CLEANING OF SEWAGE DISPOSAL SYSTEM, MANHOLE COVER, SWT REPAIR, REPAIR OF DRAIN COVER, STP AND OTHER CONNECTED WORKS AT VSV, TECH AREA AND MES COLONY AND REPAIR AND MAINTENANCE OF VARIOUS QTRS OF VSV AND MES COLONY AT AF STN TKD UNDER GE (AF) TKD

Amount

Rough excavation in soft/loose soil not exceeding 1.5 m deep and getting out complete all as specified and directed by Engr-in-charge.

Removing spoils/debris outside MD land exc 5 Km and depositing and spreading, removal of spoil include for loading into and unloading from barrows, carts, baskets, etc., or mechanical transport vehicles complete all as specified and directed by Engr-in-charge.

Cleaning of blocked CI, SGSW pipe of 100 mm bore from gully trap/WC to first manhole by rodding/choke remover manually as in foul condition after taking off the manhole cover and placing the manhole cover (Old) in position including sealing around manhole cover where required complete all as specified and directed by Engr-in-charge. Note: The complaint has to be rectified within 08 hrs as given in complaint register, failing which penalty will be imposed @ Rs.100/- per complaint per day.

Cleaning of sewage lines of size 150mm dia and over including man holes through chassis mounted Diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with international standard pumps having 3000 ltrs suction capacity operating by skilled operator with supervisor cum engineer for cleaning/ partial desilting of manholes and sewer lines as per guide lines laid in IS-11972 (1987) and complete cleaning of site complete all as specified and directed by Engr-in-charge. Note:- Jetting of the sewer line shall be carried out by high pressure system of w2200 PSI/Suction. The work shall be carried out as and when required basis for required lengths at various locations.

Demolition of brickwork built in cement mortar complete all as specified and directed by Engr-in-charge. Note: Demolished material to be removed outside MD land.

M&L for brick work with subclass 'B' Bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering in cement mortar (1:4) to brick/concrete wall surfaces finished even & smooth (without using extra cement) with water proofing compound at the rate of 3% by weight of cement or as per the manufacturer’s instructions complete all as specified and directed by Engr-in-charge. Note: WPC shall be measured and paid for separately

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. Note: Demolished material to be removed outside MD land

M&L for providing plain cement concrete (1:4:8) type D-2 by using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for dewatering/de-sledging/pumping out of of liquid or semi liquid or any kind of fluid/foul water/waste/foul water from inspection chamber/pits/ manholes/soakage well/sumps/ excavated area by water sucking hydraulic pressure machine or pumping out to alternate manholes/distance as required on ground including cleaning of all sludge silt residue of both organic & inorganic nature by mechanical scrappers etc in any position & in order to facilitate working/progress of works as per prevailing rules of local authorities to the entire satisfaction of Engr-in-charge. Note: (i) The quoted rates shall be included for hydraulic pressure machine/pump as well as excavation of pits/sumps wherever necessary for this item. (ii) All necessary safety precautions to be adhered during working as per the prevailing local authorities rules.

M&L for 150 mm RCC drain pipes, NP2 laid in trenches and jointed including demolition & breaking up of 150 mm bore drain pipes (salt glazed ware, AC or reinforced pipes) set in cement mortar and providing plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150 mm bore including packing under & haunching against the sides of pipe after they are laid and tested including necessary excavation, RFR & earth work upto 3m depth in any type of soil, removal of demolished materials outside of MD land etc complete all as specified and directed by Engr-in-charge.

M&L for 200 mm RCC drain pipes, NP2 laid in trenches and jointed including demolition & breaking up of 200 mm bore drain pipes (salt glazed ware, AC or reinforced pipes) set in cement mortar and providing plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 200 mm bore including packing under & haunching against the sides of pipe after they are laid and tested including necessary excavation, RFR & earth work upto 3m depth in any type of soil, removal of demolished materials outside of MD land etc complete all as specified and directed by Engr-in-charge.

M&L for 300 mm RCC drain pipes, NP2 laid in trenches and jointed including demolition & breaking up of 200 mm bore drain pipes (salt glazed ware, AC or reinforced pipes) set in cement mortar and providing plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 200 mm bore including packing under & haunching against the sides of pipe after they are laid and tested including necessary excavation, RFR & earth work upto 4.5m depth in any type of soil, removal of demolished materials outside of MD land etc complete all as specified and directed by Engr-in-charge.

