REPAIR TO STEEL FURNITURE ITEMS INCLUDING PAINTING AT AFS BEGUMPET AND CAW AREA UNDER GE (AF) HAKIMPET

Amount

Removing Existing un serviceable locks of Almirah large /Medium/ Locker 6 units Supply & Fixing of New MS Locks of size 65mm 6 levers of approved make Sheel with duplicate Keys all at site as Specification shown in drawing & as directed by Eng- in- Charge. FD-67,FD-1031,FD-1032, FD-243,FD-127(M)

Removing Existing Broken Handles of Almirah large /Medium /Locker 6 units Supply & Fixing of New MS Chromium Plated Handel of approved make all at site as per Specification shown in drawing & as approved by Eng- in- Charge. FD-67,FD-1031,FD-1032, FD-243,FD-127(M)

All as per item No. 2.00 above but for Book Case Steel/ Lockers/ Almirah Map steel FD-90(M),FD-1028,FD-1030,FD-1029

Removing the Existing un serviceable Three way Locking device for Almirah and Supply & Fixing New Three way Locking device made out of 100mm dia mild steel rod & 10 gauges MS Sheet for Almirah Steel. All at site as per Specification shown in drawing & all as directed by Eng- in- Charge.

Almirah Steel Large FD-67,FD-1031

Almirah Steel Medium FD-67, FD-1032

The following Repairs to be carried out in respect of Almirah Large /Medium all at site as shown in drawing as directed by Eng-in- Charge.Denting of bends of doors & shelf’s and re fixing properly with Hinges by welding Cracks and Joints and screwing with Machine screws as required, the welding should be smooth and fine finishing applying putty on dented portions and welded parts finishing with the abrasive paper and applying one coat of red Oxide primer to make good to the dented portion in original shape as directed by Eng-in- Charge. FD-67,FD-1031,FD-1032,

Removing the rusted & broken legs of following items & supply and Fix New legs with 18 Gauge MS sheet including welding & finishing the surfaces & also applying a coat of red Oxide primer as Specification shown on drawing all at site as directed by Engineer- in Charge. For following articles.

Almirah Steel large FD-67,FD-1031,

Almirah Steel Medium FD-67,FD-243,FD-1032

Locker Steel / Book Case Steel/Locker flying kiit steel FD-1029,FD-1028,FD-90(M),FD-127(M),AFA-158

Removing the rusted & broken shelves of following items & supply and Fix New shelves with 18 Gauge MS sheet including welding & finishing the surfaces & also applying a coat of red Oxide primer as Specification shown on drawing all at site as directed by Eng -in -charge

Almirah Steel Large FD-67,FD-1031,

Almirah Steel Medium FD-67,FD-1032

Locker Steel FD-1029,FD-127(M)

Book Case Steel FD-1028,FD-90(M),FD-69(M)

S& F irons clips for shelves FD-1031,FD1032

Material and labour preparation of steel surfaces by removing the uneven surfaces and then applying one coat of synthetic enamel Paint to steel surface on both internal & external sides all as directed by Engineer-in-Charge for following Items.

Almirah Steel Large FD-67,FD-1031

Almirah Steel Medium FD-67,FD-1032 FD-243

Almirah large steel ½ h x ½ sh FD-114/1033, FD/E6/MAP/18

Book Case Steel FD90/1028

Book shelf open Small Steel FD-69(M)

Locker Flying Kit steel AFA-156

Locker Steel FD-1029

Locker Steel 6Units FD-127(M)

Almirah small Steel ½ h x ½ sh FD-114(M)

Table Office Clerk steel FD84(M),1004

Table Office Officer steel FD84(M)(1003

Table 900x900x 760mm steel FD-1008

Table 3’x2’ (900x600x760mm) FD-1009

Rack side steel FD-97(M)

Rack 6 Tier 1905x540x915 FD-1038

Table 1520x 860x 760mm FD-289,1010

M& L preparation of surface and applying one coat synthetic enamel Olive Green Paint Over a finished even steel surface on external sides following furniture items, all as directed by Engineer-in-Charge.

Chair CB Steel tubular Arms FD-75(M)

Chair CB Steel tubular without Arms FD-75(M)

Chair CBA steel with Hand rest FD-120(M)

Chair CB Steel tubular with Arms w/ writing Pad & Bottom rack FD-75(M)

Provision and assembling of broken / dislocated parts of following complete furniture items by welding with 6mm steel rod & 6mm flat plate / 25mm pipe, after welding parts to be smooth finished by grinding for obtaining a smooth finished surfaces as directed by Eng- in- Charge.Note;- (Re-fixing the seat & back/ table tops with Machine Screws/ wooden Screws after repair.)

Chair CB Steel tubular with Arms /CBB Steel FD-75(M)

Teapoy Verandah FD-19/383

Table Steel Office Clerk FD-84(M)

Table Steel Office Officer. FD-84(M)

Chair CBA steel with Hand rest FD-120(M)

Chair Verandah FD-256

Removing of the u/s seat frame of CBA Steel / CBB / CBA Writing pad and Modification/ Spl with Hand rest steel Chairs, Supply & Fix New I st class teak wood seat frame with making holes should be 12.5 mm centre to centre all around the frame with duly caned with 2.00mmx 0.46mm Cane as shown in drawing including iron strip duly welded and as directed by Eng-in- Charge. Make;Mar Cane / Maharastra Plastic Industries FD-75(M) FD-120(m) GE/AF/HAK GE/AF/SEC/11/84

Seat Frame

Back Frame

Removing broken arms rest Supply and fix New Ist class TW Arms rest with proper wooden screws for Chairs CBA/ CBB CBA Writing pad and Modification/ Spl with Hand rest steel Chairs all as directed by Engineer –in- Charge FD-75(M) FD-120(m) GE/AF/HAK GE/AF/SEC/11/84

Removing of existing unserviceable locks of Book Case/Table drawers and supply and fix with a new 40 mm brass 4 levers locking arrangement with Duplicate Keys, as shown in drawing and All at site as directed by Eng- in- Charge. FD90,FD-84(M)FD-1003,FD-1004

Removing of existing unserviceable Table drawers and replace with new drawers(Set of three) with locking system made out of 1 mm thick sheet as per particular specification as shown in drawing and All at site as directed by Eng- in- Charge.

Table Office Clerk Steel FD-84(M)FD-1004

Table Office Officer Steel FD-84(M)FD-1003

Removing of the Existing U/S Table top and supply and fix with new Table top made out of 18/19mm thick pre laminated particle board with Novapan Exterior grade one side teak face with Wooden Screws and 6mm Ist Class teak wood beading all around as directed by Eng- in- Charge.

Table Office Clerk Steel FD-84(M)FD-1004

Table Office Officer Steel FD-84(M)FD-1003

Teapoy verandah with white colour Prelaminated FD-255

Table 900x900x 760mm steel FD-1009

Table 3'x2' (900x600x760mm) with drawer FD-1008

Table 3'x2' (900x600x760mm) without drawer FD-1007

Table 1520x860x760mm steel FD-1010

M&L re-canning of Chair Varandah in mat pattern as shown in drawing after removing old cane including cleaning of surfaces of chair with abrasive paper and applying one coat of synthetic enamel paint co lour white /pale cream including provision of new PVC hard rubber shoes . cane plastic shall be size of 4.0mmx0.6mm super fine quality co lour white . FD-256

Removing of Unserviceable cane plastic and Material & re canning Following Chairs with Godrej Pattern as per particular Specification Shown on drawing and as directed by Engineer-in-Charge. on in drawing with cane plastic size 2.00mmx0.46mm and beading with 4.0x0.6mm cane plastic super fine quality co lour white including removing of old cane. Make of cane shall be ;- Maharastra plastic Industries / Mar cane

Chair CBA Steel/ CBB FD-75(M)

Supply & Fixing of New PVC Shoes Square/ Round Type for all types of Steel Tables/ Chairs Including Varandah Chairs(MAP Drg ) in lieu of broken shoes in steel tables as directed by E-in- Charge. FD-84(M), FD78(M), FD-1003,FD-1004

Removing broken Glass Door shutter of book case steel & replace with New 4mm thick plain glass Make:- Modi / Atul/ Saint Globin as shown in drawing and as directed by Engineer –in- Charge. FD-90, FD1028,

Provision and application of one coat synthetic enamel Olive Green Paint Over a finished even steel surface on external sides following furniture items, all as directed by Engineer-in-Charge.

Rack steel 6 Tier Adjustable 1905 x450 x915mm FD-1038

Rack steel 3 Tier Adjustable FD-1039

Rack Adj Steel 1875 x900x510mm TP

Removing of Unserviceable parts of chair Revolving high back / Medium back chair Computer as under, and S&F new parts as per existing size/ Model with necessary reparing material required on site such as pvc beading, locking/lifting keys, pvc cover, welding of MS cracks & painting etc including Re-assembling/ tightening of loose joints and cleaning of chair after repaired for suitable use.

Base with Five Prong & wheels TP

Castor Wheels TP

Hydraulic gas lift system with Cover (complete device with Key) TP

PVC cover for back Tiltting Rod TP

Tapestry Cloth /Rexine of seat & Back TP

Handles TP

Synthetic foam of seat & Back TP

Hard board of seat & Back TP

Material and Labour providing MS flat 3mmthick 50mmx35mm size duly holed two Nos for fixing the screws to the chair and properly welded to the chair frame for seat and back portions all as directed by Engineer-in- Charge. FD-75(M) FD-120(m) GE/AF/HAK GE/AF/SEC/11/84

Charpoy GI Pipe with 12mm plywood top FD-220

S& F flat MS iron 40mmx6mm thick,900 mm long providing holes/ drilled in each flat iron for tightening plywood on flat iron along with long rail with counter sunk screws/sutiable MS nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coat of synthetic enamel paint over a coat of red oxide primer Complete all as directed by the Engineer in charge. Note: one number of MS flat Iron strip 40mmx6mmx900mm long is measured as one unit.

S & F 12mm thick plywood BWR grade with teak wood beading alround the ply size as per Charpoy ( As per drawing FD-220) duly tightening with flat iron 02 Nos and iron strips of the charpoy with 08 Nos and with long rails after making holes/drilled in long rail with counter sunk screws/suitable MS nuts, bolts, with washer complet where ever required and as directed by the Engineer in charge. Make : Kitply /Unik/ Swastik

GI 3 way elbow 32mm dia (ISI Marked)

GI Check nut 6mm thick 32mm dia

CHAIR VERANDAH OFFICER'S & JCO's FD/MAP-II/06, FD/E6/MAP-II/15

M& L for removing broken and U/s PVC Seat and Supply & Fix new PVC seat and back of size 455mmx 455mm of 4mm thick with weight not less than 1.85 Kg and grooves 90x10mm, 10Nos all as shown on drawings.

M& L for removing broken and U/s PVC Back a d Supply & Fix new PVC seat and back of size 455mmx 455mm of 4mm thick with weight not less than 1.85 Kg and grooves 90x10mm, 10Nos all as shown on drawings.

Removing of Unserviceable parts of chair padded with arms steel cushion and S&F new parts as per existing size/ Model with necessary painnting & reparing material required on site. FD-75(M)

Synthetic foam of seat & Back

Tapestry Cloth /Rexine of seat & Back

Handles

VISHWAS ENTERPRISES

M/S DIVIJA BUILDERS

A.K. MARKETING ASSOCIATES

BALAJISTEELINDUSTRIES

Mahesh Traders