REPAIR MAINT OF JOINERIES, PLASTERING, FLOORING, PLUMBING AND OTHER MISC BR WORKS AT ZONE I AT BASISTHA UNDER GE GUWAHATI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as directed.

Taking down shutters n.exc 1.00 sqm each of any description complete all as directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

Taking down Aluminum shutters exc 1.00 sqm but n.exc 2.00 sqm each and refixing in the same opening complete all as directed.

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F Factory made second class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

S&F Factory made second class hardwood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as required and as directed.

S&F Colour coated anodised aluminium frame for dors,windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts, etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage/locks shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply only 5.5mm thick tiinted glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick tiinted glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

S&F in repair only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 125mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed.

S&F Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including 12mm thick Gypsum Board fixed with screw complete all as specified complete as required as per manufacturer’s instructions and as directed .all as specified

S&F in repair, 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in the existing ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed..

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as directed.

M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid seperately under appropiate item at Supply only rates

Supply only Liquid water proofing compound conforming to IS: 2645 specification complete all as specified and as directed.

M&L 10mm thick rendering with cement mortar (1:6) on other than fair faces of brick work finishing the surface fair and even complete all as specified and as directed.

M&L prepration of new plastered surfaces of wall applying two coat of oil emulsion distemper over a coat of Chalk whiting complete all as specified and as directed.

M&L prepration of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of ceilings by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling by scrubbing down using electric sander machine or steel wire brushing scrapping down smokes soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper complete all as specified and directed.

Demoliation Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all asdirected.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

M&L Non skid Ceramic coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

S&F in repair, Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

S&F 25mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, including necessary taking down of exsisting old pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

S & F 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed.

S & F 75mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (confoirming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

Disconnecting existing tanks of capacity 500 ltrs capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including writing date of cleaning on tank using stencil in white syntheic paint height not exc 10cm complete all as specified and as directed

Disconnecting existing tanks of capacity 1000 ltrs capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including writing date of cleaning on tank using stencil in white syntheic paint height not exc 10cm complete all as specified and as directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F in repair Vitreous China, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S & F in repair rimless single piece WC with soft UF closing slim seat cover, hinges, and accessories, cistern, of size 380x725x690mm with S trap 300mm complete all as specified and as directed.Make JAQUAR cat no ONS-WHT-10853S300UFSM or equivalent as approved by GE from list of approved makes.all as specified and as directed.

S&F in repair, Wall hung half pedestal basin with fixing accessories, Size: 580x460x210mm, complete all as specified and as directed Make-JAQUAR CAT No-SLS-WHT-6801/ SLS-WHT-6301 or equivalent as approved by GE from list of approved makes.

S&F in repair, Hand shower (health faucet) with meter long easy flexible tube & wall hook chrome finish with NRV (Back flow Preventer) complete all as specified and as directed Make-JAQUAR CAT No-ALD-CHR-579 or equivalent as approved by GE from list of approved makes.

S&F in repair, towel rack with lower hanger stainless steel with hook complete all as specified and as directed Make -JAQUAR CAT NO AHS-1581H or equivalent as approved by GE from list of approved makes

S&F in repair, toilet paper holder with flap complete all as specified and as directed Make-JAQUAR CAT No-AQN-7753 or equivalent as approved by GE from list of approved makes.

S&F in repair, Reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as sdirected. Make PARRYWARE Cat no C 8611 or equivalent as approved by GE from list of approved makes.

S&F in repair, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repair, 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe including 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair, 10 litres capacity dual flush PVC flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe including 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed Make PRAYAG Cat no MACASA-703 or as approved by GE from list of approved makes.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F in repair , aluminum anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repair 15mm bore chromimum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair, 15mm angle stop cock with wall flange all as specified and as directed make -PRAYAG CAT NO--7610(MACASA) or equivalent as approved by GE from list of approved makes.

S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed

S&F in repair, Florentine Pillar cock with extended lever handle complete all as specified and as directed Make-JAQUAR CAT No-FLR-5031N or as approved by GE from list of approved makes.

S&F in repair, Florentine Bib cock with extended lever handle and wall flange complete all as specified and as directed Make-JAQUAR CAT No-FLR-5043N or as approved by GE from list of approved makes.

S&F in repair, Single lever surgical purpose elbow action sink mixer (wall mounted) with extended operating lever, connecting legs and wall flanges complete all as specified and as directed Make-JAQUAR CAT No-FLR-5166 or equivalent as approved by GE from list of approved makes.

S&F in repair, PVC urinal waste pipe 38/40 x 800mm complete all as specified and as directed Make-PRAYAG CAT No-3281 or equivalent as approved by GE from list of approved makes.

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Demoliation of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 99 mentioned as above

M&L for sweeping clean and washing down with water to remove dust, etc., Brushing neat cement slurry with 3.0kg of cement per sq. metre and providing 40mm thick cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in roof padding/slope correction finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&L providing plain cement concrete type B-1, (1:2:4), (using 20 mm graded stone aggregate), as in Coping, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F in repair, 18/19mm Block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work complete all as specified and as sdirected.

S&F in repair, Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. Make Godrej Cat No D 80 or as approved by GE from list of approved makes

PRITHWI BUILDERS

M/s L A Enterprise

M.G. ENTERPRISE