SPECIAL REPAIRS TO BLDG NO P 08 UNDER GE EAST LUCKNOW

M&L for Post construction anti termit treatment of soil under existing floors by using emulsion @ one Litre per hole, 300mm apart including drilling and plugging 12mm dia holes with white cement or cement mortar 1:2 to match the existing floors complete all as specified and directed by Engr-in-Charge.

M&L for Post construction anti termit treatment along the external wall on the junction of wall and floor below concrete or masonry apron by using emulsion @ 2.25 litre per metre, 300mm apart and 300mm depth including drilling and plugging 12mm dia holes with white cement or cement morter(1:2) to match the existing floors complete all as specified and directed by Engr-in-Charge.

M&L for Post construction anti termit treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50ltr /hole by drilling 6mm dia hole at a down ward angle of 45° degree at 150mm centre to centre and sealing the same by wood filler complete all as specified and directed by Engr-In-Charge.

M&L for scraping and cleaning of Wooden doors / wall panelling to remove existing polish filling putty or the required hardners for repairing of any wooden marks , scratches or scars and treated with putty /primer to obtained similar texture and mallamine coating on the surface with approved shade on the surface doors to obtain smooth and uniform looking complete all as specified and directedd by Engr -in-Charge

M&L in repair for MAPLE Hard wood flooring with FIBA/BWF certified DIN tested prestige maple hard wood floor power sleeper in size 20mmX(63.5mm to 83mm) jointed with tongue & groove over power sleeper of size 38mmX63.5mmX1.22m fixed at spacing @ 230mm C/C fixed over 19mm power pad fixed with 180 microns polythene sheet over IPS surface , sealed and finished complete all as specified and as directed at site

S&F for 50 mm wooden slats blinds of approved quality with head rail of extruded anodized high strength aluminium alloy. head rail shall have 25mm, decorative insert on either side of head rail. Control units shall be ‘Derlin’ (Celon) and shall be of tilting control and traverse code pulleys. The runner shall moulded from ‘Derlin’ (celon) with an antifriction additive. The spacer shall be made of stainless steel brackets for installation to 50 mm wooden slats be complete all as specified & directed.

M&L for Providing and fixing false ceiling comprising aluminum/GI T-grid main runners (24x38mm, min. 0.33mm thick), cross-T (24x28mm), and perimeter angle (24x24mm, 0.4mm thick) for cove type Pop false ceiling , suspended with GI cleats and 4mm adjustable rods, all pre-painted. Fixing 20SWG hexagonal wire mesh on the grid for the required coves/shapes. Applying minimum 20mm thick POP, forming all coves and regular ceiling areas, finished smooth, showing in the presence of any light surface of any type of shape and design and any upto 3 level of cove in all respects and heights of celling is up to 4.5 m, including cut-outs and finishing; complete all as specified and directed as per direction of Engineer-in-Charge

All as per item no (7) above but for forming double-curved/oval/complex any type of designer POP coves or domes using additional wire mesh and POP (50mm total thickness), finished as per approved details complete all as specified and directed.

M&L for Providing and forming double-curved/oval/complex designer POP cornice or coves of any shape, up to 6 to 8 inch (150 to 200 mm) diagonal , and applying layers of POP in total average thickness of 30mm, finished smooth as per approved design including all necessary staging, scaffolding, labor, materials, tools, and tackles, at any height and location in the building, complete in all as specifed and directed.

M&L for Providing and fixing 65 mm thick PVC moulding (of approved section, make, and colour) to wall surfaces by pasting with high-strength syenthetic resin adhesive (such as Fevicol Probond), including surface preparation, fixing, and finishing as per approved design complete all as specified and as per direction of Engineer-in-Charge,

M&L for Providing and fixing double leaf partly glazed with CNC cutting and design of panelled door shutters of overall size comprising frame and shutters made of seasoned hardwood (1st class), shutter thickness 40mm, upper portion glazed with 4mm thick frosted glass panels fixed in wooden beading, lower portion panelled with 12mm thick marine plywood/veneered board, including all required hardware approved quality (brass hinges, brass handles, brass tower bolts, mortice lock), and finished with two or more coats of melamine polish over a coat of wood filler, complete in all respects as directed by Engineer-in-Charge and all as specified.

