Supply of Machinery, PVC Pipe and Sprinklers for various parks at Andrews Ganj Ward No. 145, Central Zone

Hedge Trimmer Engine: 2- Stroke - Single Cylinder Air cooled. ENGINE DISPLACEMENT: Should be between 20-25 CC Power Output: Should be minimunm 1 HP FUEL TANK CAPACITY: Minimum 400 ml WEIGHT: Should not be more than 6.0 KG CLUTCH: Clutch Linning should be metal only. HANDLE: Must have Rotating multi-function handle ANTI VIBRATION SYSTEM: Must have spring loaded technology for Anti Vibration System Design: Should have Double sided blade with tooth spacing minimum 35mm Bar Length: Minimum 600 mm Blade: Should have Chrome Plated -Anti Corrsion. Stroke Rate ( l/min): Minimum 3000 Vibration Level m/s2 at Right Handle: Should not be more than 3.5 m/s2. Sound pressure level (dB..(A)): Should not be more than 95 Certification: Should have TUV with EN ISO 10517:2009

Brush Cutter Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compensator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton

Operated Chain Saw Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/s Certification: Product should have valid DPLF certificate with test standard EN ISO 11681.

Petrol Operated Pole Pruner Engine : Single Cylinder, 2 Stroke, Air cooled Only Displacement: Should be between 25-30 CC POWER OUTPUT : Should be minimum 1.2 HP Weight (Dry without cutting attachment & fuel ): Should not be more than 7.5 Kg Fuel tank capacity (ml): Should be minimum 400ml Chain oil capcity (ml): Must have minimum 200 ml. Clutch : Clutch shoe linining should be metal only. Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only . Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pitch should be 1/4" OR 3/8Picco only and drive link thickness must have 1.1 mm or 1,3 mm. Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket. Equipment total Length with guide bar and chain ( cm ) : Should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A) Vibration Measurement m/s2 at control handle - Extended Poistion : Should not be more than 5.5 m/s2 Certification : Must have TUV certification with test standard EN ISO 11680.

Pole Pruner Supply of Telescopic Pole Pruner:- Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment : 10 positions Locking Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max

Lawn Mower Supply of Lawn Mower:- Specification:- Type of Machine Walk behind Lawn Mowers Power Source Petrol Engine Start Type Recoil / Pull Start Speed control Variable Speed Drive Type All Wheel Drive Blade style Rotary Type Blade Engagement Electromagnetic Cut Width (mm) 500 to 524 Minimum Cut Height 1 millimeter Maximum Cut Height 26 millimeter Blades Metallic Number of Blades 1 Number of positions for cut - height adjustment 2 Number of levers for Cut - height adjustment Single lever Number of Wheels 4 Front Wheel Size 200 millimeter Rear Wheel Size 200 millimeter Wheel Tyres Pneumatic If yes, Grass Catcher / Collector / Bag Volume 88 liter "Engine Power Rating (Watt)" 4000 to 4999 Engine Fuel Tank Capacity - 1 Ltr.

PVC Pipe Supply PVC Pipe MADE OF Nylon with Braiding, Inner Diameter 30 mm, Length of Coil 30 Mtr. & Wall Thickness 3 mm up of 1st grade PVC (As per Sample)

Rain gun Staineds Rain gun staineds: Anastain Jaguar water gun-alluminium alloy body and ARM, gun matel hex nutt and inlet jeckt and plactic nozal.

Tryport Stand Tryport Stand: 1-1/2” rain gun stained: 1-1/2” with GI riser 1-1/2” x 4 fit.

Sri Sai Enterprises (BID ID -943250)