Karnataka

Active

Works

Irrigation and Other Works

Modernization of Distributaries and Pickup Canals of Cauvery Branch Canal, Keragodu Branch Canal, Shimsha Branch Canal and New Maddur Branch Canal under Mandya Constituency

Cauvery Neeravari Nigam Limited

CNNL VC Div Mandya | Mysore, Karnataka

Amount: ₹84.7 CrCloses: 19 Jun 2026

Tender Value

₹84.7 Cr

EMD Value

₹84.7 L

Closing Date

19 Jun 2026, 10:00 pm

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Modernization of Distributaries and Pickup Canals of Cauvery Branch Canal, Keragodu Branch Canal, Shimsha Branch Canal and New Maddur Branch Canal under Mandya Constituency

Tender Information

Tender ID

302338

Reference Number

CNNL/2026-27/IW/WORK_INDENT5051

Tender Type

Open

Product Category

Irrigation and Other Works

Location

CNNL VC Div Mandya

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredBidder should be registered Civil Contractor of CPWD/ KPWD Class I registered contractor.

RequiredAudited balance sheets & Turnover certificate with UDIN number for the preceding 5 years 2021-22 to 2025-26 should be duly certified by CA

RequiredWork done certificates for similar nature of work

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit in required format

RequiredCertificates to demonstrate owning/hiring equipments

RequiredB.E.civil or equivalent graduate engineer with degree certificate

RequiredBid capacity calculation and details of work on hands

RequiredIncome tax returns for the year 2021-22 to 2025-26 and GST Registration certificate

Eligibility Criteria

Tendering by the joint venture will be Acceptable.

The intending bidder should furnish the copy of the certificate of registration issued by state/ central Govt.

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The TENDER PROCEESING FEE will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The requisite Earnest Money Deposit (EMD) Through ONLINE only with validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected.Under this section of qualifying criteria the tenderer should furnish capacity details/ format.

Earnest money Deposit(EMD) can also be submitted As per circular No.FD5Expenditure-12/2023 Dt:10.02.2023, in the form e-Bank Guarantee

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in Karnataka Public Procurement Portal within 3 days of opening of technical Bid.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, No.1 V.C. Division, Mandya during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday/Declared holiday, the next working day will hold good for the respective events.

The intending contractors should note that, if any of the lands (either in part/parts or in whole) required for the work is not yet acquired by the Nigama, it shall be the responsibility of the contractor to take possession of such land by consent of the owners before commencement of work at no extra cost to the Nigama and no claims whatsoever relating to non-availability of land would be entertained.

Defect liability period is THREE YEARS from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The Tenderer should furnish the Name of the individual / firm/ Company/Joint Venture with address and telephone number with place of registration, year of incorporation etc.

The application made by the firm / company/Joint Venture shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted.

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document.

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company should furnish list of man power available with him for taking up above work.

The intending Bidder/firm/company/Joint Venture shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2021-22 to 2025-26)

The intending Bidder/ firm/ company shall provide the audited balance sheets or other financial statement acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished.

Employees Provident fund Registration Certificate (a) In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, CNNL No. 1 V C Division Mandya, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF. (b) However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The intending bidders are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders.

Royalty Recovery from the contractors bill will be made as per Government Circular CI 81/MMN 2014 Bangalore Dt: 05-03-2014 & Circular from the office of Director Mines & Geology Department Dt: 13-03-2014 & Circular from the office of Director Mines & Geology Department Dt: 06-09-2018 further any Orders/Circulars issued Government of Karnataka from time to time

The rates quoted by the contractor must be inclusive of all Taxes, etc.,(excluding GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Applicable GST will be paid separately as per the prevailing Govt Orders from time to time

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height.

If CNNL wishes to engage third party consultants / PMC for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Performance security:Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any forms given below for an amount equivalent to 5.00% of the contract price plus additional security for unbalanced tenders (If quoted below) in accordance with the clause 25.5 of ITT and cluse 43 of the conditions of the contract. Cash/ Bankers cheque/ Demand draft/ Payorder/ Bank Guarantee in favour of Executive Engineer, CNNL, No.1 VC Division, Mandya, Payable at Maddur or specified small saving instruments pledged to CNNL, No.1 VC Division, Mandya.

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess: The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No:LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate/ Item rate.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work.

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Subleasing/subcontracting are liable for rejection.

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand,as an alternative the use of manufactured sand (M-sand)confirming to relevant IS specifications may be allowedduring the remodeling work

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge .All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule-B includes all lead and Liftsirrespective of the distance and height,no extra claim will be entertained for additional lead and lifts.

The contractor should have capacity of deploying centralized batching plant along with The transit mixture during execution of concrete works for both structures and lining.

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled on Risk & Cost basis & his EMD will be forfeited.

Related to qualification condition No :2, Idle charges for men & machineries for non-progress period delayed due to any reasons attributed to the contractor will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons

Typo graphical errors if any will not be the ground for any claims by the contractor

If the rate (s) quoted by tenderer for any item (s) of work is/are below the estimated rates of the department then the contractor shall furnish an addtitional performance security for an amount equivalent to the difference between the cost as per quoted and the the estimated rates.In case of contractor quoting rate above 125% of the estimated rates,then the amount over and above 125% will be withheld during the progress of work. Additional performance security & fixed secured deposit as per KW rules should be given at the time of execution of the agreement.

Tenders from Joint ventures are acceptable. The number of members in a Joint Venture would be limited to 3(three). To be eligible to participate in the tender process, the Tenderer may be a single business entity (Business Entity) ie, Individual/Partnership Firm/ Company/ Public Sector Undertaking should be registered class-I Civil Contractor in KPWD/CPWD having suitable Technical, Financial and Managerial Capabilities are eligible to participate. (Documentary proof shall be uploaded).

Joint venture:Tendering by a joint venture of Contractors is permissible subject to following conditions (a) If the Applicant comprises a number of firms combining their resources in a joint venture, the legal entity constituting the joint venture and the individual partners in the joint venture shall be registered and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GoK. (b) The Lead Partner shall have minimum 51percent Financial Annual Turnover criteria and the other Members should have achieved at least 25percent of prescribed annual turnover (qualification criteria), in any of the 2 financial years during the last 5 years (i.e., 2021-22 to 2025-26). (c)In case of Joint Venture, the eligibility criteria will be considered on the basis of combined resources. The individual firms, agencies, and joint ventures who meet the above eligibility requirements are here referred to as Each Bidder / Firm/ Company /Joint Venture. However, JV members shall nominate the partner who meets the qualification criteria under a and b above as Lead Member of the JV (d) The joint venture must satisfy collectively the Qualification criteria. For this purpose the following data of member of the joint venture may be Jointly and collectively to meet the qualifying criteria:(i) Annual turnover (sub clause 3.2 a) (ii) Similar nature of work and Quantities executed (sub clause 3.2 b & c) (iii) Financial means (sub clause 3.3 b & 3.6) (iv) Personnel capabilities (sub clause 3.3 c). (v) Equipment capabilities (sub clause 3.3a).

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

In accordance with the above, the Application shall include all related information required for individual partners in the joint venture. (e) Joint venture is allowed as per item No.2.3 above. (f)One of the partners, who is responsible for performing a key function in contract management or is executing a major component of the proposed contract, shall be nominated as being in charge during the tendering periods and, in the event of a successful tender, during contract execution. The partner in charge shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the joint venture this authorization shall be evidenced by submitting a power of attorney signed by legally authorized signatories of all the partners (g)All partners of the joint venture shall be legally liable, jointly and severally, during the tendering process and for the execution of the contract in accordance with the contract terms, and a statement to this effect shall be included in the authorization mentioned under Sub-Clause 2.3(f) above. To enable the above, each of the partners of the joint venture shall meet not less than 25percent of the qualifying criteria specified for Average annual turnover and Line of credit / liquid assets. All members of the joint venture must have experience in execution of similar works. (h) A copy of the Joint Venture Agreement (JVA) entered into by the partners shall be submitted with the Application Pursuant to Sub clause 2.3(f) to 2.3(g) above, the JVA shall include among other things: the JVs objectives the proposed management structure the contribution of each partner to the joint venture operations the commitment of the partners to joint and several liability for due performance recourse/sanctions within the JV in the event of default or withdrawal of any partner and arrangements for providing the required indemnities. (i) All the member should submit Audited Profit and Loss account statement certified by a practicing Chartered Accountant bearing the UDI (Unique Document Identification) number along with copy of income Tax returns filed for the years indicated above should be furnished. Charted Accountants certificate without UDI (Unique Document Identification) number will not be considered. (j)The qualification of a joint venture does not necessarily qualify any of its partners to tender individually or as a partner in any other joint venture or association. In case of dissolution of a joint venture prior to the submission of tenders, any of the constituent firms may qualify if they meet all of the qualification requirements, subject to the return approval of the employer. Individual members of a dissolved joint venture may participate as subcontractor to qualified applicants, subject to the provisions mentioned below: No firm can be a subcontractor while submitting a tender individually or as a partner of a joint venture in the same tendering process. A firm, if acting in the capacity of subcontractor in any tender, may participate in more than one tender, but only in that capacity. A tenderer who submits, or participates in, more than one tender will cause all the proposals in which the tender has participated to be disqualified (k) The lead partner shall execute the contract with employer on behalf of JV with respect of the works if awarded to such JV. All the correspondence shall be issued in the name of Lead partner. All payments shall be made to lead partner and statutory deductions shall also made in the name of lead partner

Technical Criteria

Past Experience

The intending bidder/firm/company should have satisfactorily completed 90% of work individually executed at least one similar work of Improvements/ Construction/Modernization of canal & road of value not less than 50% of the amount put to tender (i.e. not less than Rs:4234.00 Lakhs) during the last five financial years from 2021-22 to 2025-26. Note-The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer, & should be countersigned by the Superintending Engineer or equivalent rank officer, ( The cost of completed works of previous years will be given a weightage of 10% per year based to bring them to 2026-27 level rupee price value).

Work Done Certificate

The intending bidder/ firm/ company should have executed in any one financial year the following minimum quantities of work in the last five years satisfactorily.(2021-22 to 2025-26) (1) Earth work Excavation in all kinds of soil classification/ Embankment-123100.00 Cum (2)Cement Concrete of all grade-25900.00 Cum (3) Reinforcement steel-1300.00 Tonne (4) WBM/WMM/GSB- 17700.00 Cum

Work Done Certificate

Capabilities of Vendor

Each Tenderer should further demonstrate (a) Availability by owning the following key and critical equipment for this work: The intending bidder/firm/company should furnish details of ownership of Machineries/Equipments etc., to an extent of more than 50% of the requirement and also should furnish copies of lease agreement of hiring of Machineries/Equipments etc., to be deployed for this work. (1) Batching plant of min. 30cum/hr capcity-01No (01 own) (2) Transit Mixers -04Nos (02 own, 02 Lease/Hire/own) (3) Self-loading concrete mixer of 2/4 cum capacity 04Nos (02own, 02 Lease/Hire/Own) (4) Excavator-04 Nos (02 own, 02 Lease/Hire/Own) (5) Tippers 10 wheelers-08 Nos (04 own, 04 Lease/Hire/Own) (6) Vibratory Roller 8/10 Tonne capacity-4 Nos (2 own, 2 Lease/Hire/Own) (7) Truck mounted Water Tankers min 5000 litres-08 Nos (4 own, 4 Lease/Hire/Own) (8) Needle/Plate vibrators-08 Nos (4 own, 4 Lease/Hire/Own)

Others -- Machineries

List of key technical personnel required for the work is as under (1) Project Manager-BE Civil with Minimum of 15 years experience & should have been project Manager for at least one Project/work of size similar to the present contact-1 No (2) Civil Engineer-BE Civil with Minimum 5 Years experience-1 No (3) Diploma in Civil Engineering with Minimum 5 Years experience-1 No

Others -- Technical persons

Bidder should be registered Civil Contractor of CPWD/ KPWD Class I registered contractor.

PWD Registration Certificate (Class I/II/III/IV)

Assessed available tender capacity(AxNx1.5-B) where,A-mimimum value of civil engineering works executed in anyone year during the last five years(updates to 2026-27 price level) taking into account the completed as well as works in progress B-value at 2026-27 price level of existing commitments and on-going works to be complete during the next 18 months(period of complition of the works for which tenders are invited) N-number of years prescribed for completion of the works for which tenders are invited 18/12 -01 year 6 month note-the statements showing the value of existing commitments and on going works as well as the stipulated period of completion remainig for each of the works listed should be countersigned by the employer in charge, not below the rank of an executive engineer/equivalent

Others -- Tender Capacity Calculation with existing commitments details

Financial Status

To qualify for award of this contract, each tenderer in his name should have in the last five financial years i.e from 2021-22 to 2025-26 achieved in at least two financial years a minimum financial turnover of value not less than the two times estimated annual payment under this contract i.e. Rs: 11300.00 Lakhs. Note: 1. Turnover certificate duly certified by chartered accountant shall be uploaded financial turnover of previous years will be given a weightage of 10% per year to bring them to 2026-2027 level rupee price value.

Audited CA Certificate of Annual Turnover

The intending bidder / firm/ company shall furnish details of liquid assets / availability of credit facilities of not less than the equivalent of the estimated cash flow for 3 months in the peak Construction period amounting to Rs.1420.00 Lakhs for meeting the required funds in the form of credit lines / letter of credit/ certificate from any Nationalized Banks/ Scheduled commercial Banks. In prescribed format.

Line of Credit

The Tenderer should furnish a copy of the Income Tax Return for the preceeding five financial year (2021-22 to 2025-26).

ITR Filed Copy (Mentioning PAN)

The Tenderer should furnish a valid copy of GST Registration Certificate along with updated GST clearance copies

GST Registration

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹84.7 L

Important Dates

Last Activity

5 Jun 2026

Published

5 Jun 2026

Bid Opening

20 Jun 2026

Download Ends

19 Jun 2026

Pre-Bid Meeting

10 Jun 2026

BOQ Preview

•

Modernization of Distributaries and Pickup Canals of Cauvery Branch Canal, Keragodu Branch Canal, Shimsha Branch Canal and New Maddur Branch Canal under Mandya Constituency

•

Clearing and grubbing road land including up rooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable...

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/formation of Embankment or as directed including cost of all machine...

•

Earth work excavation by Mechanical means in all kinds of soils Depth upto 3 m for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Excavation for vertical / inclined shaft in all types of soft / hard rock including cost of all materials, machinery, labour, ventilation, lighting, drainage, scaling excavated surface, removing and h...

•

Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations. Complete with all lead and lift as...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/t...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Providing and laying insitu vibrated M-15grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing and sinking plums of size 150 to 80 mm upto 15 percent for piers/ ...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Complete with all lead and lift as per the ...

•

Providing and laying 100 mm thick in-situ M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cy...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) 250 mm Dia pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying ...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) 300 mm Dia pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying ...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) 500 mm Dia pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying ...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) 900 mm Dia pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying ...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) 1200 mm Dia pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying...

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. Complete with all...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mech...

•

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2on the prepared bituminous surface cleaned with mechanical broom .Ref to MORT...

•

Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported t...

•

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...

•

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. Complete with all lead and lift as per the direction ...

•

Reinforced cement concrete M15 grade 200 meter Stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. Complete with all lead and lift as per the direction ...

•

Providing impervious embankment adjacent to masonry / concrete structure and filling trial pits using impervious approved soil from borrow area in layers of 100 to 150 mm ( before compaction ) includi...

•

Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate ( with top seal ) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, ...

•

Providing new embankment to slopes of the existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer manually to meet require...

•

Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not les...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones of 600 x 200 x 100 mm size for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engine...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. Complete with...

•

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two coats on new work over an under coat of suitable shade with ordinary paint ...

•

Royal Granite Bench : Supplying and fixing Garden sofa bench specification 72 inch length, leg height 18 inch, back rest 26 inch, and hand rest 17 inch using sadarahalli white granite/suitable granite...

•

Supply, erection, testing and commisioning of Solar lights ,120 W PV, 45 Ah battery, 36 W ledlight fitting with 6 mts of MS pole. Including Civil work. Complete with all lead and lift as per the direc...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm,...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm. Complete with all lead and lift as per ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Red Soil Filling : Supplying and filling good quality red earth on graded surface upto a depth of 150 mm for the top layer for lawn and planting area, including leveling, Tinal contouring. Complete wi...

•

clearing of land by cutting of thick and sparse growth plants 0.25 mt thickness plants and clearing of bushes along with roots throwing away to 1.5mtr height and 50 mtr far. Complete with all lead and...

•

Digging pits size 0.75m x 0.75m x 0.75 filling up to 50% the pits with top excavated soil and remaining 50% with sand, Fym, Red earth (0,021 Cum) (i.e. in the proportion of 1:2:3) and planting of Howe...

•

Digging pits size 0.75m x 0.75m x 0.75 filling up to 50% the pits with top excavated soil and remaining 50% with sand, Fym. Red earth (0,021 Cum) (i.e. in the proportion of 1:2:3) and planting of Cary...

•

Developing flower beds by digging to 0.45 m filling of the area with the excavated top solid remaining 50% with sand (0.375 Cum), red earh (0.112 Cum) i.e. in the proportion of 1:2:3 and planting with...

•

Digging pits of size 0.45x0.45x0.45 filling up to 50% of the pits with top excavated soil and remaining 50% with the mixture of sand (0.007Cum) FYM (0.014), Red earth (0.021Cum) (i.e. in the proportio...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and...

•

Providing and constructing 300mm thick dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

3rd notification 2026-27.pdf

Others - Tender Noification • 1.38 MB

Modernization of mandya -Bid Document -final.doc

Tender Document • 4.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Modernization of Distributaries and Pickup Canals of Cauvery Branch Canal, Keragodu Branch Canal, Shimsha Branch Canal and New Maddur Branch Canal under Mandya Constituency

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?