RequiredAnnual Turnover
RequiredOEM Authorization Certificate Bid to RA enabled No Portable Toilet ( 6 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use
RequiredKnocked Down To Be Assembled At Consignee Site By The Seller
RequiredKnocked Down To Be Assembled At Consignee Site By Consignee Himself Number of Compartments 1 - seater portable toilet 1 - seater portable toilet
Required2 - seater 1/13 portable toilet
Required3 - seater portable toilet Type of WC Indian with steel base Indian with ceramic base
RequiredIndian with steel base
RequiredIndian with FRP
RequiredIndian(FRP) with integrated facility(With floor)
RequiredEuropean with ceramic base
RequiredEuropean with steel base Number of WC 1 1
Required2
Required3
Required0 Number of Urinals ( For Gents and Ladies to be mentioned separately ) 1 1
Required2
Required3
Required0 Number of Bathrooms 1 1
Required2
Required3
Required0 Water facility By mean of overhead tank(Capacity 200Ltrs) By mean of overhead tank(Capacity 200Ltrs)
RequiredBy mean of overhead tank(Capacity 300Ltrs)
RequiredBy mean of overhead tank(Capacity 500Ltrs)
RequiredWith running water connection
RequiredDirect connection from external supply Wash basin 1 No. in each WC unit(inside) * Sewage facility Sludge tank(Capacity 200 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 1-seater and 2-seater) Sludge tank(Capacity 200 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 1-seater and 2-seater)
RequiredSludge tank(Capacity 400 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 2-seater and 3-seater)
RequiredSludge tank(Capacity 500 Ltrs) with 75mm outlet facility through butterfly valve and hosepipe(for 3-seater)
RequiredTwin Leech pit with insepction chamber
RequiredNo sewage facility ventilation One No. One No.
RequiredTwo No.
RequiredFull size ventilation above door plus half size 2/13 ventilation on other side for cross ventilation
RequiredAll 4 - sides Lifting hook one number heavy lifting hook provided one number heavy lifting hook provided
Requiredtwo number heavy lifting hook provided
Requiredfour number heavy lifting hook provided
Requiredno lifting hook Top(roof) shape Flat * Projection of Roof 50mm projection on all the four sides 50mm projection on all the four sides
Required100mm projection from front and 50mm projection on other sides
Required50mm projection from front and 25mm projection on other sides
RequiredNO projection Installation and commissioning To be done by seller To be done by seller
RequiredTo be done by Consignee himself Plumbing and Sanitary fitting connection To be done by seller To be done by seller
RequiredTo be done by Consignee himself Electrical connection To be done by seller To be done by seller
RequiredTo be done by Consignee himself Waste extraction fittings To be done by seller To be done by seller
RequiredTo be done by Consignee himself Civil foundation No foundation required No foundation required
RequiredRequired - To be done by seller
RequiredRequired - To be done by consignee himself FRAME MATERIAL Bottom frame material 35mm X 35mm X 5mm(thick) MS angle for one seater 35mm X 35mm X 5mm(thick) MS angle for one seater
Required75mm X 37.5mm C-channel MS(for 2-seater & 3-seater)
Required35mm X 35mm X 5mm(thick) SS angle for one seater
Required75mm X 37.5mm C- channel SS(for 2-seater & 3-seater)
RequiredNo Bottom frame structure
Required25mm X 25mm X 16 gauge MS Sq. pipe and MS angle 3/13 Bottom frame support material 25mm X 25mm X 3mm(thick) MS angle (for 1-seater
Required2-seater & 3-seater) 25mm X 25mm X 3mm(thick) MS angle (for 1-seater
Required2-seater & 3-seater)
Required25mm X 25mm X 3mm(thick) SS angle
RequiredNo support structure Side panel frame material 35mm X 35mm X 5mm(thick) MS angle 35mm X 35mm X 5mm(thick) MS angle
Required35mm X 35mm X 5mm(thick) SS angle
RequiredNo side frame structure
Required25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 latest
Required38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923/latest Top(roof) frame material 35mm X 35mm X 5mm(thick) MS angle 35mm X 35mm X 5mm(thick) MS angle
Required35mm X 35mm X 5mm(thick) SS angle
RequiredNo roof frame structure
Required25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 latest
