REPAIR/ MAINT OF FENCING, FOOTPATH, ROOFING, FLOORING, CEILINGAND ALLIED INFRA WITHIN UNIT AT OAF UNDER GE 970 EWS

Amount

Dismanting post or struts (wood,steel or RCC) any section,including taking out embedded portion in natural ground and making good the disturbed ground complete all as specified and as directed

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers not exceeding 25cm, watering, & removing surplus soil to a distance not exceeding 50m & making good surface in soft/loose soil, complete all as specified and directed.

M&L PCC 1:3:6, type-C2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Dismantling fencing wire mesh not exceeding 4kg, any type and in any position & separating them the serviceable & unserviceable materials and removing the unserviceable wire mesh from work site all as directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and type to any type of standard rails, straining bolts etc including provision of binding wire complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165, complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm long dia of shank 11 to 15 mm, complete all as specified and directed.

M&L mild steel round bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new steel surface, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description n.exc 10 cm width or grith,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. .

M&L for rendering 15 mm thick, cement plaster in cement mortar (1:4) mixed with liquid water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surface, finishing the surface even & smooth without using extra cement complete all as specified and directed. NOTE:- Liquid water proofing comound shall be measured & paid separately

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for applying two coats of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approved by GE) over and including a coat of suitable primer on newly plastered surface of wall including preparation of surface complete all as directed at site.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as directed.

M & L for 75 mm thick plain cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:4), complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

M&L Machine pressed precast, cement concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and as directed. Note : Supplying and spreading of sand cushioning shall be measured and paid separately

M&L Precast factory made kerb stone any size and any shape made from cement concrete type B0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in copings, kneelers, apex stones, bed plates, slightly rounded for chamfered angles and throating etc, complete all as specified and as directed.

M&L PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in CM including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles, complete all as specified and directed.

M&L for Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M & L for Brickwork with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls, complete as specified and directed.

M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in level course of flooring, complete all as specified and directed.

M&L non skid/ anti skid ceramic tiles coloured pattern as required of not less than 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over 15mm thick screed bed in CM (1:6) compete all as specified and directed.

M&L non skid/ anti skid ceramic tiles coloured pattern as required of not less than 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over 15mm thick screed bed in CM (1:6) compete all as specified and directed.

M&L non skid/ anti skid ceramic tiles coloured pattern as required of not less than 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over15mm thick screed bed in CM (1:6) compete all as specified and directed.

Description all as per item No. 28 above but on skirting over with and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Description all as per item No. 29 above but on skirting over with and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Description all as per item No. 30 above but on skirting over with and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

M&L vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including dismantling of tiles and laid over 15mm thick screed bed in CM 1:6 compete all as specified and directed.

-ditto- all as per item No. 34 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in mass concrete and sub base complete all as specified and directed.

M&L 60 mm thick glossy finish interlocking tile of M-30 mix laid over dry sand cushioning,filling of joints with sand & compaction after filling of joints and edges shall be secured with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), complete all as specified and as directed. NOTE : Supplying and spreading for sand cushioning shall be measured and paid separately.

Dismantling structural steel work including doors, gates but excluding framed trusses etc, complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.

S&F 0.63 galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.

Preparing new zinc (or galvanised) and steel surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. iron surfaces as in roofings exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flashing of required machine moulded shape and size, complete all as specified and directed.

Anodized aluminium snap grid frame work for false ceiling, size of grid 605mm 605 , runners of size 15x32mm with hangers of 6mm dia GI (upto 1200mm length) adjusting level, fixed to roof by means of ceiling cleats made out of GI flat 40x3mm size 60mmlong and expansion hold fasteners 12.5mm dia 40mm long including 6mm thick non asbestos fibre cement building board of size 610x610x6mm instead to GI/ Aluminium frame work with screws, including taking down existing ceiling board & grid work etc of any type/ pattern etc, complete all as specified and directed.

M&L for 5mm thick plain of required texture and coloured PVC sheet in strips and channel feather at the edges for fixing on solid PVC wall lining insulated PVC wall lining and solied PVC partition, inclusive of solvent cement and fixing at site including necessary framing and beading and including dismantling wall and ceiling boards of any description, complete all as specified and directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

S&F aluminium door single shutter of aluminium section weighing 0.55 kg/m consisting of frame and shutter as per specification given below with aluminium beading and rubber gasket of suitable size including fixing of 02 Nos Aluminium handle 230mm size, 01 No Hydraulic floor spring and 2 Nos Aluminium tower bolt of size 200mm, one brass lock with two keys fixed with rawl plug complete including necessary joining cleats, glazing clips rubber packing, snap beading and other builder hardware as required all as specified and directed.

Notes :- An amount of Rs. 74,580.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S GHULAM HASSAN KUCHAY (BID ID -3228111)

M/S TARIQ AHMAD SHEIKH (BID ID -3225683)

M/S MEGA BUILDERS (BID ID -3228360)

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS (BID ID -3224410)

M/S M AAZAM CONSTFRUCTIONS (BID ID -3228433)

M/S BASHIR AND SONS (BID ID -3226701)

M/s A B CONSTRUCTION (BID ID -3228323)

M/S Manzoor and Co (BID ID -3228067)

M/S JAN BUILDERS (BID ID -3225475)

rafiq trading co (BID ID -3226634)