REPAIR/MAINT TO SANITARY FITTINGS, FLOORING, PLINTH PROTECTION AND CONNECTED ITEMS UNDER AGE B/R-I OF GE JAIPUR

Amount

S&F in repair 15 mm bore Bib taps, Fancy type, chromium plated, cast copper alloy with capasten head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15 mm bore CP Angle valve, cast copper alloy screwed down high pressure with capastan head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends, fancy type chromium plated with long shank and cup (concealed type) complete all as specified and directed

S & F as in repair 40mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed

S & F in repair 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair PVC connections 450mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete all as specified and directed

S & F in repair PVC connections 300mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete all as specified and directed

S & F in repair PVC connections 600mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete

S & F in repair 15 mm bore CP, cast copper alloy, pillar cock swan neck screwed for iron pipe, complete all as specified and directed.

S & F in repair 160mm bore PVC soil, waste and rainwater (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary mild steel flat iron clamps at joints for fixing with wall complete incl taking down old unserviceable pipes

S & F for PVC (SWR) Bends 110mm bore, with oval access doors complete all as specified and directed.

S & F for PVC branch piece 110mm bore, single (single Y) equal or unequal with oval access doors complete all as specified and directed.

S&F in repair Vitreous China wash hand basin, white, Vienne oval type of size 510 x 450mm, Including brackets , coupling and waste pipe complete all as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repair, Complete all as specified and directed

S & F in repair vitreous china bowl urinal flat back, snow white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete,

S & F in repair vitreous china wash basin, white flat back size 500 x 400x130 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F in repair viterous China table top wash hand basin white size 160mm x 495mm x 365mm complete all as specified & directed.

S&F in repair viterous china extended wall hung WC white bowl size 775mmx360mmx660mm including dual flush fitting and cisturn and including soft close seat cover complete all as specified & directed.

S&F in repair vitreous china one piece closet with interated cistern, seat cover and twin flush fitting EWC S or P trap white bowl size 700mm x370mm x650 mm complete all as specified and directed. Make : Prayag Cat No 4120 or equivalent as approved by GE.

S&F in repair Corner Glass shelf 300 mm with brass brackets complete all as specified and directed.

S & F in repair 15 mm dia two way Bib taps fancy type cromium plated long body cast copper alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule with brass brackets complete all as specified and directed.

S & F in repair EWC seat cover of coloured match to WC complete all as specified & directed.

S&F as in repair sensor soap dispenser complete all as specified and directed. Make Prayag cat pat No BSS-15 or equivalent as approved by GE.

S&F as in repair sensor Hand dryer machine complete all as specified and directed. Make : Prayag cat pat No BSD-18 or equivalent as approved by GE.

S&F in repair Toilet paper roll holder with flap Vitreous china with CP brass screw complete all as specified and directed.

S&F as in repair bottle trap of PTMT 32mm bore with 300mm long wall connection pipes with minimum weight 32 mm- 260 gms complete all as specified and directed.

S& F in repair vitreous china urinal with sensor and urinal connector for urinal with size 690 x 330 x 290 mm complete all as specified and directed.

S& F in repair Urinal sensor for urinal with size 690 x 330 x 290 (as per existing) mm complete all as specified and directed.

S&F in repair vitreous China urinals, half stall long body type of size 345x320x560mm (back or corner wall type) complete including urinal spray, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Make : Prayag Cat part No 4998 or equivalent as approved by GE.

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete

M&L Securing glass of any description in existing wooden/aluminum frame glazed with putty / beads including removing loose or decayed putty/beads, rebeading /reputting and painting to match existing work complete all as specified and directed.

Supply & Fix SGG Sparkling ice ST-167 toughened glass (for window up to height of 20 m) complete all as specified and directed.

Supply & Fix froasted glass 12mm thick for windows and urinal partition complete all as specified and directed.

S&F 12mm thick toughened coloured glass including all type carving lining work as in window, Partition wall & others (size not exceeding 4 Sqm Each) including all fittings etc& required to fix the toughened glass etc complete all as specified and directed.

S&F 6mm thick laminated toughened glass for structural glazing complete all as specified and directed.

S&F as in repair Chromium plated jet spray suitable for EWC, complete all as specified

S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed, aluminium body.

S & F as in repair 150mm long extruded Brass handles,fabricated type polished complete all as specified and directed.

S & F as in repair 200mm long extruded Brass handles,fabricated type polished complete all as specified and directed.

S & F as in repair 150mm long Brass barrel of extruded section tower bolt with cast or sheet barrel and rolled or cast bolt and fixed complete all as specified and directed.

S & F as in repair 200mm long Brass barrel of extruded section tower bolt with cast or sheet barrel and rolled or cast bolt and fixed complete all as specified and directed.

S&F as in repairs 300mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F as in repair extruded aluminium alloy handles, fabricated type., anodised,150 mm long complete all as specified and directed.

S&F in repair 75mm long aluminium door stoppers with two rubber shoes complete all as specified and directed.

S&F in repair 75mm long brass door stoppers with two rubber shoes complete all as specified and directed.

S&F as in repair aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

S&F as in repair butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised size 100mm long ISI marked type B21 complete all as specified and directed.

S&F as in repair Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F hasp and staple, safty type, aluminium anodised with mS hinge pin including bolt to hinge plate and fixed with screws conforming to IS -363,size 100mm complete all as specified and directed.

S & F 30mm thick continuous (piano) hinges mild steel, bright finish or electroglavanised, complete all as specified and directed.

M&L in repair 16-18 mm thick, MDF Board both side laminated using in cupboards, Drawers etc as per standard trade practise complete all as specified and directed.

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed

M&L in repair for wooden floor at Squash Court as follows complete all as specified and directed by Engineer -In-Charge:- Wooden floor - Prestige USA - (WSF Approved) Maple wood - for flooring of squash courts. (1) Cushion Pads - 8 mm thick cushion pads placed under the wooden sleepers for extra resilience (2) Pine / Fire wood sleepers - 63 mm wide x 32 mm thick x 100 mm + planks, chemically treated or termits installed 450 mm centre to centre. (3) 12 mm Plywood (4) Flooring - Maple, 20 x 57/83 mm, Tongue & Groove, kiln dried and treated for termites. (5) The maple flooring will be finished with anti skid polyurethane finish.

All as per item 54 above but the following work only :- (1) Flooring - Maple, 20 x 57/83 mm, Tongue & Groove, kiln dried and treated for termites. (2) The maple flooring will be finished with anti skid polyurethane finish.

M&L two coat french polishing on surface of any description width incl cleaning and preparining the surface incl a coat of wood filler on new works complete all as specified and directed by Engineer-in-Charge.

Dismentling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridge complete all as specified and directed by Engineer-in-Charge.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified.

Providing and fixing in repair suspended false ceiling extra microperforation size of 600 x 600 x 12 mm Ceiling Tiles over and including suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) including necessary hanging system arrangement which is required to be made from existing rafter and purlins of trussed roof of building all as directed by Engineer-in-Charge. Make : SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete or equivalent brand of make as approved by GE.

Providing and fixing in repair suspended false ceiling Panels extra microperforation size of 600 x 600 x 12 mm. Make : Armstong ORCAL or equivalent as approved by GE

M&L for Opening of old false ceiling any type and refixing the same after changing of hanging wire.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified

S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Dismentaling of floor hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed

M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M & L glazed coloured joint free ceramic tiles 300x600x7 to 8 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S&F GI tubing medium grade with all fitting 40 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

S & F as in repairs stainless steel grating doom100 mm dia complete all as specified and directed

S&F Looking mirror 6mm thick bevelled edge , size 0.75mm x 1.80M fitted with distance pieces (4 Nos) of stainless steel including making holes in mirror, fixing arrangement as directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I, complete all as specified and directed

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I, complete all as specified and directed

S & F 2000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old existing tank complete all as specified in SSR Part I,

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and directed

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed

M&L for Granite (of any tpe), 16 to 18mm mm work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M&L rounding to edges of granite stone one edge, such as in steps, cooking platform, and other similar situations complete including polishing complete all as specified and directed

M&L preparing old decorated surface of ceiling and applying two coat of oil boud distemper (Oil emulsion) of approved tint complete all as specified and directed

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper (Oil emulsion) of approved tint all as directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge.

M&L 100 mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) finished even and smooth without using extra cement in floor and pavings complete all as specified and as directed

M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L rendering 15mm thick on fair faces of brick work in CM 1:4 using water proofing compound @2% by weight of cement or as per manufacture instruction and finishing even and smooth without using extra cement all as specified.

M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint on walls complete all as specified and as directed

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints hacking for key scrubbing with water complete all as specified and directed

M&L rendering 15mm thick on other than fair faces of stone /brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparing new plastered surfaces and applying two coats of oil bound distemper over priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application over a coat of bituminious primer confirming to [email protected] Kg per Sqm including taking down old treatment on surface and cleaning down complte all as directed.

S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges godrej patern locking arrangement incl 12 mm dia verticak rod incl spray painting in factory in wood finish pattern or as directed.

Taking down door chowkaht or frame (without taking off shutters from the frame.) of any description area n exc 1.50 Sqm each complete all as specified and directed.

S&F anodised aluminium frame of Powder Coating for grill, doors, windows, ventilators with one or more rebates including jointing cleat for fixing (minimum thickness of powder coating 50 micron) etc complete all as specified.

S&F anodised aluminium Powder Coating door shutters, aluminium section weighing 0.55 kg/m and above including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

M&L taking down Aluminium door & refixing the same after necessary adjustments and repair including providing necessary beading complete all as specified and directed

S & F PVC Vanishing blinds of any size and any type (Horizontal/ vertical/roller/Zebra type) Blinds complete all as specified and directed by Engr-in-Charge

S & F in repair stainless steel H-Type Door Pull Handle of size (32 x 450 x 600) mm fixed to wooden doors with all fixing nails/screws etc.

S & F in repair stainless steel H-Type Door Pull Handle of size (32 x 300x 450) mm fixed to wooden doors with all fixing nails/screws etc.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M & L glazed coloured joint free ceramic mozaic tiles 300x300x7 to 8 mm thick, on horizontal/ surface as floor /vertical surfaces of of swimming pool etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat on surfaces other than fair faces of brick work in CM 1:4 complete.

M&L for fixing in repair 1st class hardwood door shutter of 30 mm shutter thickness, Plain, framed moulded on each side, panelled shutters (any number of panels), of with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers of supplied and fitted to chowkats as specified and directed.

S & F stainless steel magnetic cabinet door catcher moulded in PVC frame of size 15x12x2.5 mm to hold cabinet door, furniture door of approved make complete all as specified & directed

M&L for marble crazy over 20 mm thick screed in CM 1:4 shall be laid over surface obtained after fine sand dusting.When the cement is still green, 18 -20 mm thick marble crazy pieces shall be spread in regular panel using dividers of marble strips 18-20 mm thick and 50 mm wide the size of panels shall be 1.0 to 1.5 m in length and breadth spread over the entire roof area so that 80-85% area of roof is covered by these pieces leaving joints 10 to 15 mm vide the spaces for joints shall be filled with cement sands and marble aggregate of 4 to 7 mm size like in "cast in situ terrazo topping" the work of placing curing and grinding shall be done all as per clause 13.38.4 to 13.38.6 of SSR Part-I in repair incl taking down old treatment .

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

S.R.Enterprises

M/S MAYANK ASSOCIATE

ANKIT BUILDERS

J.J.ENGINEERING