M&L for providing a CNC-cut wooden flush door with Melamine painting should be a solid core door typically 30 mm thick, constructed with a core combining a flush door and a sandwich of one side 16mm HDHMR board and the other side with 4mm thick veneer face panels that comply with IS 710 for BWP grade or IS 303 for MR grade plywood; edges should be lipped with solid timber or equivalent, with precision CNC routing for decorative design on face panels; Melamine paint finish provides a smooth, durable surface resistant to moisture and scratching; the door dimensions must conform within +/- 5mm for length and thickness within +/-1mm , with flatness and squareness verified by standard tests like impact, edge loading, screw withdrawal, and humidity resistance tests; adhesive bonding between core and face panels must ensure no delamination for glue adhesion tests; hardware specifications including hinges and locks should be incorporated; this comprehensive specification ensures structural integrity, aesthetic value, and durability complete all as specified and directed by Eng-in-charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and cement screed/mortar rubish out side premises complete all as specified and directed.

M&L for Glazed colour digital ceramic wall tiles in vertical surface of size 300mm x 600 mm x 7 to 8mm thick set and jointed, Tiles shall be of approved make colour, and shade, fixed with high polymer modified quick set tile adhesive (water based) over prepared and leveled surface. Installation must include spacers for uniform grout lines. All joints to be filled with approved chemical/eopxy grouting compound, matching pigments included, with complete cleaning, curing, and finishing as per manufacturer's instructions and all as per Engineer-in-charge direction. (Note :- Work must include surface preparation, cutting, edge finishing, mitering, chasing if required, and clearing debris out side premises complete all as specified and directed)

M & L for snow white coloured ceramic non-skid/ Anti skid floor tiles of size 600mmX600mm 8-10 mm thick laid in floors, Tiles shall be of approved make colour, and shade, fixed with high polymer modified quick set tile adhesive (water based) over prepared and leveled surface. Installation must include spacers for uniform grout lines. All joints to be filled with approved chemical/eopxy grouting compound, matching pigments included, with complete cleaning, curing, and finishing as per manufacturer's instructions complete all as specified and directed Engineer-in-charge direction. Note:-(Work must include surface preparation, cutting, edge finishing, mitering, chasing if required, and clearing debris.

M&L for Double ultra charge vitrified floor tiles of size 1200x1200 mm x 8 to 10mm thickness as specified by manufacturer, with water absorption less than 0.08% and conforming to IS:15622. Tiles shall be of approved make colour, and shade, fixed with high polymer modified quick set tile adhesive (water based) over prepared and leveled surface. Installation must include spacers for uniform grout lines. All joints to be filled with approved chemical/eopxy grouting compound, matching pigments included, with complete cleaning, curing, and finishing as per manufacturer's instructions complete all as specified and direction of Engineer-in-charge direction. (Work must include surface preparation, cutting, edge finishing, mitering, chasing if required, and clearing debris as per direction of Eng-in-charge.

All as per item no 16 above but as in dado/skirting etc over 10mm thick rendering in CM 1:3, complete all as specified and as directed.

Dismantling of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.

Supply and installation & testing of Botticino Marble tiles of premium quality(Classico/Fiorito) Italian origin of approved make of 18-20mm thickness with mirror polished finish size 4'x8' or all as direct in by Eng-in-charge, Tiles shall conform to ASTM water absorption less than 0.1%, compressive strength minimum of 10,000 psi, consistent beige colour and vein pattern matching approved sample. Tiles shall be packed and delivered securely and installed with adhesives and grouts suitable for marble flooring and skirting Warranty for defects and workmanship for minimum 24 months is aplicable complete all as specified and directed.(Note:-Marble tiles will be tested before installation at floor and skirting,breakage seen the same will be replaced by contractor without any coast to Govt)

M&L for machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed.(Note:- Cement screed bed will be measured and paid separately under respective item.)

M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and as directed.(Note:- Cement morter rendring/backing will be measured and paid separately under respective item.)

M&L for elegant absolute black granite tile18-20mm thick machine cut mirror polished bedded and jointed with grey cement slurry and pointed with white/coloured as in floor and cement with admixture of pigment to match the shade of granite stone including cutting and polishing etc complete all as specified and directed.(Note:- Cement screed bed will be measured and paid separately under respective item.)

All as per item no 22 above but as in dado/skirting complete all as specified and directed.(Note:- Cement morter rendring/backing will be measured and paid separately under respective item.)

M&L for 18-20mm thick elegant absolute black Granite (of any type) work (table rubbed and polished) used in platforms/stair case/ Countertop one piece including laid over 20mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified & directed

M&L Complete polishing treating the old surface of granite and kota stone with grinding rubbing and bees wax polishing with five time cutting with using carborundum stone & finished mirror polish by cutting machine complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes complete all as specified and as directed by the Engr-in-charge.

M&L for 15mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes complete all as specified and as directed by the Engr-in-charge.

M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces to recive top layer complete all as specified and as directed by the Engr-in-charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) 25 mm thick levelling course as in floor finished surfaces fair and rough to receive tile complete all as specified and directed. by Engr-in-Charge

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even and Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and the same shall be filled with bitumen mastic (1:3).complete all as specified and directed.

M&L for Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade "A."complete all as specified and directed.

Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing RCC (reinforcement cement concrete) 1:1½:3 (using 20mm graded crushed stone aggregate) as in slabs / beams /column in floors balconies,canopies, desc slabs and the shelves and the like.complete all as specified and directed.

M&L for RCC chajjas/Slabs 1:1½:3 type B-1 (using 20mm graded crushed stone aggregate) as in approved design complete all as specified and directed. by Engr-in-Charge

M&L for Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge

M&L for Formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but n.exc 10cm wide rough finish surface of concrete complete all as specified and directed.

M&L for Form work to edge of concrete flats, breaks in floors, opening in concrete walls,floors and roofs and side of RCC/PCC bands in walls ad similar works n exc 20cm thick,complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia.complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking bending and binding with mild steel (annealed) wire not less than 0.90mm dia as in spacers/stirrups complete all as specified and directed.

S&F in repair to the any white/existing EWC/IWC has to be converted into a wall hung WC snow white of size 380mmX515mmX360 mm with soft close snow white seat cover alongwith all accessories fixed to wall of approved make complete all as specified & directed. Make:- Jaquar / Grohe / Kohler

S&F slim concealed flushing cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing plate) of approved make complete all as specified & directed. Make:- Jaquar / Grohe / Kohler (Note:- any demolition of wall and their making good as per existing colour and shade of wall for concealing cistern will be deemed included in quoted rate)

S&F control plate segment chrome plated flushing plate for concealed flushing cistern of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair 15mm bore high flow Concealed fitting-2 Way Diverter (chrome) with Spouts of brass Bib Cock with auto closing system and built in control cock with wall flange of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair Counter top wash hand basin of size 495mm x 395mm x 150 mm as approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair 15mm bore CP brass Pillar cock with wall flange of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair CP brass 32 mm dia waste coupling of 130mm height for WHB of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair CP brass 32mm bore bottle trap (with internal partition) with 300mm & 175mm long wall connection pipes & Wall flanges of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair 15mm bore CP brass Angle Valve stop cock with wall flange of approved make complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides of approved make complete all as specified and directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair soap dish snow white complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repair single towel rail 600mm long complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F in repairs glass shelf assembly complete all as specified & directed. (Make:- Jaquar / Grohe / Kohler)

S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or half/quarter turn handle complete all as specified and directed.

S&F Grating doom 125mm dia with waste hole of (minimum weight 40 gms) complete all as specified and directed.

S & F in repair Vitreous China ceramic Wash hand basin white, flat back, size 630mm x 450 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand.complete all as specified and directed.

S & F in repairs 32 mm bore waste pipe for WHB, Sink, Urinals etc complete all as specified and as directed.

Supply , Fabrication and fixing of modular wardrobe/ cupboard made out of 16 to18 mm thick HDHMR boards of one side laminated fabric of any colour and other side white complete all is specified and all as directed by Eng-in-charge.(Design and pattern as approved by GE)

Supply , Fabrication and fixing of 8 mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of modular kitchen cabinet and wardrobe/ cupboard, (Design and pattern as approved by GE) complete all as specified and as directed.

