Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹33.3 L+₹4.3 L (14.7%)Rejected-AOC 474 27 NORTH CIVIL LINE 5 SAKET COLONY MUZAFFARNAGAR UP 251 001 | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹34.5 L+₹5.5 L (19.0%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹37.4 L+₹8.4 L (29.1%)Rejected-AOC B 2 PREET VIHAR NAUCHNDI GROUND MEERUT UP 250001 | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L4 | Rejected-AOC Rejected due to not being L1 | |
| 5 | L5₹40.7 L+₹11.7 L (40.3%)Rejected-AOC NOT SPECIFIED | L5 | Rejected-AOC Rejected due to not being L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 May 2023, 6:00 pmClosed
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut-250001(UP)
REPAIR AND POLISHING TO VARIOUS WOODEN FURNITURE UNDER BSO (SOUTH) OF GE (SOUTH) MEERUT CANTT
2023_MES_586982_1
GE/MRT/S/8038/2023-2024
Open Tender
Civil Works
Item Rate
330 days
Meerut Cantt
Please prefer tender documents
10 documents required · 10 mandatory
₹500
GE (South) Meerut
₹90,000
Yes
19 Aug 2023
25 Mar 2023
8 May 2023
25 Mar 2023
6 May 2023
15 Apr 2023
26 Mar 2023 - 8 Apr 2023
Amount
Chair Easy (Drg No FD-229). Supply and fix leg made out of well seasoned 1st Class teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per drg after removing the unserviceable without damaging the other parts complete all as specified and directed.(Front Leg of chair easy)
All as per item No 1.00 above but rear leg .
All as per item No 1.00 above but front rail .
All as per item No 1.00 above but back rail .
All as per item No 1.00 above but side rail .
All as per item No 1.00 above but arm rest .
All as per item no. 1.00 above but batten rail under seal frame.
Material and labour for recanning for seat and back: recanning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true "godrej pattern" all as shown on drawings. Holes for recanning shall be 12.5 mm centre to centre and complete all as specified and directed.
Polishing : Material and labour for Scrapping of old polish and dirt from the surfaces of wooden furniture by means of electric grinder using appropriate sand paper, preparation of surfaces and applying French polish in required coats to the entire satisfaction of Engr-in-charge as described to give glossy and smooth finish (chair easy) etc complete all as specified and directed. (Make : Asian / Shalimar/Berger)
Chair Dining (Drg No FD-279/228). All as per item no. 1.00 above but front leg of Chair Dining.
All as per item No 10.00 above but rear leg.
All as per item No 10.00 above but front rail .
All as per item No 10.00 above but back rail.
All as per item No 10.00 above but side rail.
All as per item No 10.00 above but back rest.
Canning for seat : All same as per item No. 8.00 above but seat of Chair Dining.
All as per item No 10.00 above but stiffener .
Polishing : All same as per item No 9.00 above but for chair dining.
Chair Writing (Drg No FD-20/280). All as per item no. 1.00 above but front leg of Chair Writing.
All as per item No 19.00 above but rear leg.
All as per item No 19.00 above but front rail.
All as per item No 19.00 above but side rail.
All as per item No 19.00 above but back rail.
All as per item No 19.00 above but back rest.
All as per item No 19.00 above but stiffener .
All as per item No 19.00 above but arm rest .
Canning for seat : All same as per item No. 8.00 above but seat of Chair writing.
Polishing : All same as per item No 9.00 above but for Chair writing.
Table 3'x2' with/without Drawer (Drg No FD-41/42/231/224/283 & 284) Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded complete all as specified and directed. (Make :- Greenlam / Greenpanel / Centuryply / Greenply / Kitply / Archidply / Action Tesa)
All as per item no. 1.00 above but for leg of Table 3 x 2 with / without Drawer.
All as per item No 30.00 above but long rail .
All as per item No 30.00 above but short rail .
All as per item No 30.00 above but long stiffener .
All as per item No 30.00 above but short stiffener .
Drawer : Drawer shall be made out of front and side faced from pre-laminated MDF board 18-19 mm thick complete with knob confirming to IS in baverian beach shade as per drg and provided with recessed handle of best quality as approved by E-in-Charge . Bottom of drawer shall be made of plywood 6mm thick complete all as specified and directed. (Make :- Archidply / Greenply/ Greenpanel / Greenlam/ Centuryply/ Kitply /Action Tesa)
All same as per item No. 30.00 above but wooden cleat.
Polishing : All same as per item No 9.00 above but for table 3'x2' with drawer except top.
Polishing : All same as per item No 9.00 above but for table 3'x2' without drawer except top.
