Construction of new OPD block at IGMC Shimla SH Providing lighting arrangement in connection passenger from new block to existing block-D and ceiling mounted exhaust fan etc in the attic floor and toilets

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Unarmoured cable 10 sq. mm (twin core)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset neutral link, earth bar, din-bar, detachable gland plate,blanking plate, cable, identification labels interconnections,phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-16 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Triple pole & Neutral. Cat-A.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

6 modules(205mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

S.P. 15/ 16 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Cutting of plastered brick wall for lift opening including removal of debris from left wall as required at site.

Providing and installation of following type of recess mounting square/ round type LED Panel with white powder coated extruded aluminium diecast housing equiped with specially designed cast aluminium heat sink with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories including making suitable cut-out in the existing ceiling, connections, testing and commissioning etc. as required. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Panel Light 36 W (2'X2')

Providing and fixing UPVC trunking100mm*40mm MK make on surface as required complete in all respects

Supplying and erection of 2 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Supplying and fixing of following way SEGREGATED, triple pole and neutral, IP-43 Double door sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 module MCCB incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required. Make: L&T, Schneider, Siemens, ABB, Legrand, C&S etc.

4 way, MCCB+12+12 DD

12 way, MCCB+12+36 DD

Providing & fixing Multifunctioning meter (V,A,F)PF i/c all accessories like Current transformer ,phase indication lamps 3 nos,control mcb 6 amp & CT shorting links in the existing panel board i/c connections etc as required complete in all respects.

Providing & fixing Led flood/Beam light 70 watt of syska make code no SSK-HBG-70 watt or its equivalent make as required complete in all respects.

Providing & fixing Fresh Air ceiling ventilation fan of standard make 130mm sweep i/c making connection etc as required complete in all respects.

Supplying & fixing of lift machine hook comprising of M.s plate 12mm thick size 1'X 1' U shaped 25 mm dia ms rod 30" long1"dia threaded at oth ends with 4 nos nuts & washers as required complete in all respects.

sai electricals