DEVELOPMENT OF RESIDENTIAL LAYOUT AT SCHEME NO 61, KANABARGI BELAGAVI

DEVELOPMENT OF RESIDENTIAL LAYOUT AT SCHEME NO 61, KANABARGI BELAGAVI

Clearing and Grubbing Road Land.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ear...

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations comple...

Removal of stumps and roots including backfilling with suitable

material to required compaction

Girth from 300 mm to 600 mm

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position,...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Subgrade and Earthen Shoulders

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting ...

Granular Sub-Base

Plant Mix Method

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to...

Wet Mix Macadam (Plant Mix Method)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in...

Prime Coat over WMM/WBM

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying pr...

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom

Bituminous Macadam Grading - II for traffic 20 MSA

Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading...

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-3...

Dense Graded Bituminous Macadam Grading - II for traffic 20 MSA

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading,...

Bituminous Concrete Grading II for traffic 20 MSA

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premix...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of buildings & bridges and such simillar works in all kinds of soils , as per dr...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Cast in Situ Cement Concrete M20 Kerb

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thi...

Painting Two Coats on New Concrete Surfaces

Painting two coats after filling the surface with synthetic

enamel paint in all shades on new plastered concrete surfaces

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface

Providing and laying of hot applied thermoplastic compound

2.5 mm thick including refle...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total in...

Precast Cement Concrete Interlocking Blocks

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycl...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, r...

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc &...

Providing sand cement bed with 5% cement with all leads for all materials and lifts machine mixed, laid in layers of 15 cms. Thick and well compacted for foundation including curing cost, ...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addition of Formwork (35%) for Drain Including cost and conveyance of all materials, Labour, hire charges of machineries and equipment, lead and lift, loading and unloading charges, transportation and...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 m...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addition of Formwork (35%) for Box Culvert Including cost and conveyance of all materials, Labour, hire charges of machineries and equipment, lead and lift, loading and unloading charges, transportati...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Clearing and Grubbing Road Land.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ear...

Removal of stumps and roots including backfilling with suitable material to required compaction

Girth from 900 mm to 1800 mm

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, ma...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing o...

Providing and constructing 450 mm thick size stone pitching with using 200 to 250mm size stones with pin headers at 2 per m2 using stones and stone chips from approved ...

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification

Providing and laying insitu vibrated M-15grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing and sinking plums of size 150 to 80 mm up...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant)

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slop...

Providing and constructing vertical /inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter criteria in layers of spec...

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Addition of Formwork (8%) for Footing Including cost and conveyance of all materials, Labour, hire charges of machineries and equipment, lead and lift, loading and unloading charges, transportation an...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dire...

Precast Cement Concrete Interlocking Blocks

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycl...

Supplying & spreading Sand / M-Sand including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Two seat swing-2.1 mtr

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Tower slide-2.1 mtr

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Four seater merry go round

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Four seater merry go round

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Double standing twister

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Stainless steel air walker

Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work

Outdoor leg press

Cutting road surface for pipeline trenches and disposing off the excavated stuff with all lead and lift as directed including barricading, danger ighting etc., in the following classifications. Cutti...

Cutting road surface for pipeline trenches and disposing off the excavated stuff with all lead and lift as directed including barricading, danger ighting etc., in the following classifications

Earth work excavation for pipelines trenches in all kind of soil by Mechanical means above 600 mm trench width, as per drawing and technical specifications, including setting out, construction of shor...

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with:

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveyiing to work site, rolling and lowering into trenches, laying true to line, level and perfect ...

Supplying and fixing of DI specials with ISI mark confoming to IS 9523

/ 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with

rust prevention coatings as below:

A) External co...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.90 kg/m2 using mechan...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addition of Formwork, centering Including cost and conveyance of all materials, Labour, hire charges of machineries and equipment, lead and lift, loading and unloading charges, transportation and all ...

Supply, Installation, Commissioning and Testing of GPRS + GSM based EMI flow meters on the Bulk water connections ranging from 100 mm to 300mm. The electromagnetic meters should comprise of the pecif...

Bulkflow meter chamber

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...

Pressure control valve

Construction of Valve chamber (1.5X1.5m)

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with:

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia. with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia. with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...

Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M12x130 hexagon head A2-70 for service connection valves, design der...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ram- ming after watering with a lead upto 50 m , and lift upto 1...

Earth work excavation for Foundation by mechanical means for works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

1.5 to 3.0 Mtrs Depth

Earth work excavation for Foundation by mechanical means for works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ...

Earth work excavation for Foundation by mechanical means for works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...

Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...

Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...

Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...

Labour charges for making flanged joints including cost of jointing ma terials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with a...

Labour charges for making flanged joints including cost of jointing ma terials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with a...

Labour charges for making flanged joints including cost of jointing ma terials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with a...

Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All

Double Socket Duck Foot DI Bends:

Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All

Double Socket Duck Foot DI Bends: - 250mm x 900

Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All

Double Socket Duck Foot DI Bends: - 300mm x 900

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

Supplying & fixing 40 mm dia G.I. medium duty pipes hand railing 3 rows fixed to 1:2:4 (M-150) vibrated R.C.C. post of size 100 x 150 mm at top and 150 x 150 mm at bottom placed at 2 Mtr. intervals fo...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including

applying a primi...

Providing & fixing of Aluminium Ventilators of frame size 40 x 18 mm of 1.3 mm thick, 0.933 Kg/ m all aluminium sections including cutting to required length, joints mitred subdiving the frame tenonne...

Construction of RCC valve chambers of size (1.5x1.5x1.8)

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)

pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...

CM plastering 1:3 up to 10m height

CM plastering 1:3 10m to 13m height

CM plastering 1:3 13m to 16m height

CM plastering 1:3 6m to 19m height

CM plastering 1:3 19m height to 22m height

CM plastering 1:3 22m to 25m height

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

gral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and ...

Gral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and ...

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Refilling the pipe line trenches and foundation with selected available earth from trench excavation and foundation including watering and consolidation in layers of 15 cms thickness including disposi...

Providing PVC-U INDIVIDUAL U.G.D House service connection

(which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the P...

Earthwork excavation for foundations of structures by Mechanical means as per drawing and technical specifications, including setting out, Construction of shoring, strutting, barricading, danger light...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...

Providing and laying cement concrete 1:1.5:3 proportion for foundation (Screed layer) with 20 mm and down size of approved gradation hard broken granite, trap basalt or with any other approved hard a...

Providing and laying vibrated M30 design mix for RCC works with 20mm and down size of approved gradation hard brocken granite, trap, basalt or any other approved hard aggregate, including, cost and co...

Providing and laying vibrated M30 design mix for RCC work with 20 mm and down size of approved gradation hard broken granite, basalt, trap or any other approved hard aggregate including cost and conve...

Supplying and fixing of Stainless steel Manual bar screen size 900 mm x 1600 mm, channel depth 1150 mm, channel width - 1000 mm (approximately), bar size 50 x 10 mm, bar spacing 10 mm, inclination 60 ...

Providing and fixing MS grill work using MS flats or MS square rods or combination of MS flats and square rods as per approved design, drawing including cutting steel sections and welding the same to ...

Providing and fixing of Plastic foot steps

Earthwork excavation for foundations of structures by Mechanical means as per drawing and technical specifications, including setting out, Construction of shoring, strutting, barricading, danger light...

Earthwork excavation for foundations of structures by Mechanical means as per drawing and technical specifications, including setting out, Construction of shoring, strutting, barricading, danger light...

Design, Engineering, Manufacturing, Supply, Supervision of Moving Bed Biofilm Reactor Based STP for

Having Capacity of 1 MLD except civil work.

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

PCC Mix 1:1.5:3 Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position plain cement concrete for levelling course...

Providing and laying in position Reinforced cement concrete M30 Design Mix for flat or sloping floor slabs resting on the ground. The granite/trap basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Reinforced cement concrete M30 Design Mix for vertical side walls, effluent channel baffle walls etc. The granite/trap/basalt crushed graded coarse aggregates and fine...

Providing and laying in position Reinforced cement concrete M30 Design Mix for main and secondary beams below and above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine ...

Providing and laying in position Reinforced cement concrete of M30 Design Mix for top dome. Thegranite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machi...

Supply and Labour charges for fabricating TMT steel bars of all sizes for reinforcement of RCC works including conveying of steel to work site with all lead including cleaning, straightening, cutting...

Supplying and fixing DI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. co...

Supplying, laying of DI flanged pipe true to line / hoisting of CI flanged pipe in position and aligning to correct plumb including cost of jointing material conveying to work spot with all lead and l...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

Construction of RCC valve chamber

Providing and finishing external walls in two coats with water proof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose po...

complete for The excavated trench should be refilled with soft selected earth and the dismantled masonry of the drain should be re-constructed with available size stones in CM 1:8 and providing coping...

complete for The excavated trench should be refilled with soft selected earth and the dismantled masonry of the drain should be re-constructed with available size stones in CM 1:8 and providing coping...

Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...

Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

11kv Class 3X40 Sq.mm XLPE UG Cable

Straight through jointing kits HS Type suitable for 3X400 Sq.mm Cable

Cable termination kit outdoor HS Type suitable for 3X400 Sq.mm

Cable termination kit indoor HS Type suitable for 3X400 Sq.mm

Cable Covering tiles 250X125X40mm or 125X125X40

RCC Hume pipe, 2000mm long, 150mm dia

Collars for RCC Hume pipe

GI pipe, 150mm dia for drain crossing, cable raising

Route & joint indicating stones

Cable trench excavation, 1000x0.6x1=600, Ordinary soil

Laying of Cable Trench

Refilling and consolidation

Making of Straight through joints

Making of cable terminations

Covering the cable with tiles

Spreading sand and forming with sand round the cable

Laying of RCC Hume pipes

Laying of GI pipe

Laying of route & joint indicating stones

Transporting HT cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any).

RMU (5way), One In comer + Three Breakers +one out going (2OD +3 VL), 350 MVA, 630A

Bed conceting with CC 1:2:4 as per labour charges

Construction of Stone masonary was per labour charges item

Supplying of frame of MS channel 100X50mm and MS angle 40X40X5mm welding etc., complete.

Rod type earthing with 40 mm dia 3 mtrs long MS rod as per specification & drawing

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,

Providing chain link fencing 50 mm size of 8 guage complete

Earth Excavation for R.M.U. Foundation depositing of earth on bank up to a lead of 50 mtrs and with a lift up to 1.5 mtrs

Labour charges for Fixing foundation frame of MS channel 100X50mm and MS angle 40X40X5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...

11kV Class 3X95 Sq.mm XLPE Cable

Cable termination kit Out door / In door HS Type for 95 Sq.mm

Straight through Jointing Kit suitable for 95sqmm XLPE UG Cable

GI Pipe, 100 mm dia

Laying of cable in trench

Spun pole 11.0 Mtr Long

Labour charge for Spun pole 11.0 Mtr Long

Single Pole Transformer Structure Kit for 100kVA with transformer seating

Labour charge for Single Pole Transformer Structure Kit for 100kVA with transformer seating

HT Single Top Support with bolts, nuts & washers

HT Single Top Support with bolts, nuts & washers

11kV Pin Insulator with pins

Rabbit ACSR Conductor for jumps

Alkathene Tube 19mm Dia and in coils of 30 Mtrs

Labour charge for Base concreting 1:4:8, 1000x1000x150mm

Labour charge for Pole concreting 1:2:4, 1000x1000x2500 mm

GI Wire 10 SWG

Guy Wire 7/10 SWG

PVC Pipe 160 mm Dia

PVC Pipe 25mm Dia

Earthing materials pipe type for grounding as per

Drawing No. BESCOM/GM/CP/15 & 34/Dt:

Labour charge for Earthing materials pipe type for grounding as per

Drawing No. BESCOM/GM/CP/15 & 34/Dt:

LT Distribution Box for 100kVA with 2Nos of MCCB

Labour charge for LT Distribution Box for 100kVA with 2Nos of MCCB

LT Wiring 100KVA SC * 2

Labour charge for LT Wiring 100KVA SC * 2

11kV Solid Core Type HG Fuse Unit

Labour charge for 11kV Solid Core Type HG Fuse Unit

11kV, 200Amps, Polymer GOS

Labour charge for 11kV, 200Amps, Polymer GOS

LT Distribution Box for 100kVA with 2Nos of MCCB

Labour charge for LT Distribution Box for 100kVA with 2Nos of MCCB

LT Electronic Tri-Vector Meter 5A, Class-

0.5/1.0 accuracy

Labour charge for LT Electronic Tri-Vector Meter 5A, Class-

0.5/1.0 accuracy

11kV Lightning Arester, Metal Oxide, 10kV, 5kA polymer

Labour charge for 11kV Lightning Arester, Metal Oxide, 10kV, 5kA polymer

PVC Insulation Tape in rolls of 10 mtrs

Horizontal Cross Arms

Labour charge for Horizontal Cross Arms

Caution/Danger Board as per Drawing No. BESCOM/GM/CP/40/Dt: 24.10.07

Labour charge for Caution/Danger Board as per Drawing No. BESCOM/GM/CP/40/Dt: 24.10.07

Anti Climbing Device (12mtrs/1Kg GI Barbed

Labour charge for Anti Climbing Device (12mtrs/1Kg GI Barbed

95 Sq.mm, 3.5 core XLPE UG - 1Run

25Sq.mm, 3.5Core for St. lt.

Epoxy Straight through jointing kits suitable for 1.1 kV class LT UG Cables Size upto 185 Sq.mm, 3.5 core

Epoxy Terminating kit (pothead) suitable for 1.1 kV class LT UG Cables 95 Sq.mm, 3.5 core

Collars for RCC Hume pipe

LT Feeder Piller Box with Poreclain Rewireable Cutout and & 2Nos(1for Feeder piller and another for Busbar) of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 8 Way (Dwg No. BES...

Providing Earthing for Feeder Piller Box

Labour Charge for Laying of cable in trench 95Sqmm

Labour Charge for Laying of cable in trench 25Sqmm

Labour Charge for Making of straight through joints

Labour Charge for Making of cable terminations

Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete

Providing Earthing for Feeder Piller Box

Supplying, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying to

work site including loading and unloading at both destinations an...

Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...

Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...

Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...

Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Single Arm Bracket with 1500mm Sta...

Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Double Arm Bracket with 1500mm Sta...

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Providing & Fixing of J bolts, nuts & washers of 16mm Dia 0.8m Long

Providing automatic street light control panel consists of 40 Amps 4 pole MCB 1no, 40 Amps 4 pole power contactor, 2 nos of Push buttons, 40 Amps N power automatic controller with SIM and necessary wi...