PROVN OF EXTERNAL SERVICES FOR INDUCTION OF SRE AT BIHTA

Amount

Lump Sum price worked out by the contractor for 'BUILDINGS WORKS' as inserted by the MES in Schedule ‘A’ Part I.

Lump sum price worked out by the Contractor for "INTERNAL WATER SUPPLY" as inserted by the MES in Schedule ‘A’ Part II

Lump sum price worked out by the Contractor for "INTERNAL ELECTRIC SUPPLY" as inserted by the MES in Schedule ‘A’ Part III

Lump sum price worked out by the Contractor for "ROAD/PCC PATH" as inserted by the MES in Schedule ‘A’ Part IV

Lump sum price worked out by the Contractor for "EXTERNAL WATER SUPPLY" as inserted by the MES in Schedule ‘A’ Part V

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY” as inserted by the MES in Schedule ‘A’ Part VI

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as inserted by the MES in Schedule ‘A’ Part VII

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as inserted by the MES in Schedule ‘A’ Part VIII.

Lump sum price worked out by the Contractor for “FENCING AND GATE” as inserted by the MES in Schedule ‘A’ Part IX.

Lump sum price worked out by the Contractor for “LIGHTENING PROTECTION” as inserted by the MES in Schedule ‘A’ Part X.

Lump sum price worked out by the Contractor for “REF &AC" as inserted by the MES in Schedule ‘A’ Part XI.

Lump sum price worked out by the Contractor for “SITE CLEARANCE, EXCAVATION AND EARTH WORK" as inserted by the MES in Schedule ‘A’ Part XII.

Lump sum price worked out by the Contractor for Schedule `A' Part-XIII (rate against Srl No. 14.01 to 14.08, 15.01 to 15.03, 16.01 to 16.12, 17.01 to 17.02, and 18.01 shall be quoted by the Contractor)

SCHEDULE A Part III (INTERNAL ELECTRIC SUPPLY)

S&F ceiling fan of 1200mm sweep, 240V AC single phase(5 Star rating), copper winding and connecting up and including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose complete all as specified and as directed.

S&F Exhaust fan of 450mm sweep, 240V AC single phase complete with louvers and shutters of suitable size, copper winding and connecting up and including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose complete all as specified and as directed.

S&F 36 watt LED decorative ultra slim aluminum LED lighting fixture with high lumen output enviromental friendly, energy efficient complete all as specified and as directed.Make: Havells cat part No LHEXACP7IN1W036 or crompton/Philips.

S&F 30 watt LED decorative ultra slim aluminum LED lighting fixture with high lumen output enviromental friendly, energy efficient complete all as specified and as directed.Make: Havells cat part No LHEXACP7IN1W030 or crompton/Philips.

S&F MCB DB TPN 08 ways horizontal double door type powder coated sheet steel enclosure complete all as specified and as directed.

S & F sub main wiring using approved colour coding (Phase-red,Neutral-black,Earth-green) complete with two single core FRLS PVC insulated and unshealthed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6.0 sqmm as earth contunity conductor ,voltage rating 1100 volt ,ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated,unshealthed,stranded copper conductor of size 6 sqmm all as specified and directed . Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

Material & Labour for fixing street light bracket made out of GI pipe light grade 40mm bore approx length not less than 120cm bent to shape without wielding including new clamps made out of MS flat of size 30x5mm thick including cutting, welding, drilling holes, nut bolts, washer, etc including two coats, aluminium paint over one coat of red oxide primer on MS work complete all as directed.

S & F LED Light fitting complete 45 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Light source complete all as specified and as directed. Make - CG Cat Pat No LSTP-45-CDL or HAVELLS/PHILIPS

SCHEDULE A PART V (EXTERNAL WATER SUPPLY)

M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for insertion of GI pipe 50mm dia where directed complete all as specified and as directed. Not less than 5.5 Mtr in length.

S&FGun metal globe or gate valve 80mm dia with forged brass spindle and iron wheel head, screwed both ends internally for iron pipe complete all as specified and as directed.

M&L for construction of brick masonry valve pit of size 900mm x 900mm x 900mm (internal diameters on chamber) complete with 100mm thick PCC 1:3:6 type C-2 in base, 100mm thick PCC 1:2:4 type B-1 in floor, 230mm thick brick work using sub class well burnt class 'B' brick in CM 1:4, 10mm thick internal rendering in CM 1:4 and frame of angle iron 30x30x4mm embeded in 100mm thick PCC 1:2:4 with 3.15mm thick MS sheet cover with locking arrangement including 6 lever pad lock and applying two coats of systhetic enamel paint over a coat of red oxide primer on metal surface including excavation in any type of soil, returning filling and removal or surplus soil complete all as specified and as directed.

SCHEDULE A PART VI (EXTERNAL ELECTRIC SUPPLY)

Supply and fix Indoor/Outdoor type end termination jointing kit suitable for 1.1KV grade cable complete with jointing material heat shrink type and connected accessories suitable for 3 ½ /4 core XLPE, armoured, AI conductor cable of size 25 to 50 Sqmm, complete all as specified and as directed.