M&L for Providing and fixing 0.8 mm to 1.0 mm thick PVC laminates of approved color, shade, or texture (Design and pattern as approved by GE) on all sides of HDHMR boards of thickness 8 mm, 16 mm, and 18 mm. The laminates shall be cut and fixed to the required size and shape, ensuring proper bonding and alignment so that no bulging or unevenness occurs after drying. Fixing shall be carried out using Fevicol Pro-Bond adhesive or equivalent, and edges shall be rounded smoothly using a router machine to achieve a uniform and fine finish complete all is specified and as directed.

M&L for Providing and fixing 0.8 to 1 mm thick PVC banding tape on all thick side of HDHMR boards of thickness 8 mm, 16 mm, and 18 mm, ensuring proper rounding of edges. The PVC tape shall be in matching shade with the existing laminated surface. Fixing shall be done using Fevicol Pro-Bond adhesive or equivalent, followed by edge rounding with a router machine to achieve a smooth finish complete all is specified and as directed.

S&F for fancy type stainless steel bright polished handles oval type of size 150 mm size, complete all the specified and as directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F of wardrobe locks of brass metal including keys sets (Make:- Hettich / Hafele / Godrej) complete all as specified and as directed

S&F for magnetic catches with steel body 'H' type fixed to shutter (Make:- Hettich / Hafele / Godrej/Ebco/Blum) complete all as specified under directed

S&F for soft closure clip on 3D Adj hinge L-Bihari with 3 hole mounting plate opening angle -100 finish nickel plate 50,000 cycle test of premium quality, fixed in door/ cupboard shutters complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F for 20" Full extension ball bearing sliding channel have minimum Weight Carrying Capacity: 35Kg of premium quality, fixed in kitchen cabinet/Wardrobe drawer complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F 6" inch Kitchen Plain Wire Basket of size L-378mm x D-500mm x H-150mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures of premium quality, fixed in kitchen cabinet complete all as specified and directed (Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F 4" Kitchen Plain Wire Basket of size L-378mm x D-500mm x H-100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures of premium quality, fixed in kitchen cabinet complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F Kitchen Cutlery wire Basket of size L-378mm x D-500mm x H-100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures of premium quality, fixed in kitchen cabinet complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F Kitchen CUP & Soucer wire Basket of size L-378mm x D-500mm x H-100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures of premium quality, fixed in kitchen cabinet complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

S&F Kitchen Bottle pullout Wire Basket of size L-150mm x D-500mm x H-450mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures of premium quality, fixed in kitchen cabinet complete all as specified and directed.(Make:- Hettich / Hafele / Godrej/Ebco/Blum)

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not 4 Sqm each including iron mongries complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each including iron mongries complete all as specified and directed.

Taking down shutters of any description but exc 1 sqm and not exc 2 sqm each and refixing in same opening with new iron mongries complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per direction of Engineer-in-Charge and all as specified Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (b)The work for WPC frame shall include the following and quoted unit rates deemed included the following aspects. (i)The work pertaining to WPC frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ii) The contractor shall upload with the documents under T.Bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected.

M & L for providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of required size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge. Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (b)The work for WPC frame shall include the following and quoted unit rates deemed included the following aspects. (i)The work pertaining to WPC frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ii) The contractor shall upload with the documents under T.Bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per direction of Engineer-in-Charge, complete all as specified and directed. Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (b)The work for WPC frame shall include the following and quoted unit rates deemed included the following aspects. (i)The work pertaining to WPC frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ii) The contractor shall upload with the documents under T.Bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected.

Providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges complete all as per direction of Engineer-In- Charge. Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (b)The work for WPC frame shall include the following and quoted unit rates deemed included the following aspects. (i)The work pertaining to WPC frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ii) The contractor shall upload with the documents under T.Bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected.

Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELEM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws and 2 mm thick edge moulding tape or 90 degree edge bend finish etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.complete all as specified . Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (b)The work for WPC frame shall include the following and quoted unit rates deemed included the following aspects. (i)The work pertaining to WPC frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ii) The contractor shall upload with the documents under T.Bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected.

S&F floor door stopper 150mm overall length brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engr-in-Charge

S&F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cu.cm each in 2nd class Hard Wood complete all as specified and directed.

S&F mild steel butt hinges , cold rolled mild steel of size 125mm, medium weight, complete all as specified and directed.

S&F 300mm long SS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F brass Fancy type barrel tower bolt 200mm long with bright bolts complete all as specified and directed.

S&F Brass Fancy type pressed handles 150mm, oval type, complete all as specified and directed.

