TP1-019/202-21

Amount

Clearing light jungle and disposing off to a place away from the site as directed by the Department Engineer at site including cost of all labour, lead, lift, materials T&P's etc., complete.

Dismantling and removing the existing RCC fencing post incluidng cost of lead, lift, labour, removing the concrete debris from 110 KV SS to 2 Kms etc., complete

Dismantling and removing the existing fencing post foundation for PCC incluidng cost of lead, lift, labour, removing the concrete debris from 110 KV SS to 2 Kms etc., complete

Dismantling the existing GI barbed wire fencing including cost of all materials, lead, lift, labour, etc., complete

Dismantling and removing the existing Brick work incluidng cost of lead, lift, labour, removing the concrete debris from 110 KV SS to 2 Kms etc., complete

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for Hard Gravelly soil SS

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for SDR NOT REQUIRING BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for MR & DMR NOT Requiring BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for MR & DMR NOT Requiring BLASTING

Earth work excavation for hard rock requiring wedging and chisseling and removing from site including cost of all labour, lead, lift, etc. complete and as directed by the Dept. Engineer at site.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10lit of water etc., complete.

Filling the river sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.

PCC 1:3:6, using 12-20mm HBG metal for foundation /padding without form work including cost of cement, all materials, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20mm HBG metal, for foundation concrete without form work including cost of all materials, labour charges, consolidation charges, curing, lead, lift, etc.

PCC 1:2:4, using 20mm HBG metal, for foundation concrete with form work including cost of all materials, labour charges, consolidation charges, curing, lead, lift, etc.

RCC 1:1.5:3 using 12 to 20 mm HBG metal for Gate pillar, RCC road, with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement

RR masonry in cm1:5 using random rubble stone including cost of all materials leads and lifts etc. complete.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for plinth Beam .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Lintel.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sun shade 600 mm .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof beam.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab 125mm thick.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.

Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.

Fabrication and supply of foundation bolts of 20mm dia including providing cleat at bottom and threading at top and galvanizing the top of bolt including cost of all materials, labour lead lift etc., complete.(groudting bolt length 1.2 m)

Fabrication, supplying and fixing of Templete for fixing the Foundation bolt and nut & assembling charges including cost of all materials labour lead, lift etc., complete.

Supplying and filling of stone dust with required thickness all lead and lift including and all other T&P etc., complete.

Supplying and spreading of metal jelly of size 12 mm to 20 mm to an average thickness of 15 cm and over 5 cm stone dust, including cost of all materials lead, lift watering and levelling surface etc., complete.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal with form work including cost of cement and all lead, lift, curing by using curing tank, etc., complete but excluding cost of steel reinforcement. (By using mixer machine) and as directed by the Engineer-in-charge at site. Cover slab

Supplying and filling with gravel in basements in layers, well rammed and watered, consolidated, etc., complete as per standard specification

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 12 mm thick to full width and depth of 150mm thick labour, all leads and lifts etc., complete. as per standard specification.

Providing and laying weather proof Tiles300mmx300mm size over screed concrete 1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tiles of approved quality using in cm 1:3, 12 mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc complete.

Plastering with CM 1:3, 12mm thick for ceiling, beams, sunshade and for transformer plinth including cost of all materials, curing, labour, lead, lift, etc., complete.

Plastering with CM 1:5, 12mm thick for walls and cable duct including cost of all materials, curing, labour, lead, lift, etc., complete.

Floor finsinhing with CM 1:3, 20 mm thcik over PCC 1:4:8. using 40 mm metal, 100 mm thick for Store room including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Painting out side walls with two coats of best quality exterior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

Painting the inside walls with two coats of best quality interior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Supplying and fixing of anodized aluminium fully glazed door using 101.60 x44.45x2.10mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)

Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete. For 40mm dia PVC Pipe

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 25 MM DIA PVC PIPE

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 20 MM DIA PVC PIPE

Supply and fixing 110mm dia PVC down fall pipe 4kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead, lift, etc., complete.

Supplying and fixing in position first quality and approved variety of Gun metal Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work as directed by department Engineer at site - 40 mm Dia

Supplying and fixing in position first quality and approved variety of Gun metal Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work as directed by department Engineer at site - 25 mm Dia

Supplying and fixing of GI angle size 50mmx50mmx6mm fixing at 600mm c/c for cable duct inside the control room including cost of all labour, lead, lift, etc., complete.

Providing projected border 15 cm width, with cm 1:3, 20mm thick for plinth beam including cost of all materials, labour, load, lift etc. complete.

Providing projected border 7.5cm width in cm 1:3, 20mm thick at top of parapet wall, sunshade and control room inner walls including cost of cement all other materials, labour, lead, lift, etc. complete.

Filling in foundation and basement with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Providing 8 rows barbed wire with vertical crossing, 9 nos including strectching, straightening, tensioning, tying with fence post with binding wire including cost of binding wire necessary T&P, labour, etc., complete.

supplying and fixing of 12 mm dia size bolt with thread and nut, washer, fixing the corner post including cost of all materials, lead, lift, etc., complete.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent) including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Providing false ceiling by using 12.50mm thick perforated gypsum board in panels using 6mmGI rod suspender ,16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supplying and installation of 5 star rated inverter split Air Conditioner (3 phase -2 Ton capacity) of approved make (O General/Carrier/ Voltas or equivalent) with all accessories including stabilizer with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Drilling 4½" dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 100 mm dia

Drilling 4½" dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 50 mm dia

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cble duct including cost of machinaries labour etc complete. Brick wall

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For Electronic Regulator) (SD 23)

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated Multi strand unsheathed Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm Steel switch box for 5 A 3 pin non inter locking CS plug

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work. (SD 167)

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 158)

Supply and fixing of 18W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 100 W bulb. (SD 81)

Supply and fixing of 4'40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals

Supply and fixing of fancy glass shade and 11 W CFL for BH point. (SD 77)

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 106)

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]

Check surveying and pit marking including hire charges for T&P all labour charges, lead, lift etc., complete.

Supply and Filling of Gravel for formation of approach road in main road to water logging area at tower locations (For 10 Locations)

Assempling of templates required alingment and level including cost of all materials, labour, lead, lift etc., complete.as directed by the engineer at site. GCR

Assempling of templates required alingment and level including cost of all materials, labour, lead, lift etc., complete.as directed by the engineer at site. HCR

Assempling of templates required alingment and level including cost of all materials, labour, lead, lift etc., complete.as directed by the engineer at site. KCR

P.C.C 1:3:6 concrete using 20mm HBG metal for tower foundation with outform work but including cost of cement all materials labour, lead, lift etc., complete.as directed by the Engineer at site .

P.C.C 1:2:4, concrete using 12 to 20mm HBG metal for tower foundation, tower chimney with form work but including cost of cement all materials labour, lead, lift etc., complete.as directed by the Engineer at site.

Back filling of tower pits after laying of stub-setting, concreting with excavated earth, watering and consolidation including all labour etc., complete As directed by the Engineer at site. (Tower works)

Removal of excavated earth from the tower location including cost of all materials, lead, lift, labour and Transporting charges etc., complete.As directed by the Engineer at site.

Providing Pipe type earthing to towers including all materials G.I pipe 3 m length required length of Earth wire and welded with washer at end connecting with Tower leg and all lead, lift etc., complete.As directed by the Engineer at site.

Providing special earthing arrangements for Terminal tower including necessary excavation for fixing 3m long 50mm dia GI "B" class pipe,60cm dia with 5cm shell thick of RCC collar and refilling with excavated earth mixed with soft charcoal and connect the earthstrip including all cost of materials lead lift etc complete.

Providing shoring and shuttering with CW scantling and planks including cost of all materials,labour lead lift etc complete.As directed by the Engineer at site.

De watering charges during excavation and concreting with Diesel engine/ Electrical pump including all charges for fuel, engine oil etc complete. As directed by the Engineer at site. Already sanction Estimate of Molasi 110 Kv line.

Plastering with CM 1:3, 12 mm thick including cost of cement all materials, labour etc., complete.As directed by the Engineer at site.

Labour charges for sorting out, cutting, drilling, and fabrication for KCR tower Square cross arm including cost of labour, lead, lift etc., complete. (scrap angle supplied department )

Erection of towers including sorting out of tower members, tightening punching the bolts and nuts final checking cost of all T&P all lead lifts etc complete.As directed by the Engineer at site.

Hoisting of 7units of suspension insulators including cost of transporting from store to site al tools and plants etc complete.As directed by the Engineer at site.

Hoisting of 8units of tension insulators including cost of transporting from store to site al tools and plants etc complete.As directed by the Engineer at site.

Hoisting of 8units of tension insulators with using double tension fittings including cost of transporting from store to site al tools and plants etc complete.As directed by the Engineer at site.

Providing well supported trussels up to 5m height for road crossing including cost of all materials labour lead and lift etc complete.As directed by the Engineer at site.

Providing temporary guy's in tension location including burrying etc complete.As directed by the Engineer at site for 3nos. Stay.

Painting the anti corrssive black paint

Lowering HT/LT Line during stringing of power conductor and after that again restringing the HT/LT line including all labour etc complete.As directed by the Engineer at site.

Run welding of all bolts and nuts upto bottom cross arm level and applying zinc chromate paint in welded portion including cost of all materials lead lift etc complete.As directed by the Engineer at site.

Transporting and stringing of Paying out, jointing, rough sagging,& tensioning of 2 No. ACSR Panther conductors including clipping, providing SB dampers and jumpering in tension points transport of all materials from stores to site & other accessories, labour, leads and lifts etc., complete. In Rail ways LC Condition as a spacial case.(2Wire)

Transport stringing of 2 Nos of Panther conductor, paying out, jointing, rough sagging, tensioning (Single span) under Railways LC

Labour charges for stringing of OPGW cable including clipping the cable joints, T & P's, lead, lift etc.

Transport stringing of OPGW, paying out, jointing, rough sagging, tensioning

Labour charges providing special type trussels for Railway crossing including hire charges for bomboos, tools & plants etc.complete.

Supplying and Fixing of Number plate.

Supplying and Fixing of Danger board.

Supplying and Fixing of phase plate 1 Set

Cutting and felling of big size Various type of trees

Cutting and felling of small size Various type of trees

Fabrication, supply and fixing in position of the Name Board made of steel sheet 18 Gauge (1.25mm)thick and Letter painting over the board as directed by the Engineer in charge of the work.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

M/s.Vetriconstructions

AMMASI.P

C.GOVINDAN

C.PERIYASAMY

Thulasingam

K DHINAKARAN