Required38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923/latest Top(roof) support frame structure 25mm X 25mm X 3mm(thick) MS angle 25mm X 25mm X 3mm(thick) MS angle
Required25mm X 25mm X 3mm(thick) SS angle
RequiredNo support structure
Required25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923/latest
Required38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923/latest Partition frame material 35mm X 35mm X 5mm(thick) MS angle 35mm X 35mm X 5mm(thick) MS angle
Required35mm X 35mm X 5mm(thick) SS angle
RequiredNo partition frame structure
Required25 mm x 25 mm x 2 mm (thick) MS pipe as per IS 4923 latest
Required38 mm x 38 mm x 2 mm (thick) MS pipe as per IS 4923/latest Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS 25mm X 25mm X 3mm(thick) flat MS
Required25mm X 25mm X 4/13 3mm(thick) flat SS
RequiredNo ventilation frame material
Required25 mm x 25 mm x 2 mm (thick) MS Flat Door frame material 35 mm x 35 mm x 5 mm (thick) MS ANGLE 50mm X 25mm of 14-16gauge rectangular MS hollow pipe
Required50mm X 25mm of 14-16gauge rectangular SS hollow pipe
RequiredNo door frame material
Required35 mm x 35 mm x 5 mm (thick) MS ANGLE Support material for Door panel fixing Aluminium U-channel of 18gauge Aluminium U-channel of 18gauge
RequiredSS U- channel of 18gauge
RequiredNo support material Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS 75mm size with 1.2-1.5mm thickness MS
Required75mm size with 0.6-0.8mm thickness SS
Required75mm size with 1.2-1.5mm thickness Chrome plated Tank holder frame material 25mm X 3mm(thick) MS flat 25mm X 3mm(thick) MS flat
Required25mm X 3mm(thick) SS flat
Required1125mm X 820mm outer ring(tubular structure)-MS
RequiredNo Support Unit understructure Supported by 4-legs of size 35mm X 35mm X 5mm MS angle with corner support of 25mm x 25mm X 3mm MS angle for 1-seater Supported by 4-legs of size 35mm X 35mm X 5mm MS angle with corner support of 25mm x 25mm X 3mm MS angle for 1-seater
RequiredSupported by 4-legs of size 35mm X 35mm X 5mm SS angle with corner support of 25mm x 25mm X 3mm SS angle for 1-seater
RequiredSupported by 4-legs of size 75mm X 37mm C- channel MS angle
RequiredSupported by 4-legs of size 75mm X 37mm C- channel SS angle
RequiredPedestal base having 890mm X 1065mm X 300mm(height) FRP molded
RequiredSupported by 5/13 4-legs of size 25 mm x 25 mm x 2 mm (thick) MS pipe with corner support of 25 mm x 25 mm x 2 mm MS pipe as per IS 4923/latest for 1 - seater
RequiredSupported by 4-legs of size 25 mm x 25 mm x 2 mm (thick) MS pipe with central support of 38 mm x 38 mm x 2 mm MS pipe as per IS 4923 latest for 2 - seater Stairs frame material No stairs 25mm x 25mm X 3mm MS angle
Required25mm x 25mm X 3mm SS angle
RequiredNo stairs Stairs material No stair material 25mm X 3mm MS flat
Required25mm X 3mm SS flat
RequiredNo stair material Door Tee material 40mm X 40mm x40mm X 5mm(thick) MS Tee 40mm X 40mm x40mm X 5mm(thick) MS Tee
Required40mm X 40mm x40mm X 5mm(thick) SS Tee
RequiredNo door Tee material PANEL MATERIAL Side panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
RequiredOutside paneling of 18 gauge MS sheet and inside paneling of 18 gauge aluminum sheet(single partition
Requiredcorrugated sheet
RequiredFitted with plastic light weight LLDPE roto molded
RequiredThe superstructure Toilet to be one piece molded plasticwalls and roof with single wall construction by Roto- molded process-fixed 6/13 on base with suitable fastners-having many nos. of embossed ribs for better strength.
RequiredOutside panelling of 22 gauge Galvanized plain sheet as per IS 277 latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862/latest ( To be 750 mm above the inside floor )
RequiredPowder coated 1.2 mm thick Galvanized Iron sheet
RequiredInsulated walls to be made of continue line sandwich panels with 0.35mm thick pre- coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Top(Roof) panel material 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
Required4mm poly carbonate sheet fitted on top
RequiredFitted with plastic light weight LLDPE roto molded
RequiredThe superstructure Toilet to be one piece molded plasticwalls and roof with single 7/13 wall construction by Roto-molded process- fixed on base with suitable fastners- having many nos. of embossed ribs for better strength.