M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F powder coated aluminium door with frame of size 100mmX44.5mmX 1.5mm, stile, middle and top rails of size 82X44.5mmX1.5mm thick and bottom rail of size 114mmX44.5mmX1.5mm thick including 5.5mm thick tinted glass panes/5 mm thick ACP sheet with best quality all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer (make: smart/Hindware/Godrej) etc., complete including aluminium cleals and best quality rubber beading complete all as specified and directed.

S& F of windows / Vintelator made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72mmx55mm, centre mullion should be of 72mmx50mm, section for fixed glass beading should be of 12mmx12mm and section for shutter should be of 52mmx25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20mmx40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5.0 mm thick plain float glass and S.S. Mesh for fly mesh shutter (SS Grade304 ). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes.complete all as specified and directed.

M&L in repair solid PVC wall panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiations and drawing complete all as specified and directed.

M&L in repair 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall make PVC frame as specifications and drawing complete all as specified and directed.

M&L in repair 12 to15 mm thick PVC wall louvers / panels PVC wall panelling consisting of decorative, textured pattern. The geometric design , three-dimensional look suitable for accent walls inclusive of solvent cement and fixing at site on PVC frame as per specifiations and drawing complete all as specified and directed.

M & L for factory made AAC Autoclaved Aerated Concrete blocks of size 600 mm x 300mm x100 mm thick straight or curved on plan exc 6M mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M& L for 12 mm thick Toughened glass specifications are detailed as per Indian Standard (IS) 2553, Part 1: 2018, safety glass that breaks into small, granular fragments. include resistance to mechanical shock and impact, which is approximately 4 to 5 times greater than ordinary glass. Specific technical requirements cover dimensions, tolerances, edge work, and testing procedures such as impact tests, abrasion tests, and thermal tests. including sand spary/ flim with approved letter / symbol , Floor hydrolic closer , pivot hinges, lock , handle etc complete all as specified and directed.

S & F 4.8mm thick sheet glass, ordinary quality cut in square exc 0.5 sq.m in each pane in any position and complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones.complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane complete all as specified and directed.

S&F, Frosted sheet glass 3 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) cut in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete. As in repair.

Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item no 107 above but except bricks ( bricks recovered from item No -107 by demolition shall be used) complete all as specified and directed

M&L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm of approved make and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. Make: JK cement/ Birla/Ultratech

M&L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm as approved make in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.

M&L for providing and applying plaster of paris (POP) putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

M&L applying 2 mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.

M & L for applying Two coats of Plastic emulssion paint over a coat primer on surfaces of wall of any description over 10cm width or girth, not otherwise described prepration of wall surface by filling cracks/dents with putty complete all as specified and directed. (Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means sprayers only).

M&L for painting of treated surfaces to recive two coat of distemper oil emulsion on surfaces of walls and ceiling after prepration of wall and ceilling filling cracks/dents with putty over a coat of alakali resistant primer complete all as specified and directed.

M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc complete all as specified and directed by Engineer in Charge.

All as per item No 116 above but on wooden surfaces complete all as specified and directed

M&L providing window/door will with black granite 18-20mm thick in between the chowkats fixed over cement screed bed or backing layer in cm(1:4) 20mm thick complete all specified and directed by Eng-in-charge

M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed by Engr-in-Charge. (Note:- debris/ morter shall be removed from the site immediately to out site of Mod land at his own arrengment by contracter)

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means) complete all as specified and directed

Dismantling Structural steel work including doors, gates and plate but excluding framed truss etc complete all as specified and directed by Engr-in-Charge.

S & F MS steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint.complete all as specified and directed

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W complete all as specified and directed

S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed

M&L for pre painted galvalume aluminium zinc coating having GI based corrugated steel sheets 0.60mm thick(base metal thickness 0.50mm) of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed by Engr-in-charge.

S&F mild steel screwas bolt (Machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shunk 11-15mm and length of bolt exec 5 cm and n exec 10cm..complete all as specified and directed

S&F in repair mild steel flat iron as wind tie for roof including necessary drilling for securing bolts etc complete all as specified and directed

M&L for painting to new steel surfaces exc 10cm width or girth with Two coat of syenthetic enamel paint of approved tint over a coat of red oxide primer including preparation of new surfaces.complete all as specified and directed

Dismantling of CI pipes joint CM & taking out of branches if required complete all as specified and directed

S&F in cast iron soil sand cast pipes waste and vent pipes in any lenth with or without ears, jointed with lead joints, fixed to wall or laid in trenches / in floors (bore of pipe 100 mm).complete all as specified and directed

S&F in cast iron soil sand cast pipes waste and vent pipes in any length with or without ears, jointed with lead joints, fixed to wall or laid in trenches / in floors (bore of pipe 75 mm).complete all as specified and directed

S&F 75 mm CI bends any radius, diminishing pieces or tapers of any description complete all as specified and directed by Engr-in-Charge.

S&F 100 mm CI bends any radius, diminishing pieces or tapers of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement, fixed in repair.complete all as specified and directed

Demolition and breaking up or taking down PVC/AC/CI/SSW 110/100/75 mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified and directed

S & F 75mm mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.complete all as specified and directed

S&F in repairs 110 mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.

S&F in repairs 110 mm bore bends piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) 75 mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) 75 mm bore bends piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as directed by Engr-in-Charge.

S&F 75mm cast iron Nahani trap, with gratting including jointing to waste pipe fixed in cement concrete type B-0 using 125mm graded crushed stone aggregate(1:2:4), fixed in repair.complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed

S&F 16mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with & including all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

S&F 20 mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with including all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cm 1 : 3 width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.

Dismantling existing water tank of capacity 500ltr capacity and removing to store complete all as specified and directed

S&F rotational moulded polyethylene water storage tank ISI Marked double layered(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs complete all as specified and directed

S&F in repairs 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and directed

S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia complete all as specified and directed

S&F in repairs CPVC 16mm bore dia union suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and directed

M&L for Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following manners complete all as specified and directed (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product and grouting around the inserted pipes by porable grout as directed by Engr-in-Charge. (d) Make angle fillets by using PCC 1:2:4 type B0 and on all corners. (e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Nerolac Perma Super 2K/STP/Asian of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min) 3.Hydrostatic Pressure - 4bars as per ASTM D 7088, 4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1mm in two coats. Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed. (f) Providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate mixed with intergral waterproofing compound (Cement + Nerolac Perma) as per manufacturer instructions in sunken slab for making slope to wrap hole. (g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds completeall as specified and directed by Engineer-in-charge Note: Contracter will be provide labour for clining for old rubbish/mortar and fittings of all internal fitteings such as GI tubing, valve stopper, wash hand basin, nahani trap/floor trap after sunken flor treetment under coted unit rate.

M&L Providing PCC 1:7:12 type F-2 using 40mm graded stone aggregate in sunken slab .complete all as specified and directed

Dismantling brick tiles or terracing tiles, single layer of roofs and old APP removal including mud pushaka etc roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed

M&L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs/padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc complete all as specified and directed

M&L for screed bed 15mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using Liquid WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. NOTE:- Liquid WPC shall be measured and paid seperately under respective item)

M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- complete all as specified and directed (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry. (b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption having below properties:- 1. Elongation - 500%-600% 2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm. Note :(a) The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. The work for Roof treatment shall include the following and rates quoted by bidder shall include same. (b) The work pertaining to roof treatment shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like PU primer etc after approval by the GE. (c) The contractor shall upload with the documents under T- bid cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be Rejected. (d) Corner in between parapet and roof shall be seated properly,so that leakage will not come through Joints.

S&F powder coated aluminium glazed ventilator ,Half fixed type and half fixed glass louevers with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,including dismantling complete all as specified and directed

M&L for providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

S&F in repair 28 mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed

M&L false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire complete all as specified and directed

M&L plain gypboard false ceiling at all height of 12.5mm thick tapered edge gypsum plain board confroming to IS : 2095 - Part I, including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms / sqm (both inside inclusive ) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, ther flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required sixe and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made of 2.64mm dia x 230mm long G.I wire at every junction complete all as specified and directed.

Dismantling plain asbestos cement (corrugated, semicorrugated etc ) sheets in roof coverings complete all as specified and directed.

Supply only liquid water proofing compound in levelling course of roof pading complete all as specified & directed by EIC.

ELECTRIFICATION WORK Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 43 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- Incoming MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. Outgoing MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 08 Nos.

M&L in factory made Pantone 7541C shade powder coated distribution board SP & N 12 way 100 Amp bus bar fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates complete all as specified and directed

M&L in factory made powder coated distribution board SP & N 8 way fabricated of CRCA sheet with metal door, 100 Amp bus bar (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties complete all as specified and directed

M & L in factory made powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable managemen complete all as specified and directed

Supply and fix cast aluminium heavy pole designer leg and border designer base finished with polyurethane paint (with prior treatments) diamtr of one leg is approx 76mm outer dia for spiogot entry 60mm 03 Nos "T" shaped bolts with nuts and washers provided for concrete foundation , total length of the pole incl base and legs (base x 03 Nos legs) is 2463 MM (Appx 8 fit 1 inch ) with fully cast aluminium finish polurethane paint( with prior tretments) suare junction with max projection breadth of 625 mm suitable for two number post top lantren with polyurethane ( with prior treatments ) Paint with arylic window cover total length 533 mm and breadth 228 mm.B-22 brass provided with qaluminium cover incl PCC 1:2:4 using 20mm graded crushed stone aggregate of (size 600 x 600 x 600 mm ) foundation, , nut bolts, connecting up complete all as specified and directed

Excavation in trenches in soft/lose of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable under ground cable complete all as specified and directed

Returning, filling in, soil and spreading, in layers not exceeding 25 cm thick complete all as specified and directed

Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed & complete . Note:- contracter will provide the own arrangement to remove surplus soil outside Nod land where directed by Eng-in-charge.

Supplying and laying bricks common brunt clay building bricks sub class B laid across the cable with equal to lenth incl removing of old bricks to stone yard complete all as specified and directed

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. Note:-Punned down thikness of 18 cm shall be considerd for mesurement& payment)

Supply, laying, jointing, testing and commissioning in replacement of size 70 Sqmm 3.5 Core cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches,on pole complete all as specified and directed

Supply, laying, jointing, testing and commissioning in replacement of size 35 Sqmm 3.5 Core cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches,on pole complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.0 core complete all as specified and directed

S & F in replacement street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of flat iron 40 x 6mm with nuts bolts & washers for fixing on wall complete necessary fixing arrangements on pole incl taking out old U/S bracket complete all as specified and directed

Supply and fixing GI pipe light grade 40 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking down old unserviceable GI pipe complete all as specified and directed.

Supply and fix AC Modular socket with MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB complete all as specified and directed

M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified and directed

M&L in replacement of MCB Single Pole & Neutral MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified and directed

M&L in replacement of MCB Three Pole & Neutral MCB 63 Amps, 415 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified and directed

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and sunk zinc coated pressed steel terminal box 1.00 mm thich screws etc and making good to the disturbed surfaces to match the existing complete all as specified and directed

All as per serial item No 192 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.complete all as specified and directed

All as per serial item No 192 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.complete all as specified and directed

All as per serial item No 192 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp including provision of one 1.5 smm copper wire from DB to switch board for mains .complete all as specified and directed

All as per Serial Item No 192 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F in replacement Switch Modular 6A single pole, one way, 1 module complete all as specified and directed

S&F in replacement Switch Modular 16A single pole, one way, 1 module complete all as specified and directed

S&F in replacement Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed

S&F in replacement Modular White cover plate with frame,12 module complete all as specified and directed

S&F in replacement Modular White cover plate with frame,8 module complete all as specified and directed

S&F in replacement Modular White cover plate with frame,4 module complete all as specified and directed

S&F in replacement Modular White cover plate with frame,3 module complete all as specified and directed

S&F in replacement Modular White cover plate with frame,2 module complete all as specified and directed

Supply and fixing of electronic fan step regulator, 120W 2 module suitable for existing building fan complete all as specified and directed

Supply and fix LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate housing enviromental friendly, energy efficient complete all as specified and directed

Supply and fix LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate housing enviromental friendly, energy efficient complete all as specified and directed

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50mm x 25 mm size complete all as specified and directed

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 luminors and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75000 buring Hrs with integrated optical cover. Street light should have standalone lighting control system with,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceeding max 2mins/year, clock retention upto five years, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 complete all as specified and directed

Supply and fix LED slim design 36W LED, 2' x 2' recessed square down lighter with superior light output and intergral driver higher energy saving complete all as specified and directed

