Supply, installation, testing and commissioning of electro-mechanical equipments and construction of pump house/panel room/ operator room at water supply scheme Grendwan

Amount

(Part A Electro-Mech.) WSS Grendwan (Adv. Cost Rs. 56,50,000/-)

Supply, Installation, Testing & Commissioning of Bore Well Submersible Pumping Unit as per IS 8034 for with following specification are as under : PUMP : Discharge Range = 2000-4000 GPH Head Range= 220 -270 mtrs Efficiency = Not less than 50% Speed = 2900 Rpm Type of pump = Bore Well Submersible Pump Type of fluid to be handled = Clear Water MOTOR:- Motor Rating= 20.00 HP/ As per OEM Method of starting = Star – Delta Speed = 3000 (Sync). Frequency = 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 phase Efficiency = Not less than 90% Class of insulation = F/Suitable for above parameters Rest of Specification/Details are as per clause 1 of SBD

Fabrication, providing, fitting and lowering of column pipe conforming to IS: 1239 of length 10 Rft into the 200/ 250/300 mm casing dia. production well up to the desired depth ; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 Size : DN 65 Class: B (Medium) Rest of Specification/Details are as per clause 7 of SBD

Providing/supplying and fitting of G.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class-B confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size : DN 65 Class: B (Medium) Rest of Specification as per clause 8 of SBD

Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and reaming of bottom lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (All kinds of soil 01 meter from cutting edge)

Filling available excavated earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead upto 50 m and lift upto 1.5m.

Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing, ramming, all leads lifts and all carriages complete.

Centering and shuttering including strutting , propping etc. and removal of form work for Foundation, footings, bases for columns

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . all work upto plinth level with 1 : 2 : 4 mix (1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size)

Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size : DN 65 Class: C Heavy Rest of Specification/Details are as per clause 09 of SBD

Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units . Size: DN65 PN:1.6/16 Rest of Specification/Details are as per clause 12 of SBD

Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve( NRV) as per IS 5312. Size: 65 mm PN: 1.6/16 Rest of Specification/Details are as per clause 13 of SBD

Providing, fitting, testing and commissioning of ARV (Air Release valve) as per IS 14845 to be fitted to G.I rising Main. Size: 50mm PN: 1.6/16 Rest of Specification/Details are as per clause 14 of SBD

Fabrication ,Providing and fitting of 90-120 degree bend/elbow to be fabricated out of G.I pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. Size:DN 65 Rest of Specification/Details are as per clause 15 of SBD

Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 65 mm Rest of Specification/Details are as per clause 16 of SBD

Fabrication of gantry mechanism/CGI Shed by way of providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of steel primer and 02 coats of paint of approved shade all complete welded. The drawings and Dimensions for Gantry/CGI Shed will be provided by Site In Charge at the time of execution of job Rest of Specification/Details are as per clause 21 of SBD

Fabrication of gravel Hooper for proper feeding of gravels to the borewell and platform to bear the load of pumping unit, column pipes etc Rest of Specification/Details are as per clause 22 of SBD i. In stringers , treads , landings etc of stair cases including use of chequered plate wherever required , all complete

Providing and fitting of M.S 4 inch hinges -6 no and M.S handle heavy -2no., Anchor bolts with nuts (M16) of 0.3 m long = 04 No. Metallic strip (350mm×50mm×3mm) = 02 No. Rest of Specification/Details are as per clause 23 of SBD

Supply, Installation and testing of motorized chain hoist with hook suspension along travelling trolley of proper specifications Capacity = 5 ton Hoisting speed = 2.4 M/Min Hoist motor H.P = as per requirement No. Of chain falls = 4 Min. Height of lift = 6 M Rest of specification as per cluase 25 of SBD

Creation of pole mounted , outdoor type Electric Sub Station by way of S/I/T/C of 11/0.433 KVA , 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 Aluminum wound Specifications conforming to IS : 1180 (Part 1) 2014 with latest amendments Type of cooling: ONAN. Rating: 63 KVA HT Transformer, 3 phase (Level 2). Manufacturers certificate be apended and rest of specification as per cluase 26 of SBD

Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps as per details in Clause 27 of SBD

Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specs Rest of Specification/Details are as per clause 28 of SBD

Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap as per details in Clause 29 of SBD

Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class as per details in Clause 30 of SBD

Supply and fitting of 11 KV polymeric composite pin insulator as per details in Clause 31 of SBD

Supply, installation, errection of 9 mtrs long H.T pole of specifications ST- 410 (sp-33) as per details in Clause 32 of SBD

P/F of Galvanized nuts, bolts of various sizes as per site requirement.as per details in Clause 33 of SBD

