ECHP-II- Dismantling of 350 mtrs. SH Belt at Conveyor-66 and erection of 350 mtrs. SH belt at 1800mm BW, 5Ply, 5 3, 1800 KN N Nylon Nylon for Conveyor-69.

Cutting and removal of conveyor belt to a length 350 mtr, Rolling the released belt, Loading on the Lorry after completion of the work devoluting to Stores.

Drawal and loading of SH Conveyor belt about 350 meters in belt drum from conveyor-66 coal jetty -II to conveyor 69 tail end area transporting and unloading at conveyor - take up area including T&P hire charges and cost of consumables.

Charges for unloading counter weight from counter weight 30-40 ton capacity box arranging chain block and belt clamps, lifting counter weight box to the required level and after completion of belt joint work, releasing the counter weight box loading the counterweight in all conveyors. (For higher counter weight capacity and take-up tower height)

Assembling of 1st belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Assembling of 2nd belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Transporting the belt clamps, chain blocks and special tools and spanners to work Spot and return back after completion of work.

Dismantling the fluid coupling end disc coupling springs by releasing all bolts & nuts in primary and secondary drives including T&P hire charges and cost of consumables.

Uncoiling the 2 drum & belt 350 mtrs and laying the belt about 350meters by using chain block &pull lift arrangements and pulling the belt through wire rope in step by step manner inspecting very wire rope sliding points and conveyor belts for 2000 mm width belt and including T&P hire charges and cost of consumables.

Charges for removing the carrying and return idlers with frames and refixing the same after completion of work and including T&P hire charges and cost of consumables.

Charges for making preliminary arrangements for providing 1st belt joint and assisting the belt joint works and other allied works and including T&P hire charges and cost of consumables.

Making preliminary arrangements for 2nd&3rd&4th belt joint and assisting the belt joint work and other allied works and including T&P hire charges and cost of consumables.

Arresting the belt after laying by using belt arresting clamps at 4 locations and allied Works.

Assembling the fluid coupling disc and cover with coupling springs and tightening all bolts and lubricating the springs and including T&P hire charges and cost of consumables.

Trail running the conveyor on no load and load condition to check the movement of counter weight, belt sway and carrying the belt tracking work including T&P hire charges and cost of consumables.

Charges for providing cold vulcanizing joint in 1800mm width conveyor belt including cost of vulcanizing materials (solution and hardener) hire charges for T&P'S cost of consumables etc complete.

S.S.SOUNDAR ENTERPRISES