Table 3'x3' (900x900x760mm) Drg No FD-88 & 291. Top: All same as per ser item No. 29.00 above but for table 3'x3'.
All as per item no. 1.00 above but Leg of Table 3 x 3.
All as per item No 40.00 above but top rail.
All same as per item No. 40.00 above but wooden cleat.
Polishing : All same as per item No 9.00 above but for table 3'x3'.
Table Writing( Drg No FD-33,249 & 275). Top : All same as per ser item No. 29.00 above but top of table writing
All as per item no. 1.00 above but Leg of Table Writing.
All as per item No 45.00 above but short rail .
All as per item No 45.00 above but stiffener .
All as per item No 45.00 above but bottom rail of table writing.
Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable fancy knob 40mm dia as approved with lock and suitable catcher complete all as specified and directed.
Supply and fixing of sides and bottom of cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in baverian beach shade as per drg complete all as specified and directed.
Supply and fixing of back of cup board : It shall be made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg complete all as specified and directed.
Supply and fixing of partition of the cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge.
All as per item No 35.000 but Drawer of table writing complete all as specified and directed.
Polishing : All same as per item No 9.00 above but for table writing except top and laminated surfaces.
Table Dressing Ladies with mirror (Drg No FD-32(M)/251 /378). Supply and fixing of mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots . Mirror shall be of electro copper plated polished sheet glass 6 mm thick complete all as specified and directed. Make- Saint Gobain / Modiguard / Swastic
Drawer with knob : All same as per item No 35.00 above but suitable for Table dressing ladies with mirror as per the drg.
Top : Top shall be made of both side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in Baverian beach shade in one piece after removing the old one without damaging the other parts complete all as specified and directed.(Make-Greenply/ Archidply/ Centuryply / Greenlam / Greenpanel / Action Tesa)
Side : All same as per item No 57.00 above but suitable for Side Table dressing ladies with mirror as per the drg complete all as specified and directed.
Bottom : All same as per item No 57.00 above but bottom of table dressing ladies complete all as specified and directed.
Supply and fixing of Back shall be of plywood commercial 12mm thick BWR grade confirming to IS complete all as specified and directed.
Sliding glass shutter : It shall be made of 5mm thick plain glass alongwith 2 nos runner of best quality shall be fixed in bottom side of each glass for smooth function. Standard aluminum channel having two U shaped for sliding of plain glass also shall be fixed alround wherever required as per drg and as directed by Engr-in-charge .
Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg to be fixed with suitable no of screw wood steel complete all as specified and directed.
Short Stiffener : All same as per item no. 62.00 above but short stiffener of table dressing ladies complete all as specified and directed.
Leg : All same as per item no. 62.00 above but leg of table dressing ladies complete all as specified and directed.
Polishing : All same as per item No 9.00 above but for table dressing ladies with mirror.
Table Centre (Drg No FD-274). Top : All same as per item No. 29.00 above but top of Table Centre complete all as specified and directed.
All as per item no. 1.00 above but Leg of Table Centre.
Long rail : All same as per item No 67.00 above but long rail for table centre.
Short rail : All same as per item No 67.00 above but short rail for table centre.
Stiffener: All as per item no. 67.00 above but long stiffener for table centre.
Short Stiffener : All same as per item no. 67.00 above but short stiffener of Table centre.
Polishing : All same as per item No 9.00 above but for table centre.
Teapoy (Drg No FD-232/382/34M). Top : All same as per item No 29.00 above but for teapoy.
All as per item no. 1.00 above but Leg of Teapoy.
All same as per item No 74.00 above but long rail for teapoy.
All same as per item No 74.00 above but short rail for teapoy.
All same as per item No 74.00 above but stiffener for teapoy.
Polishing : All same as per item No 9.00 above but for teapoy.
Bed Plywood top (Drg No FD-21M/246). Supply and fixing of plywood : Top of the bed to be made of plywood commercial 12mm thick 7 ply BWR grade conforming to IS 303-1989 in one piece after taking out the old one and to be fixed with 35mm long screw wood steel ISI marked all as specified in drg or as directed by Engr-in-charge .(Make Centuryply / Greenply / Archidply / Kitply)
All as per tem no. 1.00 above but Legs suitable for Bed Plywood Top.
All as per item No 80.00 above but Long Rail.
All as per item No 80.00 above but Short Rail.
All as per item No 80.00 but stiffener ( center support) .
Supply and fix of head rest : Outer and inner side ply to be replaced by 4mm thick ply wood one side teak face confirming to IS: 303-1989 including teak wood beading all round and 1/2 cut 12 mm dia beading made to shape as shown on drg or directed by Engr-in-charge .(Make-Archidply / Greenply / Kitply / Centuryply)
All same as per item No 84.00 above but foot rest for bed ply wood top complete all as specified and directed.