RequiredOutside panelling of 22 gauge Galvanized plain sheet as per IS 277 latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862/latest
RequiredPowder coated 1.2 mm thick Galvanized Iron sheet
RequiredInsulated walls to be made of continue line sandwich panels with 0.35mm thick pre- coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Door panel material Single layer 3mm thick FRP 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners and Aluminium accessories (2 AI handles-1 AI tower bolt-1AI L-drop and steel sheet thickness 0.6mm 275MPA)
RequiredOutside paneling of 18 gauge aluminum sheet(corrugated sheet)
RequiredFitted with plastic light weight LLDPE roto molded
Required8/13 Single leaf shutter to be made out with PUF insulated sandwich panel – Panel to be 0.3mm thick Pre coated G
RequiredI. Sheet both side of PUF – Shutter thickness to be 20mm – Door width 600mm and Fixed with Hinges
Required22 gauge Galvanized plain sheet as per IS/277 (latest)
RequiredPowder coated 1.2 mm thick Galvanized Iron sheet
RequiredInsulated walls to be made of continue line sandwich panels with 0.35mm thick pre- coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM partition panel material Single layer 3mm thick FRP 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
RequiredFitted with plastic light weight LLDPE roto molded
RequiredOutside panelling of 22 gauge Galvanized plain sheet as per IS 277 latest and Inside panelling of 10 mm thick Cement fibre board of category 3 Type B confmg. to IS 14862/latest ( To be 9/13 750 mm above the inside floor )
RequiredPowder coated 1.2 mm thick Galvanized Iron sheet
RequiredInsulated walls to be made of continue line sandwich panels with 0.35mm thick pre- coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Floor material 5mm thick FRP material 5mm thick FRP material
Required2-3mm thick SS material
RequiredFitted with plastic light weight LLDPE roto molded
RequiredAnti skid tile finish floor inside toilet
RequiredThe double wall constructed ready-made base shall be made out with Plastics material by roto-molded process - PUF to be filled in cavity between two walls for extra load bearing - single piece molded with required outlets - special handle to be provided on two side of toilet block for easily shifting the whole Block
Required1.6 - 1.9 mm thick SS 304
Required2 - 3 mm thick SS 304 DIMENSION Cabin size(LXWXH) ± 25mm 890mm X 840mm X 1980mm (for 1- seater) * Door size(WxH) ± 20mm 585mm x 1830mm 585mm x 1830mm
Required1790mm X 655mm(Steel sheet thickness - 0.6mm 275MPA)
Required1790 mm x 700 mm (GI sheet thickness 1.2 mm) Ventilation size(WXH) 650mm X 40mm * 10/13 ± 10mm Partition height ± 20mm NO partition * Single pan size ± 10mm As per buyer's choice 580mm X 440mm with built in platform/footrest
RequiredAs per buyer's choice Stairs size ± 10mm NO stairs 610mm X 230mm having 1-step
Required610mm X 230mm having 2-step
Required610mm X 230mm having 3-step
RequiredNO stairs Leg height ±10mm 455mm 455mm
RequiredNO legs
Required350mm MISC Door locking bolts Size 100mm of MS Size 100mm of MS
RequiredSize 100mm SS Towerbolt locking Towerbolt of MS size 75mm Towerbolt of MS size 75mm
RequiredTowerbolt of SS size 75mm
RequiredTowerbolt of Aluminium size 75mm Overhead tank material made of three layer HDPE sheet made of double layer HDPE sheet
Requiredmade of three layer HDPE sheet
RequiredMade of PVC
RequiredNO tank
RequiredLoft type single layer HDPE Wash basin material made of FRP(fiber reinforced plastic) made of FRP(fiber reinforced plastic)
Requiredmade of Ceramic
Requiredmade of SS 304
RequiredNo wash basin WC material made of Ceramic made of FRP(fiber reinforced plastic)
Requiredmade of Ceramic
Requiredmade of SS 304 Towel rail/ring made of SS 304 made of plastic
Requiredmade of SS 304
RequiredChrome plated
RequiredNO towel rail Cloth hook made of SS 304 * P-trap material made of PVC(75mm) made of HDPE(75mm)
Requiredmade of PVC(75mm) Footrest(WC) material made of Ceramic integrated with Indian WC and floor made of FRP integrated with Indian WC and floor
Requiredmade of SS 304 integrated with Indian WC and floor
Requiredmade of Ceramic integrated with Indian WC and 11/13 floor
RequiredN.A Sewage tank material NO sewage tank made of FRP 4mm thick(for 2-seater & 3- seater)
RequiredTwin Leech pit with insepction chamber
RequiredNO sewage tank
RequiredHume type Septic tank
RequiredAs per buyer's choice Dia of lifting hook 20mm 20mm
Required25mm
Required30mm
Required40mm
RequiredNO lifting hook Size of Mirror 455mm X 305mm 455mm X 305mm
RequiredNO mirror Electric provision By mean of connection from main line By mean solar energy
RequiredBY mean of battery
RequiredBy mean of connection from main line
RequiredNO electric provision Sewage provision not provided * Level indicator provision N.A * Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting By PVC flush pipe to toilet seat * Soap stand SS 304 made * Tap HDPE push cock * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) To be suitably slanted towards WC for proper drainage(for Indian WC)
RequiredN.A Movement facility for 2-seater and 3-seater N.A Having two axle of 25mm X 25mm with four wheels(250mm each) made of solid rubber
RequiredHaving two axle of 25mm X 25mm with four wheels(250mm each) made of PVC
RequiredN.A Provision for vent pipe N.A * COLOUR & FINISH Colour of cabin As per buyer's choice * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * 12/13 WARRANTY Warranty period in number of years 1 1
Required2
Required3 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
