Outside Colouring with Necessary Repairing Works and Installation of Solar Light Arrangement at Compound Premises of WRI and DD Administrative Building at Saratpally at Mouza-Narampur, Block-Medinipur Sadar in the District of Paschim Medinipur

Outside Colouring

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

Neat cement punning about 1.50mm thick in wall, dado, floor, drain, door and window sill etc. Complete

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor):

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be apploied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor (Two coat). c) Super Protective 100 % Acrylic Emulsion.

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor. Flash butt welded windows and ventilators. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989.

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil throughmasonry concrete structures etc. if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mmM.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including lockingarrangements, fittedandfixed inposition with lugs set incement concreteand including cuttingnecessary holes, chasingetc. inwalls, floorsetc. andmaking good damages complete.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make. (b) On steel or other metal surface : With super gloss (hi-gloss) (iv) Two coats (with any shade except white) and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

Clearing compound premises of shurbs, plants, jungles etc. By cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary) (Payment to be made on area cleared

Lighting System at Scheme: (With lighting Pole): Dawn to dusk loighting arrangement of 4mts. Height above ground level with (Hot Dip) Galvanized 80mm x 40mm G.I. pipe with Solar Battery 12V, 15 Ah 2 in 1 Lithium-ion/ Ferrophosphate battery with in-built 7-11 watt LEP lamp (reputed brand- tubular type), Charge controller, 50 Wp solar panel to cover the scheme area. The height should be warranted 5 years from the date of installation.

Add GST for work value @ 18% or as applicable as per Govt. rule.

Add Labour well fare Cess @1% of Gross Bill Value

Please Enable Macros to View BoQ information