REPAIR AND MAINT OF EXTERNAL WATER SUPPLY SYSTEM INCL CI DI GI PIPE LINE PUMPS MOTORS FILTERATION PLANTS DOZERS AND OTHER CONNECTED ITEMS AT JAKLI RTC DHANSAL UNDER GE ARMY DHAR ROAD

Amount

Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5mtr depth and getting out for taking out CI Pipe lines, taking out/laying of CI/GI pipe lines forming bottom surfaces of excavtion to re-wired lines/gradient etc complete all as specified.

Returnning, filling in, intrenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified & directed.

Removing surplus spoil to a distance not exc 50 mtr away and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 30 cm in depth for passing of pipe line and making good of disturbed surface to match with the existing surfaces by using new material i.e bitumen, aggregate complete incl compaction of cutting portion and making good all as specified and directed

Taking out GI water tubing lines and connected unserviceable pipe and fitting includidng segregation of serviceable pipe and fittings and keep in safe custody and reuse serviceable pipe line and fitting from tranch/ in ground/under road /under PCC path etc the site of work complete all as specified and as directed of the following bore size :-

150 mm dia

100 mm dia

80 mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

M&L for GI water tubing medium grade and laid in trenches/floors/walls with running fittings complete all as specified and directed of following sizes

150 mm dia

100 mm dia

80 mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed to following bore of size including dismantling of old GM gate valve.

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

M&L construction of brick masonery valve pits of size 600x600x600 mm internal dimension with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed and including demolition of existing damaged valve pit and removing all as specified and as directed.

M&L construction of brick masonery valve pits of size1200x1200x1200mm internal diamension with brick work in cement mortar (1:4) including excavation and earth work, concrete work 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed and including demolition of existing damaged valve pit and removing all as specified and as directed.

PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of motor, pump, header etc complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of motor, pump, header etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of motor, pump, header etc, including necessary form work complete all as specified and directed

S&F in replacement of double flanged sluice valve of size 80 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 150 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 100 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 50 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete

M & L GI flange joint 150 mm bore 6/8 holes with rubber packing ring using suitable size nuts, bolts and washers, welding work complete to join two pipe all as specified and as directed .

All as per item No 18 but 100 mm dia

S&F in replacement of double flanged Non return valve of size 150 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete. Make- (Kirloskar/ upadhayay/ GDPA/BIR)

S&F in replacement of double flanged Non return valve of size 100 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete. Make- (Kirloskar/ upadhayay/ GDPA/BIR)

S&F in replacement of Air release valve of size 150mm double flanged including taking down old unserviceable complete all as specified and directed. Make Kirlosker/Upadhaya/BIR)

Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

S&F water pressure meter (measuring in Bar/psi) with necessary cutting, fitting and fixtures and excavation as required, testing and commissioning, complete all as specfied and directed.

Taking proper shut down in writing disconnecting all the electrical connections, dismantling the unserviceable motor any type centrifugal motor with pump from the base plate and pump and shifting the same to approved workshop for repair/rewinding and replacement of brunt spare parts and reassembling the motor including transportation back the same after rewinding and reassembling, for size of electric motor 60 HP to 1 HP from Jhajjar Nallah /filtration plant complete all as specified and directed by Engr -in- Charge.

Note :- (a) Rewinding of motor will be measured and paid separately under relevent item. (b) The motor shall be squirrel cage induction/slipring induction motor. (c) The contractor shall reinstall the motor within one week after handing over for repairs failing which a penalty @ Rs. 1000/- per day of delay will be charged from the contractor. (d) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of motor duly functional and testing at its original location/position complete all as specified and directed. (e) Replacement of unserviceable bearings and greasing them completely. Bearing shall shall be measured and paid separately. (f) Motor shall be dismantled at workshop in presence of JE concern and inspected by the Engineer -in-Charge. A repair note shall be prepared by the contractor which shall be signed by contractor, JE, EIC and counter signed by GE. Winding cut shall be made in presence of EIC.

Removal of winding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity 60 HP from Jhajjar Nallah complete all as specified and directed by Engr-in-Charge.

Removal of winding the motor rotor with super enamelled copper winding wire/strip as per existing size and truns etc including all the insulating materials i.e varnish, cotton tape insulating paper and soldering etc of motor capacity upt 10 HP complete all as specified and directed by Engr-in-Charge.

M&L copper for Rewinding the motor stator with super enamelled copper winding wire of existing size and gauge and truns etc including all the insulating materials i.e varnish with suppr high quality of cotton tape, insulating paper and other misc items of motor any capacity all as specified and directed by Engr-in-Charge.

M & L for cleaning of tank complete with drain out muddy water from tank and removing all other foreign material like sill, sludge, slit etc and depositing where directed and cleaning of tank by scrapping internally wall surfaces of water tank using wire brush and blades complete and including two coats of white wash using lime to cleaned surface of tank, cleaning of drain trench and removal of small grass and shrubs in the vicinity of tank all as directed by Engr-in-charge.

(a) 2.0 lakh ltr capacity main distribution underground sump at filter plant.

(b) 10000 liters capacity raw water tank at Jhajjar Nalla

(b) 50000 liters capacity raw water pre sedimentation tank at Filteration plant

( c) 50000 liters capacity Sedimentation tank at filter plant.

(d) Filter Beds at filter plant

Material and labour for writing SM/MES no/Location etc on Pump and Motor Set, Generator, Header,and Date of cleaning on tank complete all as directed by the Engineer-in-Charge

Material and Labour for cleaning of Drain of (Width 0.5 mtr and Depth 0.8 mtr) from Drain Chamber at Booster to Drain Line near Shed complete all as directed by Engineer in Charge.

Supply & connecting PVC flexible suction pipe (Green) 80mm dia heavy duty to existing induction motor including taking down old unserviceable pipe as directed.

Supply & connecting PVC flexible suction pipe (Green) 100mm dia heavy duty to existing induction motor including taking down old unserviceable pipe as directed.

Supply and fix in replacement complete foot valve set including accessories 80mm(3') pn 0.2 made up of cast iron

Supply and fix in replacement complete foot valve set including accessories 100mm(4') pn 0.2 made up of cast iron

Supply & fixing in replacement of old unserv starter by Automatic Star Delta starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button,TP MCB etc suitable for motor pump set of capacity 60 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star / C&S/Bentex/ L&T/BCH or any make as approved by GE

Repair and Maint of Oil immersed star delta starter, decarbonised of all contects, relay,thimbles etc and cleaning, making good, tightning of all cables, wires and other connected items oiling in moving macnisiam etc incl replacement of burnt parts as requirment basis all as specified and directed for 60 HP starter complete all as specified and directed .

Supply & fixing in replacement of old unserv starter by Semi Automatic Oil immersed DOL 3Phase starter consisiting of ,indicator lamp,ON/OFF push button,relay range 13-21Amp also having High quality meteal enclosure provided 100% pure copper contactor suitable for motor pump set of capacity 10 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star / C&S/Bentex/ L&T/BCH or any make as approved by GE

Supply and fix in repairs gland bushing made of stainless steel suitable for 50 to 75 HP pump set, type-centrifugal etc complete all as specified and directed.

Supply and fixing in replacement of sets of bearings for 60 H.P motor of end carriage drive complete all as specified and directed.

All as per item No 40 above but bearing for 5 to 10 HP pump/motor

Supply and fixing Pump seal. Make : Champion.

Supply and fixing bearing sleeves.

Overhauling and repairing and servicing for Impeller of suitable existing size made of brass/CI complete all as specified and directed at site by engr-in-charge.

S&F PVC insulated copper conductor cable, 25 sqmm single core, superior quality suitable from starter to 60 HP Motor of approved make including taking down existing un-serviceable cable all as specified and directed

Supply and fix in replacement of GI Union of size 15 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 20 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 25 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 40 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Union of size 50 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Elbow of size 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 15 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 20 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI Socket of size 25 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 15mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Supply and fix in replacement of GI nipple of size 20mm x 50 mm incl taking down old unsv ,complete all as specified and directed. Make -ISI Marked

Material and labour for Fine Sand Gravel for Filter Bed at Filteration Plant Dhansal complete all as directed by engr-in-charge.

Supply and fix in replacement of GI nipple of size 25mm x 50 mm incl taking down old unsv , complete all as specified and directed. Make -ISI Marked

Material and labour for Brick Work with sub class B Bricks Straight or Curved or plan to any radius in cement mortar (1:4) for construction/ repair of Drain/Gully Trap.complete all as directed by Engineer in Charge.

Repair comprehensive and preventive maintenance of DG set any make of the following capacities which include taking down diesel filter, mobile oil filter, lubricating oil, rubber hose pipe, V belt, oil pipe, diesel pipe, burnt parts etc. and tightening of nuts bolts, washers greasing etc for proper running of DG set of capacity 35 KVA

Ditto all as per item No 62 above but capacity of DG Set 63 KVA. Note for ser No 62 to 63 (i) Supply and fixing spares part shall be measured and paid for separately . (ii) Cost of oiling greasing, tightening of nuts, bolts and minor work extra are included in the unit rate quoted by the contractor. (iii) Maint of diesel generating sets will be carried out and maint record shall be prepared by Contractor and signed by JE E/M, Engineer-in-Charge and Contractor. All maint register will be provided by the Contractor for record purpose. (vi) The taken down spares shall be cleaned and refitted on DG sets if found serviceiable. All other taken down parts/spares shall be replaced and paid for under relevant item of this schedule.

Removal of radiator from engine of any capacity de-scaling and brazing as required for repair of water tank etc. and re-fixing the same properly of capacity 35 KVA to 63 KVA

Material and Labour for repair of coupling joint to engine and generator /alternator

Supply and fixing asbestos rope any dia wrapped over the exhaust pipe complete.including taking down

Repair and overhauling of self starter 12 V/ 24 V of any DG set any capacity.

Rewinding of Armature for self starter of capacity 63 to 35 KVA, 12 Volt complete all specified and directed. .including taking down

Taking out FIP from DG set transportation to authorised service centre for overhauling and re-calibration and re-fixing of DG set including replacement of necessary spare parts such as delivery valves, plungers ‘O’ ring spring,nozzel etc. of capacities DG Set 35 KVA to 63 KVA

Supply and fixing in replacement of battery terminal bolt type suitable for battery 12 volt (150/180Ah) as directed by Engineer-in-Charge.

Supply and fixing battery lead of copper conductor 50 Sqmm single core PVC insulated fitted with lead terminal on one side and other side with brass or lead terminal 1 mtr long as per site required and connection as directed by Engineer-in-Charge.

Supply and fixing AVR (Automatic Voltage Regulator) for DG Set of capacity upto 35 KVA to 63 KVA

Material and Labour for repair of turbo charger for 63 KVA capacity.

Supply and replacement of coolant for radiator of any make any type of DG set at various locations.

Material and Labour for servicing and overhauling and repairing complete alternator greasing cleaning of all stator and rotor, re-varnishing the stator and rotor winding with superior quality of varnish including heating and baking the same. Re-assembling the complete alternator, fixing in position and testing on load for 35 KVA to 63 KVA DG Set capacity .

S&F in Replacement of V Belt/Grooved of approved Make for the DG Sets make – DUNLOP, MRF, JK: of capacity DG Set 63 KVA to 35 KVA

S&F in Replacement of Oil pipe complete set of approved Make for the of DG Setsof capacity DG Set 35 KVA to 63 KVA

S&F in Replacement of Oil filter of any size Make- Mico or equivalent. For capacity of DG Set 35 KVA to 63 KVA.

S&F in Replacement of Diesel filter Make- Mico or equivalent.for capcity of DG Set 35 KVA to 63 KVA.

Repair of Water pump assembly for DG Set complete for capacity of DG Set 63 KVA

S&F in Replacement of Ignition switch of 12/24 Volts.

S&F in Replacement of Togger switch of suitable size.

S&F in Replacement of Push Button Starter of 12/24 Volts.

S&F in Replacement of CT 50/5 to 500/5 Make AE

S&F in Replacement of Oil pressure Gauge Make- Yankey or equivalent.

S&F in Replacement of Temperature pressure Gauge Make- Yankey or equivalent.

S&F in Replacement of Solenoid switch 12/24 Volts with relay of suitable capacity. Make- Cumins or equivalent.

Material and labour for replacement of battery 12 volts 180AH maintenance free lead acid including testing complete .

Material and labour for painting of DG Set,canopy and control panel with synthetic enemel paint two coats by spray painting approved colour after scraping of old paint, cleaning of all rusted portion, surface including sign writing i.e MES No, Make, Capacity etc complete all as directed by Engineer-in-Charge for capacity of DG Set 63 KVA to 35 KVA

Supply and Fixing of Full over hauling packing kit suitable for capacity of DG Set 63 KVA to 35KVA

Supply and Fixing of Engine sump packing suitable for capacity of DG Set 63 to 35 KVA

Material and labour for dismantling, opening of diesel engine cylinder head, removal of unservieable worn out spare parts, cleaning of all components, reboring of cylinder on lathe machine, after reboring honning process will be carrred out.replacement of all spare parts and gaskets as per manufacturer spare part kit, re-assembling of coplete engine setting, timing setting for the capacity of 35 KVA to 63 Kva DG set. Note: Spare parts will be measured and paid seperately.

Supply and Fixing of Piston ring set suitable for following capacity of 35 Kva to 63 Kva DG Set per head piston

Supply and Fixing Cylinder liner ‘O’ ring kit suitable for capacity of 35 Kva to 63 Kva DG Set as per make of DG set

Supply and Fixing Main bearing set suitable for capacity of 35 Kva to 63 Kva DG Set as per make of DG set

Supply and Fixing Oil pump set suitable for capacity of 35 Kva to 63 Kva DG Setas per make of DG set

Supply and Fixing Valve suitable for following capacity(inlet and outlet valve) suitable for capacity of 35 Kva to 63 Kva DG Set as per make of DG set

Supply and Fixing Head gasket suitable for capacity of 35 Kva to 63 Kva DG Set

M&L for Filling / topping of new Engine oil SAE-15W-40 or 10W-30 having complete all as specified and directed by the Engineer-in-Charge.

Material and labour for Fine Sand Gravel for Filter Bed at Booster Pump House complete all as directed by engr-in-charge.

S & F in replacement of 100 mm dia bore MS foot valve MS flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

All as peritem No 69 here in before but 80mm bore

Dismantling and Taking out existing unserviceable MS Header and M & L for MS header made out of MS pipe 225 mm dia heavy duty having a length of 5 to 6 mtr inclboth side flanges with 2 Nos flanged tee of size 225x225x80mm, 1Nos flanged tee of size 225x225x100mm ,3 Nos flanged tee of size 225x225x50mm,including necessary welding work for fixing of existing water supply main line of size 50 to 150mm dia distribution lines on either side of the MS header using suitable size MS reducer(As per site requirement) including making good on disturbed surfaces by applying two coats of synthetic enamel paint over a coat of red oxide primer complete as directed by Engineer-in-Charge

S&F of Glow Sign board of following size and showing given name on Acrylic sheet/Fibre glass re-inforced translucent corrugated sheet 2mm thick with MES Logo (symbol) necessary Vinyl Blue Sticker along with 02 No's LED Tube light fitting 20 watts incl nessary connection with 1.5 Sqmm flexible copper wire and fixed on structure with aluminum equal angle as per required size , sufficient Nos brass machine screws with and incl errection complete all as directed.Note:-GI pipe 50 mm bore for errection of glow sign board will be paid separately. GLOW SIGN BOARD SIZE 2.50 m x 0.60m x 0.20m-01 No incl angle iron size 50 x 50 x 6mm length 01 ft –02 Nos grouted in Main entrance Piller with cement plastering or GI Pipe 50mm bore for fixing the glow sign board. MES FILTRATION PLANT DANSAL UNDER GE(ARMY) DHAR ROAD

All as per item No: 72 but size 2.50m x 0.6m x 0.20m-01 No MES POWER HOUSE DANSAL UNDER GE ARMY DHAR ROAD

All as per item No: 72 but size 2.50m x 0.6m x 0.20m-01 No MES PUMP HOUSE DANSAL UNDER GE ARMY DHAR ROAD

Material and labour for writing SM/MES no/Location etc on Pump and Motor Set, Generator, Header,and Date of cleaning on tank complete all as directed by the Engineer-in-Charge

Material and Labour for cleaning of Drain of (Width 0.5 mtr and Depth 0.8 mtr) from Drain Chamber at filtration plant complete all as directed by Engineer in Charge.

Painting of pump motor set, pump any capacity/ any size etc of applying two coat of synthetic enamel paint after rubbing of rusted surface including marking all sign of requisite colour complete all as specified and directed by Engr-in-Charge

Scrapping and Preparation and painting of surface of sluice valve/Air valve/NRV any size 50 mm to 150 mm bore and applying one coat of synthetic enamel paint of black colour complete all as specified and directed by Engr-in-Charge

Supply and fix voltmeter digital type 0- 500 volts including taking down unserviceable volt meter all as directed.

Supply and fix Ammeter digital type 0- 200 Amps with necessary CTs 3 nos of range 100/5 including taking down unserviceable Ammeter all as directed.

All as per item No.83 above but 10 HP pump set complete all as directed and specified.

All as per item No.83 above but 1 to 5 HP pump set complete all as directed and specified.

M & L in replacement of Smart i ipro Metal Water level indicator with alarm on tank full with 5 sensor of size 16x7x5cm , inbuilt mechanism to detect/indicate the water level show the percentage 25%,50%,75% and full of Sump/RCC tank complete all as specified and directed.

Material and Labour of liquid water proofing compound complete all as specified and directed.

Deduct Schedule of Credit of Rs. (-) 46123.00 (Minus) as listed inSchedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

K S BUILDERS (BID ID -3498072)

M/SHansrajbuilder (BID ID -3491655)

DAVINDER SINGH (BID ID -3498575)

MAHADEV ENTERPRISES (BID ID -3498181)