Supply and fix in replacement LED 40/36 watt light pureline slim suspended 50mm suspended (hanging type) aluminium extruded linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing with similar finish after filling of cutting space with Birla care wall putty & cement morter in 1:6 including taking out the unserviceable sub main wiring complete all as specified and directed

Supply installng, testing and commissioning floor mounted LT panel out door type of suitable size cubical type factory made, weather and vermin proof made out of CRCA sheet 3.00 mm thick appropriate size of panel 0.6mm x 0.6mm x 0.45 M and 04 Nos legs on angle iron 50x50x6mm each 45 cm long panel duly powder coated in side and out side with 7 stage tank process heaving insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B-1 using (20 mm graded crushed stone aggregate) with gland packing to provided for cable including following accessories complete as under.complete all as specified and directed (i) Aluminium bus bar strip of capacity 400 amps fixed on epoxy insulator - 04 Nos (ii) Incomming MCCB of current rating 250 Amps with adjustable thermal release 4 pole 415 volts 25 KA repturing capacity - 01 Nos. (a) Out going MCCB TPN 4 pole of current rating 125 Amps 415 volts 16 kA repturing capacity - 3 Nos. (b) Out going MCCB of current rating 63 Amps with adjustable thermal release 4 pole 415 volts 16 KA repturing capacity - 01Nos. (iv) Digital voltmeter (0-500 volt) 96x96mm (v) Digital ampmeter (0-600 amps) 96x96mm incl with CT,s (vi) Set of phase indicator lamp R,Y,B with control MCB - 01 Set (viii) Danger notice plate showing shock &bones with light meter/fluorescent light paint will be provided over LT panel Note:- (a) Design of LT panel will be approved by CE before procurement by contractor. (b) MCCB & MCB shall of same make and manufacturers (c) CPRI approved panel manufacturer make will be approved by CE.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing similar finish after filling of cutting space with Birla care wall putty & cement morter in 1:6 including taking out the unserviceable sub main wiring complete all as specified and directed including taking out the unserviceable sub main wiring complete all as specified and directed

M&L shifting of old split AC after providing gas and Removing to store yard and refixing of split type AC any type and size with & including required new gas charging as per requirment & AL manufacturers i.e R-32 or R-410 and provideing new copper tube,flexible wire,remote etcon new bracket nut bolts etc.complete all as specified and directed

Material and labour for inverter sub main wiring with 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with conduit 20 mm size and including cutting of chases in wall and making good to the disturbed surfaces to match the existing with similar finish after filling of cutting space with Birla care wall putty & cement morter in 1:6 including taking out the unserviceable sub main wiring complete all as specified and directed

M & L for earthing including earth work complete with galvanised steel earth plate electrode 600mmX600mmX63mm thick burried directly in ground ( earth pit not less than 2.25 meters deep below ground level) with to edge of the plate not less than 1.5 Mtrs below normal ground level connected to galvanised earth lead 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by GI pipe all as shown in electrical pate No 5 of SSR Part I - 2009 connected to earthing test point all as specified and indicated including excavation earth work PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate chamber RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate cover 20mm dialight grade protection pipe watering pipe funnel and testing on completion complete all as specified and directed (Note: Earth strip and protection pipe upto 7.50 m length shall be deemed included in the unit rate) Note (2) Steel reinforcement and excavation earthwork shall be deemed included in quoted unit rate

M &L Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 20mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC (1:3:6 ) C-I using 20mm graded crushed stone aggregate chamber and RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- (1) PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.complete all as specified and directed (2) steel reinforcement & excavalion earth work shall be deemed included in quoted unit rate. (3) Earth lead wire and protection pipe up to 7.5m lenght in included in quoted unit rate.

Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 3 pole, 415 volts AC 25 KA Ics = 50% Icu as per IEC 60947-2ruputuring capacity complete all as specified & directed.

Taking down old U/S Bldg security/street lights/Gate lights/Bollard light/flood lights of any type any size retreived from existing site complete all as specified & directed.

Supply and fix LED gate light of 36W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Incl GI Pipe 40mm dia 0.45mtr long fixed in gate pole with PCC 1:2:4 of 0.20 mtr height and size of existing gate pole. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified & directed.

Supply and fixing LED building security light of 25W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge.