WBPWD/SEHEC/SKHED/NIQ49/18-19

Amount

S&F MS angle iron structure made of (80x80x6)mm / (50x50x6)mm MS angle 50mm X 8mm MS flat, nut bolt etc to support 350mm dia MS pipe, chair for fuel tank & AMF panel etc. Incl painting as per GS.

Supply and Installation of exhaust pipe line connection with MS black pipe 350mm (14”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

S&F 350mm dia MS heavy type long bend

S&F 350mm dia MS heavy type 'T'

S&F 350mm dia MS plug.

Supply and Installation of exhaust pipe line connection with MS black pipe 250mm (10”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

S&F 250mm dia MS heavy type long bend

S&F 250mm X350mm MS heavy type reducing ''T''/ ''Y''

Painting the 350 dia MS black pipe ( approx 30mt) by Aluminum paint of two coat over the RO primer. Approved make.

Painting the 250 dia MS black pipe (approx 20mt) by Aluminum paint of two coat over the RO primer. Approved make.

Wrapping the Exhaust pipe line (350mm dia) with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool.as per direction of EIC.

Wrapping the Exhaust pipe line (250mm) with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool.as per direction of EIC.

S&F rain protection canopy for 350mm Exhaust pipe.

wrapping the residue type exhaust silencer.

Hire charges for scaffolding by bamboo required rope of square type arrangement for smooth working & carriage of MS black pipe by vertical run & dismantling at the end of work.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Covering the 65mmX8mm GI Neutral bar by heat shrinkable black colour PVC Sleeve.

S&D of HSD for testing & immediate run of DG set. Incl carrying charge

Supply & Laying of 1.1 KV grade single core 500Sqmm Copper Aurmoured cable, [Make :-Havells/ Gloster / Polycab / Crystal] after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish

Supply & Laying of 1.1KV grade 16core 2.5Sqmm Copper Aurmoured control cable, [Make :-Havells/ Gloster / Polycab / Crystal] after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish

Supply & Laying of 1.1KV grade 2core 6Sqmm Copper Aurmoured cable, [Make :-Havells/ Gloster / Polycab / Crystal] after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish

S&D 1.1KV grade 4core 300Sqmm PVC/ XLPE aurmoured aluminium conductor cable. [Make :-Havells/ Gloster / Polycab / Crystal]

Laying of five cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of five cables above 185 sqmm in an underground trench in single tier formation (horizontal) the trench size : 1550 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between every two cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4core 300 Sqmm

Single core 500 Sqmm Copper Aurmoured cable

16core 2.5Sqmm Copper Aurmoured cable

2core 6Sqmm Copper Aurmoured cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4core 300 Sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type heavy duty long barrel copper sockets and insulated tapes etc., including supplying sockets, tapes. [ make: Dowels]

S&F 2 Kg capacity ABC type Gas pressure (DCP) fire extinguisher on wall by suitable size of iron bracket (Make - Fire Shield)

S&F 9 ltr. Capacity round fire bucket with iron hook and duly filled up by sand.

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

JAYBEECO

S. G. ENTERPRISE

GHOSH ELECTRIC WORKS