Purchasing and Installation of Decorative poles with Fancy LED light for 13/17 sector and street ligths for Ghosli Colony, Sector 11 in MC Panipat under D Plan Scheme

Amount

Supply of 9 Mtr. GI pole including Bracket bottom part of pole having SG Iron Casted base of 725 mm height and weight 35 kg, pole dia 114 mm 4.5 thickness up to 6-meter height pole, decorative casting parts are PU panted in three layers coating in which 1st layer with ETCH primer, 2nd layer with PU paint, service window having loop in loop out 4-way connector 40 amp suitable for 10 Sq mm wire plate 400*400*16 mm, Bracket Double sided decorative bracket height 3 meter pole dia 60-mm one sided dia 48mm having multiple cast iron embellishment with of the brackets is 2500 mm. And supply of 2 Nos. of street light empire with 120 w led Height 600 mm, width 625 mm single piece poly carbonate diffuser 3mm thickness, rubber gaskets are provided at appropriate location for dust and water protection . Complete fitting is pure polyurethane paint coated with corrosion resistance and chemical achromatized protection. Note Photo for better understanding of design and specifications od LED Lights and Decorative poles is attached along with. Glomac/VAK Lighting/Havells/Bajaj/Crompton Glomac/Havells/VIPIN S.T. Poles

Supply and eraction of 25 Meter (Length Of theTape) Pressure Sensitive Adhesive Plasticized Pvc Tapes having 25 mm Width ISI Marked/PwD Standards

Supply and eraction of Type A Rigid Pin Type Porcelien Insulator for 11 KV bearing Voltage, including MS Clamp and nut bolt for necessary connection0

Supply and eraction of 6 sq mm 3 Core Aluminium Unarmoured Cable Make: Grandlay/Havells/POLYCAB/RR Kable

Supply of LED Street light fitting LED Rating (in Watts)/System Wattage/Rated Power: 30W Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP67 Warranty for free replacement (in years) 5 Input operating Voltage range and frequency: 90 to 300 Volts AC at 50 Hz+/-2 LED chip Efficacy ≥130 Lm/Watt Heat sink should be die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively :Yes Operating temperature range: -20 deg. C to +50 deg. C Short circuit Protection: Yes Over load protection: Yes Over Voltage protection: Yes Reverse polarity: Yes The luminaire shall be protected against surges and transients ( Internal) >/=5KV Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest: IP66 Number of electronic control gear (power supplies): 1 No. Light Source SMD LED Chip as per: LM 80/IS16106 Length of ISI marked three core wire (shall be provided along with supply of material): 50 cm LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab /NABL/ILAC accrediated lab. Reports shall be furnish to the buyer / consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc.:Yes LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab /NABL/ILAC accrediated lab. Reports shall be furnish to the buyer / consignee on demand (LM-80 report shall have the Pohoto Biological: Yes Availability of test Report from Central Government Lab /NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012: Yes Seller shall furnish the Type test reports to the buyer / consignee on demand:Yes "Manufactures Name and and brand on the aluminium die cast body: " Engraved/Embossed Make: Havells/Crompton/Bajaj

Bidder Name

Amount

Royal Traders(GSTN-06BDLPK6716N1Z1)