces of concrete surface of ceiling/Chajjahs in CM 1:3, surface finished even and surface without using extra cement complete all as directed.

Rendering 15 mm thick on brick masonry or concrete surface of internal surface of walls in CM 1:6, surface finished even and surface without using extra cement complete all as directed.

M&L Rendering 15 mm thick on brick masonry or concrete surface of external surface of walls in CM 1:4, surface finished even and surface without using extra cement complete all as directed.

M & L rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as directed.

Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness all as specified and directed. M/L for applying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete removal of debris outside MD land complete all as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level including terrazzo finish wherever existing complete all as directed.

Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as directed.

M&L Cement concrete 1:2:4, type B0 (12.50mm graded stone aggregate) for floor as in sub base for floor tiles complete all as directed.

M&L Coloured Non-Skid Ceramic joint free of matt finish tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 15mm thick screed bed in CM (1:4) complete all as directed.

M&L Coloured Non-Skid Ceramic joint free of matt finish tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in wall/skirting etc,set and jointed in neat cement sluryy and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4 complete all as directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:4 complete all as directed.

M&L Glazed ceramic coloured tiles (300x200mm)x7mm thick on vertical surfaces such as skirting, dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4 complete all as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as directed.

M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 15 mm thick screed bed in CM 1:4 and Rounding to edges complete all as directed.

M&L for 18-20mm thick Sadherhali stone slab for skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 10 mm thick rendering in CM 1:3 all as complete all as directed.

M&L 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 15 mm thick screed bed in CM 1:6 and Rounding to edges complete all as directed.

M&L for Treating anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as directed.

M&L for hardcore with broken stone aggregate of gauge n.exc 63mm deposited spread and levelled in layer not exc 15cm thick , watered and rammed to true surface complete all as directed.

M&L PCC 1:3:6 type C2 75 mm thick (using 40mm graded aggregate) as in Plinth protection finshed the concrete surface even and smooth W/O using extra cement complete all as directed.

Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar complete all as directed.

M&L for Precast cement concrete block masonry with solid blocks, type C1 1:3:6 (using 20mm graded crushe/d hard granite stone aggregate) exc 10cm width & setting in C.M 1:6 complete all as directed.

M&L for Precast cement concrete type C1 1:3:6 (20mm graded aggregate) solid building blocks 10cm thick setting in CM 1:6 complete all as directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each complete all as directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n. exc 4 Sqm each complete all as directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as directed.

Taking down shutters exc 1 sqm but not exceeding 2.0 Sqm easying, adjusting and refixing in same opening complete all as directed.

M & L for pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete, as specified,supplied and fixed complete all as directed.

M & L for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete, as specified,supplied and fixed complete all as directed.

PCC 1:2:4 type Bo using 12.50mm graded aggregate as in filling of chowkats etc complete all as directed.

S&F in repairs Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats complete all as directed.

S&F 30 mm flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as directed.

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

S&F Steel windows with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or wilded complete all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed.

M&L Pre-laminated particle board, Exterior grade 18/19mm thick, pre-laminated both side with decorative choice lamination and 3mm thick teak wood edging of all around all as specified and directed by Engr-in-charge.

Supply only 4mm thick Plain Sheet glass complete all as directed.

Supply only stailess steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples with wodden beading on wooden shutter or with screws to steel / aluminium shutter complete all as directed.

S&F stailess steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples with wodden beading on wooden shutter or with screws to steel / aluminium shutter complete all as directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as directed.

S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for foor frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as directed.

S&F in repairstainless steel self closing auto hinges for cabinet complete all as directed.

S&F Butt hinges 75mm stainless steel , medium weight complete all as directed.

S&F Butt hinges 100mm stainless steel , medium weight complete all as directed.

S&F 100mm long Aluminium, anodized barrel tower bolts of extruded section complete all as directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section complete all as directed.

S&F 100mm long aluminium anodized handles of extruded section complete all as directed.

S&F 150mm long aluminium handles, cast type anodized complete all as directed.

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw 100mm size complete all as directed.

S&F 15mm dia Magic Eye complete all as directed.

S&F in Repair 20mm dia Stainless steel Curtain Rod of approved quality all as specified complete all as directed.

S&F in repair Stainless steel curtain rod brackets complete all as directed.

Mortice lock cupboard grade I 65mm, brass, 2 lever complete all as directed.

Rotational moulded polyethene water storage tanks1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank including dismantling of existing water tankincluding dismantling of existing water tank including 25mm Ball Valves, 25mm Union, 25mm gate valves, complete all as directed by Engr-in- Charge.

Disconnecting existing tanks, exc 500ltrs but not exc 1000ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as directed.

Taking up or down steel tubing and connections 20/25mm bore complete all as directed.

S&F 20m outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as directed.

S&F 25m outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as directed.

S&F in repairs Stain Less Steel ( conforming to AISI -304 grade) Kitchen Sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement morter and fixed on CP cantilever brackets, complete as directed. (Make -Nirali, Elegance(regular) Range or equivalent of sink complete all as directed.

S&F in Repair Bib Tap Sink Cock with flange 15 mm bore all as directedby the Engineer -in -charge. (Make:- Prayag Cat no 8316 or equivalent)

S&F in repairs Stainless steel plate rack of size 900mm x 900mm x 250mm including fixed with rawl plug and screws on walls complete all as directed. (Make -Nirali/Blue star / Parry ware/ Prayag or equivalent.

S&F in Repair Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) and bedded in cement morter and fixed on CP cantilever brackets all as specified & directed by Engineer-in-charge.

S&F 40mm bore Galvanised steel spout, medium grade complete all as directed.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic seat cover closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 600mm long etc complete all as directed.

S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as directed. Make : Prayag Cat No - 8475 or Equivalent

S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as directed. Make:Prayag 8306 or equivalent

S&F in repairs 2 in 1 CP 15mm Bib taps Quarter turn fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as directed. Make : Cera CL 2016 or equivalent

S&F in repairs Stop valve/Angle stop valve, 15 mm bore, cast copper alloy chromium plated fancy type with long shank and cup concealed type complete all as directed. Make Cera F8040204 or its equivalent

S&F in Repair 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as directed.

S&F in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair complete all as directed.

S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 100mm size including fixing to steel pipe or union complete all as directed. Make: Cera Cat No-F7020304 or Equivalent

S&F as in repair Health Faucet 1 Meter Long Flexible Tube & Hook complete all as directed. (Make:- PRAYAG Cat No BEA-40 OR EQUIVALENT)

S&F in repairs CP Soap dish 150mm, fixed to wall with chromium plated brass screws complete all as directed.

S&F in repairs toilet paper holder chromium plated, Make: Prayag, Cat No-BA-58 complete all as directed.

M&L Preparing of New surfaces of wall and applying two coats of distemper oil bound over a coat of Birla Wall care putty 1mm thick wall putty over a coat of priming coat complete all as directed.

M&L Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as directed.

M&L Preparation of Newly plastered surface and applying three coats of white wash on Walls complete all as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified.

Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface ,applying a coat of 1mm thick Birla wallcare putty for smooth finished of the surface and applying two coat of oil bound distemper complete all as directed.

M&L Preparation of Old decorated surface and applying two coat of white wash on Walls etc complete all as directed.

M&L Preparation of Old decorated surface and applying two coat of white wash on ceiling etc complete all as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over on old surfaces complete removal of existing surface complete all as specified.

M&L Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

M&L Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as directed.

M&L for preparation of new steel surface over 10cm with or girth. applying two coats of synthetic enemal paint over a coat of red oxide primer including complete all as directed.

M&L in repairs PVC (SWR) floor trap 75mm dia plain with steel grating including jointing with solvent cement etc complete, fixed in repair complete all as directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as directed.

S&F PVC (SWR) bends 110mm dia any radius with access door complete all as directed.

S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as directed.

S&F PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door complete all as directed.

S&F PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as directed.

S&F PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as directed.

S&F PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as directed.

S&F PVC (SWR)vent cowl 110mm bore complete all as directed.

S&F in Repair Chromium Plated Steel Grating of 100mm size With or Without Waste Hole complete all as directed.

Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris outside MD land complete all as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm grades stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement complete all as directed.

M&L Rendering 10mm thick on brick work or concrete surface in CM 1:4 surface finished even and surface without using extra cement including WPC (WPC measured and paid seprately) complete all as directed.

M&L for Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.0 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrate, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as directed including taking down existing treatment complete all as directed. (WPC measured and paid seprately)

Supply only integral water proofing compound complete all as directed.

Demolition of cement concrete ( reinforced) other than ground floors, beams stair cases, landings, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as directed.

Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed.

Form work rough finished surface of edges of concrete flats, treads, RCC/PCC bands in walls, chajjas, horizontal or sloping ans similar wk exc 10cm but n exc 20cm wide complete all as directed.

S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.

Ditto item No 35 above but 6 to 8 mm dia complete all as directed.

M&L Reinforced cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls,chajjas, beams, landings, deck slab and like complete all as directed.

Providing pre cast reinforced concrete type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) for man holes cover slab, set in CM 1:4 including necessary form work complete all as directed. Note:- Reinforcement steel shall be measured and paid separatly)

TMT bars 6 to 8 mm dia and over for roof slab, cut to length, bent to shape required, including cranking, bending etc and securing with including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

S & F 5 feet long pulley operated clothes drying system kit of 4 pipes consisting of aluminium pipes each of outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit. Rope will HDPE double core of 4mm dia complete all as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as directed.

Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit 25 mm size (Medium Grade) on conceeled type wiring conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for following :-

(a) One light or fan/bell point controlled by one 5 Amps switch one way complete all as directed.

(b) One 3 pin socket point 5 Amp on independent board complete all as directed.

(c) One 3 pin socket point 5 Amp on same board with other switches complete all as directed.

Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit (Medium Grade) on surface conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light point controlled by 2 way switches 5 Amps complete all as directed.

All as per item No. 119 above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as directed.

M&L, Switch piano, flush button single pole, 5 Amps one way complete all as directed.

M&L, Switch piano, flush button single pole, 6 Amps two way complete all as directed.

M&L, BELL Push, flush button single pole, 5 Amps one way complete all as directed.

M&L, BELL DING DONG 230 V AC single pole, 5 Amps complete all as directed.

S&F Switch socket combination flush type 5 Amp 2 in 1 complete all as directed.

S&F Switch socket combination flush type 5/16 Amps5 in 1 complete all as directed.

Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as directed.

Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as directed.

S&F replacement LED tube light fitting Mirror type ,2 Feet of 10 watts , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with wall mounting all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with wall mounting all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm and old LED/FTL tube light fittings Deposit to store with all as specified and directed by Engr-in-charge.

S&F bldg security light light fittings 1x 35 Watt Ac 230v out door type LED street light with high pressure die cast aluminium and heat ressistent complete with driver ,lamp bracket with impact and corrosion resistent including thermal managment in multiple optics complete , IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface including taking down unserviceable one complete all as directed.

M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4. sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SP 8 way horizontal type, Double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S & F in replacement MCB single pole 6-32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete e with all as specified and directed by Engr-in-charge. Make Indoasian

S & Fin replacement MCB single pole & neutral 40 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified. Make Indoasian

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 415 volts, TPN 04 way Vertical type, double door, Tripal pole and neutral with 200 Amps rated copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S & F in replacement MCB four pole 100 Amps 415 volts, 25 kA rupturing capacity providing in DB complete all as directed. Make Indoasian

S & F Exhaust fans steel body Ac single phase 230 v of size 300mm sweep with blades, frame and louvers with Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire as complete all as directed,NOTE: Quoted rate deemed to be included for Core cutting machine hole by opening in any type of walls (Stone/Bricks) in the building including neccessary plastering, grouting of nuts & bolts and washers suitable size and neccessary fixing arrangement for fixing louvre and including making good to disturbed surface area to its original position complete all as directed. Make: Crompton / Khaitan/ Usha / Bajaj /Almonard

S & F Exhaust fans PVC body Ac single phase 230 v of size 300mm sweep with blades, frame and louvers with Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire as complete all as directed,NOTE: Quoted rate deemed to be included for Core cutting machine hole by opening in any type of walls (Stone/Bricks) in the building including neccessary plastering, grouting of nuts & bolts and washers suitable size and neccessary fixing arrangement for fixing louvre and including making good to disturbed surface area to its original position complete all as directed. Make: Crompton / Khaitan/ Usha / Bajaj /Almonard

Taking down ceiling fan dismantling and painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as directed

Rewinding of ceiling fan with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete and testing complete all as directed.

M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6. mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth 4mm earth wire as earthing lead of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion including dismantling of old earthing materials complete all as directed.

B5BUILDING SOLUTIONS

Srisrinivasaenterprises

PRACHANIVA CONSTRUCTIONS

PRAGATHI BUILDERS

S.R.V.Builders

Moulya Builders

D NAGI REDDY