Supply, install, testing and commissioning of automatic servo controlled voltage stabilizer 100 KVA conforming to BIS 9815 : part-I 1994 reaffirmed 2009) unbalanced type (Individual phase control), 3 phase, 50 Hz, naturally oil cooled, copper wound, indoor type with digital display, relay free smooth and silent operation including first filling of transformer oil complete. The output voltage range 415+1% (phase to phase), 240 V + 1% (Phase to neutral). The following additional protection may also be provided :- (a) Over load/short circuit protections. (b) High/Low voltage cut off. (c) By pass arrangement in case of emergency. (d) Single phase sequence change protection. (e) Input Voltage 300V-480Volts .

Supply, install, testing and commissioning of 100 KVA Isolation transformer three phase 415 Volt input and out put voltage system construction Delta and star vector group DYN Regulation better than 2% power factor improvement of 0.75 lag to lead frequency 47 to 53 Hz insulation resistance more than 500M Ohm load regulation <4% capacitance coupling 0.01 PF with class of insulation Class-A at temperature 0-45 Degree centigradea ambient oil cooled of efficiency 97% and above mounted inside MS steel enclosure with cover and stud on fibre glass plare copper sheilded between primary and secondary coil totally earthed/grounded complete.

Supply, install, testing & commissioning out door type cubical panel board outer shell made out of 3.15mm thick MS sheet and inner shell made out of 2mm thick MS sheet and MS angle section 50x50x6mm mounted on PCC 1:2:4 type B-1 platform 60cm above and 45cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by keys having chromium plated 19mm dia fancy lock, 'U' type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabricatiion and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :- (a) TPN Copper bus bar 400 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size "F" class insulators not less than 1.0 mtr long. (b) Incoming MCCB 200 Amps 4 pole 415 Volts AC, Icu=100% Ics, having microprocessor based release for over current, short circuit & earth fault with display and fault discrimination rupturing capacity 35 KA. Confirming to IS/IEC 60947-2

Supply and fix rubber mat of 2 meter x 1 meter x 19mm suitable for 11 KV complete all as specified and as directed.

M&L for load line MCCB enclosures in door type, made out of 2mm thick MS sheet with front openable single door system lockable/open able by keys having chromium platd 19mm dia fancy lock suitable for 3 phase 4 wire 415 volt, 50 Hz tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 volts factory fabricated having modern fabrication and testing process including fixing of 32 Amp MCCB 4 pole with fixed thermal and magnetic setting, Ics=100% of Icu, provisioning holes for cable entry and exit complete all as specified and as directed.

S&F surge protection device (SPD) 7.5 Module with 18mm per module, 3P+N, 50 KA including all electrical connections as required complete all as specified and directed. Make :- Schneider Cat part No A9L 16300 or ABB/Legrand.

Supply and fix LED Post top with moonlight effect and efficient light distribution having IP 65 protection complete all as specified and as directed.Make:-CG Cat part No LPTM-40-CDL or Havells / Bajaj.

S&F PVC kisok box for garden light of size 200x200mm including fixing of phase and neutral terminals complete all as specified and directed.

Supply, installation, testing and commissioning of factory made street light panel suitable for single phase and neutral consisting of 40 Amps MCB SPN-01 No, Contractor rating 32/SP-1 No, Astronimical timer-1 No operation on 220 Volt, 50 Hz AC supply with max load 6 KW including mounting on wall/pole where directed and making necessary electrical connections with the existing cable by using new cable gland and suitable size of aluminium lugs, MS clamp complete all as specified and as directed. Make :- Havells Cat Part No IHXSS01060 or Indo Asian/ Schneider/ Nature switch etc.

Supply and fix rubber mat of 2 meter x 1 meter x 10mm suitable for 1.1 KV complete all as specified and as directed.

SCHEDULE A PART VII (SEWAGE DISPOSAL)

Construction of septic tank for 50 users including excavation, foundation concrete, brick masnary, RCC slab in M-25 etc complete all as specified in particular specificaton and as shown on drawing No TD/217 Sheet No 1/2 & 2/2.

Construction of soak well of size 1.2 metre (d) dia and 3.00 metre (effective depth) deep including excavation, foundation concrete, brick masnary, RCC slab in M-25 etc complete all as specified in particular specificatons and as shown on CELZ drawings No TD/576 sheet No 1/2 and 2/2.

SCHEDULE A PART XI (REF AND AC)

Supply, installation and testing voltage stabilizer for automatic operation single phase naturally air cooled copper wound indoor type and designed for input varriation between 170 Volts to 250 Volts with output voltage stabilized at 230 volt with accuracy ± 2.5% of capacity 5 KVA including digital display complete all as specified and as directed.

M/s Deepak kumar sinha

Agrawal Enterprises