REPAIR OR REPLACEMENT TO JOINERY, WINDOW GLASS

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4.00 Sqm each. Including hold fasts and PCC block all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each. Including hold fasts and PCC block all as specified.

Taking down Shutters of any description exceeding 1 sqm but not exceeding 2.0 sqm for each leaf all as specified.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix as in repairs powder coated anodised aluminium frame (section weighting not less than 1.40 Kg/mtr) made of square/ tubular aluminium section for door with one or more riveted jointing cleats for fixing etc. and provision of aluminium door shutter (single/ double shutter) including necessary joining cleats, glazing clips, rubber gasket aluminium anodised snap beading, screws, necessary hold fast including concreteing 1:2:4 type B0 using 12.50 mm graded stone aggregates, aluminium hinges 3 nos 100 mm long for each shutter, 150 mm long aluminium floor door stopper,necessary locking arrangement, both side 150 mm cleat type aluminium handle including 5.5 mm thick tinted glass pane area exceeding 0.50 sqm in each pane fixed in panels with aluminium guard bar complete as directed by Engineer-In-Charge.

Supply and fix as in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 kg to 80 kg and fixed complete all as specified.

Supply and fix as in repairs powder coated aluminium window sliding type two/three track (one gauge and two glazed shutter) aluminium sections weighting not less than 0.55 kg per mtr for shutter and aluminium sections weighting not less than 1.67 kg per mtr for frame including necessary jointing cleats , glazing cleats, rubber packing, screws, handle, locking arrangement etc. complete and 5.50 mm thick tinted glass and deco grill complete all as directed.

Supply and fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified.

Material and labour for second class hardwood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and fix 40 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sheet glass, ordinary quality, in squares not exceeding 0.5 sqm each pane complete all as specified.

Supply and fix 30 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Supply and fix stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fix small fittings second class hardwood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cucm each complete all as specified.

Material and labour for prepration new or previously untreated wood or wood base materials of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix as in repairs 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 100 mm long aluminium alloy handles, cast type, anodized all as specified.

Supply and fix 75 mm long aluminium alloy handles, cast type, anodized all as specified.

Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for 1 mm thick wall care putty on wall complete all as specified.

Material and labour for preparation new wall surfaces and applying two coat of acrylic distemper over a coat of chalk whitening as a priming coat with roller finish complete all as per manufacturer instruction

Material and labour for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engineer-In-Charge.

Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of existing roof padding including roof treatment complete carefully by cutting, chiselling etc cleaning the surfaces by scrapping, booming brushing etc and removing the rubbish from site to a distance exc 50m and n.exc 100m all as directed by the Engineer-in-Charge and M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacture's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing coat of bitumen primer @ 0.40 Kg/Sqm complete in horizontal and vertical surfaces of sunken floor. (iii) Providing coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm over primer surfaces alongwith aluminium paint @ 0.11 Kg/Sqm over the APP. (iv) Providing a layer of APP based polymeric membrance of approved manufacturer, 4mm thick reinforced with polyester non wooven fabrix (weighing not less than 150 gm/ Sqm) laid by torch application method, side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's insructions and provided upto a height o 60cm in the parapets and inserted inside the parapets by cutting a groove and finished by membrane flashing complete all as directed.

Supply only LWPC

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fix 0.63 mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified.

Supply and fix 0.63 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified.

Dismantling boarding, any description, fixed in any position with screws all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge.

Material and labour for 7 to 8 mm thick joint free premium quality matt finished coloured ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified.

Material and labour for 7 to 8 mm thick joint free premium quality matt finished coloured ceramic tiles size of each tiles should be 400 mm x 400 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

Dismantling timber scantlings 40 sqcm and over in section for unframed work, in any position all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed.

Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong

Taking up or down water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.

Taking up or down water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete all as specified.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL STEEL/ PRAKASH

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL STEEL/ PRAKASH/ Surya Roshni ltd/ Bansal/ Nezone Tubes Ltd

Material and labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

Supply and fix 50 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix 125 mm size rim latch with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed complete all as specified.

Supply and fix ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified.

M/S BISWA CONSTRUCTION

M/S DEEDAR ENTERPRISE

S K ENTERPRISE

kapoor and co

M/s Gupta Construction

madan enterprise

MAHINDER ELECTRICALS