S&F in repair 100mm dia cast iron soil waste pipe in any length with or without ears with cement joints laid in trenches or in floors incl necessary earth work complete all as specified and directed by Engr-in-charge.

S&F in repair 100mm dia cast iron soil waste pipe and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engr-in-charge.

S&F in repair 75mm cast iron soil (sand cast) waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engr-in-charge.

S&F in repair 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-charge.

M&L for providing plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in copings, benching etc. complete all as specified and directed by Engr-in-charge.

M&L for pre cast cover slabs (for man holes etc.) using cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, set in CM 1:6 with plain faces incl necessary formwork etc complete all as specified and directed by Engr-in-charge.

M&L for TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified and directed by Engr-in-charge.

Removing floor/Nahani trap cover, cleaning the trap by removing greasy substances, sludge etc with or without use of chock remover manually ensuring free flow of waste water, fixing of new PVC trap cover using neat cement paste complete all as specified and directed by Engr-in-charge.

Cleaning of the existing drain pipes of 150mm internal dia up to 1.50 mtr depth by rodding manually as required at site from manhole and well flushing after cleaning including getting out the sludge if any and liquid materials from connecting manholes, deposited in lines including removing the solids and sludge to outside defence land by covered transport and cutting the bushes around the manholes and on the route of the sewer line upto 1 metre width complete all as specified and directed by Engr-in-charge.

All as per item No 23 here-in-before but for 200mm dia and depth from 1.5 to 3.00 mtr depth including cutting bushes around the manholes and on the route of sewer line upto 1 metre width complete all as specified and directed by Engr-in-charge.

S&F in repairs, urinal half stall vitreous china coloured supplied with PTMT integrated spreader for even flow of water, installed with concealed 'Z' brackets, including waste coupling, waste pipe etc complete all as specified and directed by Engr-in-charge.

S&F in repairs, urinal spreader of PTMT of any colour for fixing with 15 mm dia pipe complete all as specified and directed by Engr-in-charge.

Cutting of bushes, weeds, vegetation etc removing all the waste to a distance exceeding 250mtr from storm water drain, oxidator pond, installations etc complete all as specified and directed by Engr-in-charge.

M&L for removing silt/soil, any description from the storm drains of size not exceeding 3 metre depth and 3 metre wide and removing the same to a distance not exceeding 1000 metres and depositing where directed complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick PCC (1:2:4) type B0 by using 12.5 mm graded stone aggregate as in flooring mixed with WPC as recommended by manufacturer including finishing the concrete surface smooth & even using extra cement complete all as specified and directed by Engr-in-charge.

M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.

Demolition of concrete of any description and in any position not otherwise specifically provided for by machine/power hammer complete all as specified and directed by Engr-in-charge. Note:- Demolition material thrown away from the defence land and rate of loading, unloading and transportation cost of demolition material included in above quoted rate.

M&L for 100 mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in sub-base or paving etc complete all as specified and directed by Engr-in-charge.

S&F machine pressed PCC interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment laid dry, complete all as specified and directed by Engr-in-charge.

M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge.

M&L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed screed bed and pointed in neat cement slurry in floors with grey cement and no pigments including 20 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-charge.

Taking down cement or cement lime plaster of any description on bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering with cement mortar (1:4) on concrete or brick surfaces finished even & fair as a whole or in patches complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering with cement mortar (1:6) on concrete or brick surfaces finished even & smooth as a whole or in patches complete all as specified and directed by Engr-in-charge.

M&L for 5mm thick rendering with cement mortar (1:4) for ceiling surface finished even & fair as a whole or in patches complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint over a coat of approved primer complete all as specified and directed by Engr-in-charge.

M&L for preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion over a Coat of chalk whiting primer, complete all as specified and directed by Engr-in-charge. (Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services)

M&L for preparation newly plastered surfaces of ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying three coats of white wash complete all as specified and directed by Engr-in-charge. Note:-work can carried out upto fourth storey/hanger

M&L for 19-20mm granite stone slabs of approved shade, external edges moulded half rounded, bedded in cement screed 15mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the stone including grinding, polishing, dismantling floor and screeding etc complete all as specified and directed by Engr-in-charge.