Supply and fix of head rest : Supply and fix Head rest complete as per drg alongwith legs to the bed wherever required Specification for ply wood 4 mm thick one side face shall be provided complete all as specified and directed.
All same as per item No 86.00 above but foot rest for bed ply wood top complete all as specified and directed.
MS Clamp : Supply and fix MS Flat iron clamp size 150x30x5mm made to shape as per drg to be fixed with 6 Nos of screw wood steel 35 mm long ISI marked duly painted with paint synthetic enamel black to the entire satisfaction of Engr-in-charge over a coat of primer complete all as specified and directed.
Polishing : All same as per item No 9.00 above but for bed plywood top complete all as specified and directed.
Peg Table (Drg No FD-25M/277). Top : All same as per item No 29.00 above but for Peg table complete all as specified and directed.
All as per tem no. 1.00 above but Legs of Peg Table.
All same as per item No 91.00 above but long rail for Peg table.
All same as per item No 91.00 above but short rail for Peg table.
All same as per item No 91.00 above but stiffener for Peg Table.
Polishing : All same as per item No 9.00 above but for Peg table.
Book case Drg No FD - 45/237(M). Top : Top shall be made of both side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in Baverian beach shade in one piece. Edging alround with 4 mm thick teak wood beading shall be provided complete all as specified and directed.
All same as per item No 96.00 done but bottom for book Case.
All same as per item No 96.00 done but sides for book case.
Shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18-19 mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher complete all as specified and directed.(Make : Greenply / Greenlam / Greenpanel/ Archidply / Centuryply /Action Tesa / Kitply)
Back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece complete all as specified and directed.
Long stiffener : S&F Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.
All same as per item No 101.00 above but short stiffener
All same as per item No 101.00 above but leg.
Polishing : All same as per item No 9.00 above but for Book Case.
Table Dining 6 / 8 pers (Drg No FD-30, 273 , 376 & FD/MAP-II/03). Top for table dining 6 pers : All same as per ser item No 29.00 above but suitable for table dining 6 pers complete all as specified and directed.
Top for table dining 8 pers : All same as per ser item No 29.00 above but suitable for table dining 8 pers complete all as specified and directed.
Long rail of table dining 8 pers: All as per item no. 1.00 above but suitable for table dining 8 pers complete all as specified and directed.
Long rail of table dining 6 pers : All same as per ser item No. 107.00 above but suitable for table dining 6 pers.
Short rail of table dining 6 pers : All same as per ser item No. 107.00 above but short rail.
Leg : All same as per item No. 107.00 above but leg.
All same as per item No. 107.00 above but wooden cleat.
Polishing : All same as per item No 9.00 above but for table dining 6 pers.
Polishing : All same as per item No 9.00 above but for table dining 8 pers.
Side Board (Drg No FD-241/371). Removing of unserviceable top, making to size fixing new top of required size made of 18-19mm thick prelaminated MDF board in colour/shade as approved by GE. 2 mm thick PVC edging shall be fixed on sides with string bonded complete all as specified and directed.
All as specified in item No 114.00 above but for bottom of side board
All same as per item No 114.00 done but sides for side board.
Supply and fix of door shutters: All same as per item No 49.00 above but suitable for side board as per the drg complete all as specified and directed.
Supply and fix of drawer : All same as per item No 35.00 above but suitable for side board as per the drg complete all as specified and directed.
Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece complete all as specified and directed.
Supply and fix leg made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished and to be fixed with suitable groving with long/short frame complete all as specified and directed.
All same as per item No 120.00 above but long stiffener .
All same as per item No 120.00 above but Short stiffener .
Polishing : All same as per item No 9.00 above but for Side Board.
Chair Dining Offr (Drg No FD/MAP-II/04). All as per item no. 1.00 above but front leg for Chair Dining Offr.
All same as per item No 124.00 above but rear leg .
All same as per item No 124.00 above but front rail .
All same as per item No 124.00 above but back rail .
All same as per item No 124.00 above but side rail .
All same as per item No 124.00 above but back rest .
Supply and fix of seat : Supply and fix ply wood commercial 8mm thick with cushion 75mm 40 density Make: Sleepwell including tapestry cloth not less than Rs 250/RM complete all as specified and directed.
All same as per item item No 124.00 above but stiffener .
Polishing : All same as per item No 9.00 above but for chair dining Offr.
Hat Stand with mirror (Drg No FD- 361 & 362). Supply and fix of looking Mirror size 440x300x6mm of approved quality duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg complete all as specified and directed.(Make-Modi guard/Saint Gobain/Swastic)
Supply and fixing of peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .
Supply and fix of rawl plug : Rawl plug as per drg and approved sample shall be fixed to the back of the hat stand as shown on the drg .
Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg complete all as specified and directed.
Supply and fix of plywood : Plywood 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge .(Make- Greenply / Centuryply / Kitply / Archidply )
Polishing : All same as per item No 9.00 above but for suitable for Hat stand with mirror (Except mirror).
Dressing Mirror Gents (FD/E6/MAP/16) Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick . Suitable rawl plug heavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. (Make- Saint Gobain/Modiguard)
Supply and fixing of unsv Sides of Dressing Mirror Gents with both sides melamine faced pre laminated MDF Board 18-19 mm thick confirming to IS in baverian beach shade complete all as specified and directed by Engineer-in-Charge.
Removing and replacement of unsv glass Shelf of Dressing Mirror Gents
Removing and fixing of unsv hasp & staples of dressing mirror gents .
Removing and fixing of unsv wooden leg of dressing mirror gents.
Supply and fixing of unsv 12th mm BWR Phenol bonded ply back of dressing gents mirror complete all as specified and directed by Engineer-in-Charge.
Polishing : All as per item no. 9.00 above but for Dressing Mirror Gents.
Table Dressing Ladies including stool dressing (FD/MAP-II/07 Sheet 1/2 & 2/2). Supply and fix of mirror : All same as per item No 139.00 above but suitable for Table dressing ladies with mirror as per the drg.
Supply & Fixing of unsv sides of table dressing ladies after removing damaged parts.
Supply & Fixing of unsv Top of table dressing ladies after removing damaged parts.
Drawer with Fancy Handle : Removing & fixing of unsv drawer and Fancy Handle of Table Dressing Ladies with Mirror.
Replacement of Unsv cushion with 75 mm foam 40 density cushion covered with tapestry cloth of supreme quality complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of unsv drawer channel of table dressing ladies.
Polishing :- All as per item No. 9.00 above but for table dressing Ladies.
Table Dining 4'x 3' for JCOs/ORs (Drg No FD/MAP-II/03). Top : All as per item no. 29.00 above but for Top for Table Dining 4' x 3' .
All as per item No. 1.00 above but leg of Table 4 x 3 for JCOs / Ors
All as per item No 154.00 above but long rail .
All as per item No 154.00 above but short rail .
Polishing : All same as per item No 9.00 above but for table dining 4'x3' for JCOs/ORs except top.
Table Bed Side (FD/E6/MAP/15 (R) Supply & fixing of unsv drawers channels as per Drg of Table Bedside MAP for smooth movement complete all as specified and directed by Engineer-in-Charge.
Supply & fixing of unsv Handles of Table Bedside MAP.
Supply & fixing of unsv top of table bed side MAP with 18-19 mm prelaminated MDF Board as per drg complete all as specified and directed.
Supply and fixing of unsv shoe of table bed side (MAP)
Polishing : All as per item no. 9.00 above but suitable for Table Bed side MAP
TV Trolley (FD/E6/MAP/04(R) Supply & Fixing of New Glass Shutter (5 mm) with Steel Hinges & Magnetic Catcher as per drg.
Supply & Fixing of New Top of 18-19 mm prelaminated MDF Board all as specified and directed. (Make - Archidply / Greenply/ Centuryply)
All as per item no. 164.00 above but sides of TV Trolley.
Supply & Fixing of new Caster (Wheel).
Supply & Fixing of Drawer Channel Suitable for TV Trolley MAP.
Sofa Set 05/04 Seater (FD-281/373) : Supply and fixing of leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.
Supply of foam cushion for sofa set size 560x530x100mm 40 density in pink/blue colour duly covered all over with tapestry cloth superior quailty not less than Rs 350.00 per running mtr after covering with cora cloth as Approved by GE. A suitable ZIP with matching colour to one side of cushion shall be provided as directed. Make-Sleepwell
Polishing : All as per item no. 9.00 above but for sofa set 05 seater in 03 pieces
Polishing : All as per item no. 9.00 above but for sofa set 04 seater
Chair Dining JCO/OR (FD/MAP-II/05):Removing of unserviceable PVC Sheet from Chair Dining and making Suitable for Canning as per Drg (FD-279) by making holes for canning complete all as specified and directed.
CHAUDHARY FURNITURE HOUSE
Sunny Furniture Centre
Laxmi Furnitures & Engg
M/S AMAR ELEKTRO CENTRE
Bidder Name
VARAROHA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .