Provn of layout and shed, pathway, curtain rods and other sanctioned work at mil stn Abohar.

Amount

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 M and making surface good in any type of soil complete all as specified.

M&L for PCC (1:2:4) type B-2 using 20 mm graded stone aggregate in foundation filling around posts and mass including necessary form work where ever requiredconcrete complete all as specified and as directed.

S&F steel work in tubular and hollow square section trusses and poles including special shaped washer etc. complete using ERW or induction butt welded tubes.

S&F mild steel purlins, crane gantries, rails and heavy and heaving bracket framing (beam, tee, angle, channel, hollow square or flat sections) including distance pieces, cleats etc

S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts or screws.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L preparing new steel surfaces and applying two coat synthetic enamel paint over including a coat of red oxide primer complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil.

Returning filling in including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified.

Removing excavated material n exc. 50 m and depositing where directed.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L sand filling under floors including watering and consolidation complete all as specified & directed.

M&F 60 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) M-35 grade as deign and pattern approved by GE as in path way / hard standing complete all as specified & directed.

M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and as directed by Engineer-in-Charge

M&L for PCC 1:4:8 type D2 (40mm graded aggregate in foundation filling and mass concrete) complete all as specified and directed.

M&L Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4

M&L Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like complete all as specified & as directed.

Formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified & as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for rendering 15mm thick in CM (1 : 4) mixed with water proofing coumpound @ 3% by the weight of cement on brick work or concrete surfaces finished even & fair complete all as specified & as directed. Note:- Water proofing coumpound will be measured saperately.

Supply only Integral waterproofing compound.

S&F glazed ceramic coloured tiles 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in colour cement on vertical surfaces such as in dado/skirting etc over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and as directed

M&L for 16-18mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,including moulding at free ends complete all as specified and as directed

M&L for 25 mm thick PCC 1 : 2 : 4 type B-0 (Using 12.50mm graded stone aggregate) as in floor as setting coarse complete all as specified & as directed.

M & L for 18-20 mm thick Machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing complete all as specified and directed.

M & L for 18-20 mm thick Machine cut kota stone on vertical surfaces such as in dado/skirting etc over and including 15mm thick rendering in CM 1:4 and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection.

M&L preparing newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of water based exterior emulsion over and including a coat of primer as Approved by GE complete all as specified & as directed.

S&F factory made precast PCC solid block (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kerb stones of size 300mmx150mmx300mm machine made set in cement and sand mortar (1:4) complete

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S& F curtain rod 25 mm dia MS pipe with ivory coloured PVC coated, wall thicknes of pipe not less than 20 guage, including fancy type brackets and pair of decorated end knobs (finials), stop roller etc. as per site requirement, fixed to wall with fixing accessories, including taking down old existing curtain rods any description and making good with cement base putty and finsih the surface OBD of complete all as specified and directed by Engineer - in - Charge.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/ceiling surface and its accessories including PVC rigid concealed conduit heavy duty suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated Hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified for (a) One light point/Fan point/Exhaust/bell point controlled by one way switch

(b) One 5 pin socket out let 5 amps on the same board with other switches

(c) One 5 pin, 5A switch socket outlet point on independent board

S & F ceiling fan BLDC (brushless direct current) Motor Ceiling fan 1200 mm sweep 5 star rating with blades,down rods and electronic regulator with all accessories of single phase 240 volts, 210 CFM with service value 6.00 BEE single phase, 50Hz. 230 volts, white color and taking down duly old unserviceable BER fan and deposited to the MES yard complete all as specified and directed Make:Havells/Crompton/Khaitan/CG/Luminous/Orient Note : 1 prepare the list of fixed ceiling fan compiling with Fan Ser No, MES No and a proper location 2. Provide 2 years Warranty on Motor and 3 year on PCB duly obtain from OEM. 3. Provide An Under taking certificate on OEM issued warranty certificate

supply and fixing in replacement of LED complete fitting including batten, T8 retro LED polycarbonate 1 x 20 Watt, appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accesssories and following specifications, including taking down old unserviceable light fitting any type complete all as specified and directed by Engr-In-charge:- Crompton Cat Pt No. LDSLRP20-CDL or equavalent of make: Havells/Philips

Supply and fixing LED bulb 1x9 Watt lamp having luminous efficancy, BEE rated LED Lamps and warranty 2 year all as per specified

Supply and fix PVC Batten/Angle Lamp holder polycarbonate type with back plate suitable for LED blub up to 9 watt complete all as specified

S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified

M&L ceiling rose surface type, 65mm x 50mm three terminals, 3 phase / PVC / polycarbonate isolated body all as specified

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified

S & F in sheet metal enclosures for DBs double door type when MCBs to be used single pole & nuteral 4 ways s all as specified and directed by Engg-in-Charge.

M&L for PCC preparation including cutting up to 45 cm width and depth of the road/hard standing and making good disturbed surfaces by using PCC type C2(1:3:6) by using 40mm graded stone aggregate for the fixing the pipe/laying cables complete all as specified.

M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal GL connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers and earth strip protected by 15 mm dia GI pipe medium grade and connected to main distribution board panel/earthing test point all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on completion including taking down old Unserviceable earthing any type all as specified

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified.

Boring of holes under road, pavement, hard standing by trenchless technology usingn ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure

S&F un-reinforced precast concrete cable cover class LV, type I, flat, size 250 mm x 150 mmx40mm laid flat length of cover across the length of cable a complete all as specified and directed by Engr-In-Charge.

A R CONSTRUCTION COMPANY

M/s Verma Construction Company

PUNEET ENTERPRISES

LM CONSTRUCTIONS