M&L for ceramic coloured tiles as in floors 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm (400mmx400mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), dismantling floor and screeding etc complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles as in floors 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm (300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), dismantling floor and screeding etc complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic colour tile in area size 450mmx300mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4), dismantling floor and screeding etc complete all as specified and directed by Engr-in-charge.

M&L for servicing/easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting complete all as specified and directed by Engr-in-charge.

Easing of wooden door shutters/Almn door/PVC door shutter/ Almn window (One unit shall comprising of one window/CB/ Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description)from metal frame incl punching or drilling out old glazing pin and providing and fixing new plain or pin headed glass 3mm thick not exc 0.50 Sqm each complete all as specified and directed by Engr-in-charge.

M&L for jointing and testing galvanized iron tube 15 mm dia, medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors including taking down existing tubing etc complete all as specified and directed by Engr-in-charge.

S&F in repairs PTMT bib taps 15 mm dia bore complete all as specified and directed by Engr-in-charge.

S&F in repairs PTMT stop valve 15 mm dia bore with long shank complete all as specified and directed by Engr-in-charge.

S&F in repairs PTMT angle stop valve 15 mm dia bore complete all as specified and directed by Engr-in-charge.

S&F in repairs PTMT shower 15 mm dia bore complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc and removing old IWC outside MD land complete all as specified and directed by Engr-in-charge.

S&F PVC in repairs PVC flushing cistern 10 ltrs capacity, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling, waste pipe and including PTMT pillar tap 15mm, waste fitting and union, removing old WHB outside MD land complete all as specified and directed by Engr-in-charge.

Supply only PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed by Engr-in-charge.

S&F in repairs white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repair framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed blasters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 grade or Fe-310-0 including fixing with fastener bolts/welding as per site requirement complete all as specified and directed by Engr-in-charge.

S&F in repair welded steel wire fabric exc 4Kg per Sqm welded to steel section at any position complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces exc. 10cm in width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mmx160mm, also including waste coupling and waste pipe complete all as specified and directed by Engr-in-charge.

S&F in repair kitchen plate rack of size 600x750 mm made of Stainless Steel 1 mm thick fixed on the wall with brackets complete all as specified and directed by Engr-in-charge.

S&F in repairs aluminium anodised curtain rods 20 mm dia with brackets and end knobs complete all as specified and directed by Engr-in-charge.

S&F in repairs aluminium anodised tubular towel rods 20 mm dia D type 60cm long complete all as specified and directed by Engr-in-charge.

S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing including taking down existing door frame with shutters and as directed by Engr-in-charge.

S&F in repars for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engr-in-charge.

S&F 150 mm size aluminium handles, cast type anodised and fixed complete all as specified and directed by Engr-in-charge.

S&F 150 mm long aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F Aluminium Anodized powder coated aluminium frame for doors, windows, ventilators, portion wall with one or more rebates, any number of tracks including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge. Note: Thickness of powder coating is 50 micron.

Providing and fixing powder coated, window/ventilator with sliding glazed shutter along with stainless wire mesh shutter along with aluminium frame of 1.55mm thick, tinted glass of 5.50mm thick and 7mm thick aluminium anodised grill fixed to frame with locking arrangement, handles fixed complete and finished with metal paste on gap of the surface with nacessary jointing clips, aluminium snap beading, screws, click handle etc complete fixed to frame in contact with brick work and making good disturbed portion of jamb, cill etc all as directed and specified and approved.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks for galvanised wire stapple complete all as specified and directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls all as specified and filling cracks/hole by applying walls and ceiling putty (multipurpose mixer will be used for uniform and proper mixing of putty) and applying two coats of distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary complete all as specified and directed by Engr-in-charge.

M&L for preparation old decorated plastered and unplastered surfaces of ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying one coat of white/colour wash complete all as specified and directed by Engr-in-charge. Note:- Work can carried out upto fourth storey/hanger.

M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

The new hut furnitures (BID ID -3316089)

akenterprises (BID ID -3314734)

M/S S.K.Electricals (BID ID -3314315)

ANAND ENTERPRISES (BID ID -3314870)

Neeraj Enterprises (BID ID -3315153)

M/S DEVRAJ SINGHAL (BID ID -3315946)

Deepak Electricals (BID ID -3315416)