Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹9.6 LAccepted-Finance | 1st | Accepted-Finance 1st height | |
| 2 | 2nd₹12.4 L+₹2.8 L (29.3%)Accepted-Finance | 2nd | Accepted-Finance 2nd higest | |
| 3 | 3rd₹13.6 L+₹4.0 L (41.2%)Accepted-Finance | 3rd | Accepted-Finance 3rd higest |
Tender Value
₹12.7 L
EMD Value
₹25,500
Closing Date
4 Nov 2020, 4:00 pmClosed
EXECUTIVE ENGINEER EDIV KHANYAR
OFFICE OF THE EXECUTIVE ENGINEER EDIV
Replacement of old rotten wooden poles and stranded /undersize conductor for Feeder No 6 of Khanyar Receiving Station feeder within the jurisdiction of sub Division Khanyar
2020_PDD_105315_1
EDIV 26
Open Tender
Electrical and Maintenance Works
Turn-key
21 days
KHANYAR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
EXECUTIVE ENGINEER EDIV KHANYAR
₹25,500
Yes
23 Dec 2020
26 Sept 2020
5 Nov 2020
28 Sept 2020
4 Nov 2020
29 Sept 2020
29 Sept 2020 - 29 Sept 2020
Supply, installation, testing and commissioning of:
9 mts steel tubular pole post 410 (SP-33) IS 2713 (part-II) 1990 as per REC Standard. Poles to be provided by the department which is to be lifted from Divisional stores at Khanyar
8 mts steel tubular pole post 410 (SP-15) IS 2713 (part-II) 1990 as per REC Standard. Poles to be provided by the department which is to be lifted from Divisional stores at Khanyar
100 mm ²ACSR Conductor(dog) IS 4826/1979 ( to be laid as per REC standard) (Conductor to be provided by the department which is to be lifted from Divisional stores at Khanyar)
MS Channel iron(ISLC 75 designation) 75x40x40x6 mm 6' long (40No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard .
MS Angle iron braces (ISA 5050 designation) 50x50x6mm 6' long (40No) duly fabricated as per site requirement and painted with two coats of Red oxide and Al. Paint as per REC Standard
11KV pinwith insulators Brown glazed porcelain insulator confirming to IS-731/1971 Amendments 1 to 5 type B with 320mm minimum creepage distance and with lead/Zinc thimbles suitable for use with G.I forged pin having small steel heads as per IS-4l86 (P.I) 1993 and IS-2486 (P.II)1989 and revision with latest amendments if any as per REC Standard C-1
Danger plate as per REC Standard
Anticlimbing Device as per REC Standard
Galvanized Nuts & Bolts & washers of sorts. (Galavinsied as per IS-2633/1986)
Earthing as per REC Standard (J-2) (Rod Type) for 9 mtr pole
Earthing as per REC Standard (J-1) (Spiral Type) for 8 mtr
LT Shackles Insulators brown glazed 90X75MM along with mukki clamps clamp
Dismentalling of old wornout poles and carriage of same to the Divisional stores
Dismentalling of barbed wire/starnded/undersize conductor and carriage of same to the Divisional stores
Pole clamps
Cement bottoming of pole structures as per REC Standard
Painting of poles/ structure with 2 coats of Al. & red oxide paint and painted of orange colour as per REC Standard
WULAR INFRASTRUCTURE PVT LTD
waseem rifat
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .