Renovation and Painting of External Facade, Boundary wall and Common area of SIDBI Officers Flats at 16MM Marg Lucknow

S.NO DESCRIPTION DSR AMOUNT NS AMOUNT

2 ELECTRICAL WORKS 2,98,994.00 10,46,536.00

4 GRAND TOTAL Incl. GST (DSR+NS) Rs. 61,70,170.00

4 GRAND TOTAL Incl. GST (DSR+NS) Rs. 61,70,170.00

Digitally signed by AMIT

S.NO. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

EXTERIOR FINISHING

1 13.45 Finishing walls with textured exterior paint of required shade :-

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer

applied @2.20kg/10 sqm

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied

@ 0.75 ltr /10 sqm

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90

ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90

ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering

and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height

made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock

system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable condition for the required duration as approved

8 14.72 and removing it there after. The scaffolding system shall be stiffened with bracings,runnrs, connection with SQM 2200.00 338.25 744150.00

the building etc wherever required for inspection of work at required locations with essential safety features

for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of

the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of

duration of scaffolding.

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel

paint of approved brand and manufacture and required colour on old work

Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the

patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based

polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of

Engineer-In-Charge.

Digitally signed by AMIT

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as

per direction of Engineer- in-charge.

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres

15.40.2 Thickness above 40 mm up to 75 mm SQM 110.00 433.55 47690.50

Dismantling C.I. or asbestos rain water pipe with fittings and clamps

including stacking the material within 50 metres lead

a) 15.42.1 75 mm diameter pipes RM 11.00 75.70 832.70

b) 15.42.2 100 mm diameter pipes RM 11.00 78.00 858.00

c) 15.42.3 150 mm diameter pipes RM 11.00 80.25 882.75

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 metres lead.

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade

made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in

required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints

with line sand etc. all complete as per the direction of Engineer-in-charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish

16 16.83 etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately SQM 83.00 131.75 10935.25

and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level,

curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the

joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall

be supplied by the department free of cost).

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed

18 4.5 plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and

setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.

1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal

size derived from natural sources)

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by

standard power driven percussion type or of approved make including tapering of all edges, making square

shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes

etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

26.28.1 75 mm average thickness sqm 22.00 378.00 8316.00

Digitally signed by AMIT

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by

using alkaline chemical rust remover of approved make with paint brush and removing loose particles after

24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all

complete as per direction of Engineer-In-Charge.

a) 26.29.1 Bars upto 12 mm diameter rmt 22.00 8.25 181.50

b) 26.29.2 Bars above 12 mm diameter rmt 22.00 16.45 361.90

Rust Passivation: Two component, low solvent, zinc rich epoxy resin based Anticorrosive Treatment of

reinforcements in coats with time interval of minimum 4 hours between each coat of the approved makes.

21 The application shall be done by brush or spray as per Manufactureres recommendation, complete. The sqm 22.00 450.00 9900.00

rates are inclusive of all materials, labor, machinery, equipment, tools, tackles etc. and disposal of debris, all

complete. Mode of measurement will be per sqmt of exposed area of concrete.

Corrosion Inhibitor- Coat of Concrete Penetrating Corrosion Inhibitor which works on Bipolar Inhibition

22 Mechanism of the approved makes on concrete surface to be repaired by using brush or spray at dosage sqm 22.00 350.00 7700.00

specified by the manufacturer. Mode of measurement will be per sqmt of exposed area of concrete.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per

specifications and direction of Engineer-In-charge complete in all respect.

26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make SQ MTR 22.00 285.20 6274.40

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum

depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for

sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved

make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.

26.30.1 Upto and including 12mm dia Holes 55.00 141.20 7766.00

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line

including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at

25 26.39 required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance Nos 55.00 236.90 13029.50

between injection nipple with adhesive chemical of approved make and allow it to cure complete as per

direction of Engineer-In-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to

be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with

existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-

27 18.29 Supplying pig lead at site of work. quintal 0.33 29875.40 9858.88

28 18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS :1536 :

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding

the cost of pig lead :

Digitally signed by AMIT

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to

IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard

section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to

centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing

approved anodised aluminium standard section around the opening, all complete as per requirement and

direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with

elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of

self priming of cementatious waterproofing polymer (dilution with water in the ratio of 1:1) and two coats of

cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly

cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all

respect as per the direction of Engineer-in-Charge.

32 13.4 12 mm cement plaster of mix

33 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Repair Micro concrete: Application of repair Micro-concrete of M40 grade for Making up lost section of

concrete for thickness more than 30mm, after the application of bonding agents to ensure stability of the

concrete, followed by curing with water for at least 7 days. The rates are inclusive of all materials, labour,

machinery, equipment, tools, tackles

Thixotropic Repair Mortar:

Repair with Dual shrinkage compensated, trowelable fibre reinforced thixotropic repair mortar. Repairs to

the deteriorated/damaged areas of RCC elements in the structure shall be carried out by using powder

37 NDSR Polymer Modified repair mortar. The polymer modified mortar is applied when the epoxy bonding coat is sqm 22.00 2200.00 48400.00

still tacky. In one application maximum 25 mm thickness shall be built. Subsequent layer shall be built with

one bond coat of Polymer modified cement slurry. The polymer modified repair mortar shall be mixed,

applied and cured as per technical specifications.

Digitally signed by AMIT

FRP :- Application of carbon fiber wrapping for beams, columns & slub in distressed part and sagging part of

beam, column & slub to prevent further sagging.

Providing and applying required coat of water based Deep penetrating sealer on conrete surface, beams

39 NDSR columns, plasters walls, water tank etc.to react with cement and pentetrate in concrete to make with intert sqm 55.00 1050.00 57750.00

to chlorides/chemical and act as water resistant.

40 NDSR Supply and fising of EPDM gaket (more than 60 gram per meter) kg 220.00 320.00 70400.00

Construction of portico at entrance, including new structure and waterproofing treatment, complete as per

MULTIPLYING FACTOR @0.973 FOR 18 % GST 0.973 4364630.86

COST INDEX @ 1.03 4495569.78

Grand Total of Civil Works 4495569.78 3,29,070.00

Grand Total of Civil Works 4495569.78 3,29,070.00

Digitally signed by AMIT

ELECTRICAL WORK

S.NO. DSR 2025 Items Unit QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned

1 2.5 copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs

and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker

2 2.1 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like

socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,

4 15.15 jointing etc..direct in ground (75 cm below ground level) including excavation and refiling the

trench but excluding sand cushioning and protective covering etc complete as required.

15.15.1 63 mm dia (OD-63 mm & ID-51 mm nominal) meter 1100.00 136.00 149600.00

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of

following size in the existing RCC/DWC/ HDPE/ HUME/ METAL pipe as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV

grade of following size on wall surface as required.

10.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr. 1100.00 64.00 70400.00

Supplying and making end termination with brass compression gland and aluminium lugs for

7 11.1 following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1. KV

grade as required.

SITC OF 4 pole MCCB,100A,30kA Ics=100% Icu and

Operational Voltage 690V

Timer set up for street light of 3 phse 100 Amp along with necessary contracotrs and panel box

etc complete in all respect

Supplying and Laying of XLPE ISI Marked, Alumunium conductor arnoured cable in the existing

pipe as required

4 x 25 sq.mm (From MAIN PANEL to VTPN ) meter 100.00 456.00 45600.00

Supplying of following sizes of XLPE Insulated PVC Sheathed Armoured Electric Cables with

11 NDSR Aluminium Conductor for Working Voltage 1.1 KV conforming to IS:7098 (Part-1)/ IS:1554 (Part-1)

complete etc as required.

Digitally signed by AMIT

SITC on wall FRP type water, weather and shock proof junction box of approximate size 150 x200

x 100mm, front openable and locable type and providing and fixing 16 amp terminal block

12 NDSR suitable for 6 Sq.mm conductor - 4 nos and DIN channel of suitable length - 2 nos., 6 amp SPMCB each 40.00 1725.00 69000.00

10 KA 'C" characteristics curve - 2 nos., earth stud 1 nos. 2 nos. washer, spring washer and nuts

etc as required (IP 54)

Supply of LED based Spike light, housing made up of pressure die cast aluminum Alloy with

effective thermal management,sturdiness and embossed brand name/logo name of manufacturer

and optics made of surface mount reflector with toughened. The fixture should have a minimum

13 NDSR system efficacy of 80lumen/Watt and a minimum system lumen output of 640 lumens and each 20.00 6038.65 120773.00

maximum system wattage of 8 Watts.The fixture shall have a CRI of minimum 80 and beam angle:

50-55deg. The fixture shall be designed for a system life of 50,000 hours @70% lumen

maintenance. Ingress Protection of IP67 (lamp and gear Compartment)

Supply of 11W LED Decorative Bollard with System efficacy of 70 lm/W (770 lumens). Luminaire

shall be made up of pure polyester power coated casted Aluminium housing with seamless

polycarbonate diffuser and asymetrical photometric distribution, having dimension of 150X70mm

with height of 800mm. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs

of EMC/ceramic package from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/

Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-

biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall

be with IP65 and IK10 protection.

SITC of Gate Light Fitting Light House model, outdoor type, environmental friendly, decorative,

insect/moisture/dust proof luminaire, integral .Suitable for 45W LED for , cast aluminium spigot

base with aluminium alloy of low Luminaire finished with powder coat, translucent Perspex prism

diffuser, UV stabilized to avoid yellowing effect.IP 54 etc as required.

Digitally signed by AMIT