P/F Danger Plate with clamps as per details in Clause 34 of SBD

Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps as per details in Clause 35 of SBD

Providing and Fitting of PG clamps

Providing and fitting of Galvanized stay set complete as per details in Clause 36 of SBD

Painting of poles Red oxide

Painting of poles Aluminum paint

Providing and fitting of ACSR as per details in Clause 39 of SBD

Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.T cable (ABC type ) of 11 KV grade with following specs. Size (cross sectional area in sq mm) = 3×35 with reinforced wire Phases: Red, Yellow, Blue

Providing and fitting of Anchoring clamps required for holding of 3 – Core , 35 Sq. mm H.T AB Cable as per details in Clause 40 of SBD

P/F of 11 KV cable termination kit as per details in Clause 41 of SBD

Providing and fitting of LT Distribution box for HT transformer Capacity of transformer: 63 KVA Rest of Deatils/Technical specification are as per clause 42 of SBD

Providing and fitting of PRODIGY LT Metre of following specification complete with all fixtures required for fitment at site Type: E3L100, 3 Phase, 4 wire Measurements offered: KWh,KVARh,KVAh,KVA Voltage : 3x240V(415v),50HZ Ib : 40A Imax: 200A Battery: Lithium

Fabrication Providing and fitting of modular control panel of appropriate size fabricated out of 14SWG sheet having required openings/vents and protection class: IP-55 and fitted with accessories MU-G30 and Rest of Deatils/Technical specification are as per clause 43 (e)of SBD

Providing, fitting, testing and commissioning of Manually operated copper wound, 3-phase, AC power supply multi step voltage stabilizer. Rating::50 KVA Manufacturers test certificate to be apended and rest of specification as per clause 44 of SBD.

Providing and Fitting of 3 /3.5/2-Core, XLPE Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control as per clause 46 of SBD. i) 35 sqmm , 3.5core, LT cable

ii) 10sqmm, 2 core, LT cable

Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 as per details in Clause 47 of SBD Size: 16 sq.mm

Providing and fitting of 50 mm square single core copper cable for interconnecting various electrical gadets as per IS 694: 2010 along with thimbling as per requirement.

Providing and Fitting of cable tray of suitable size for carrying the cable inside the machinery room.

P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per specification in clause 48 of SBD

Supply, installation of 6 kg co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval) . Rest of details as per specification in clause 49 of SBD

Illumination of Premises: Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items. 1) 3 Way Terminal Connector 20 Amp. 2) 3 No MCB 8 Amp. Rest of Deatils/Technical specification are as per clause 50 of SBD

Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs: Input: 90-240 V 50 Hz Power Factor: >0.9 Rest of Deatils/Technical specification are as per clause 51 of SBD

Providing and installation of Junction Box with DP 32Amp MCB to serve as amin switch for LED lighting. Rest of Deatils/Technical specification are as per clause 52 of SBD

Providing, Installation and testing of 2KVA fully automatic voltage stabilizer Rest of Deatils/Technical specification are as per clause 53 of SBD

Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter with 12V, 180AH Tubular inverter Battery. Rest of Deatils/Technical specification are as per clause 54 of SBD

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen Rest of Deatils/Technical specification are as per clause 55 of SBD

TOOL KIT For Maintenance: - The Tool Kit for maintenance as per detailed specification in cluase 56 of SBD

Providing of good quality conveinence and utility items as per details in Caluse 57 of SBD

Fabrication of 7’ (L) x 6’(B) x 1.5' (H) angle iron bed for operators with back-height of 2 feet. The detailed drawing will be provided by site incharge. Rest of Deatils/Technical specification are as per clause 58 of SBD

Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet , 3 nos. Rest of Deatils/Technical specification are as per clause 59 of SBD

Providing of solar/ electrical lantern chargeable on both solar & electrical 220v supply.

Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each)

Providing of 1 KW heat convector for operators for winter season.

Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metal Rest of Deatils/Technical specification are as per clause 63 of SBD

Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipments installed at site size= 7x5 feet Rest of Deatils/Technical specification are as per clause 64 of SBD

Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments. Rating: 40 KVA , Air Cooled Manufacturers certifice to be apended and rest of specification as per cluase 66 of SBD

Providing and fitting of L.T 35 Sq. mm , 1 core , capable to work upto 1.1 KV , XLPE insulated , galvanized steel strip armoured copper cable conforming to IS : 7089(part -1) 1988 With latest amendments to be fitted from D.G Set to Modular control panel Rest of Deatils/Technical specification are as per clause 67 of SBD

Providing corrugated G.S Sheet roofing and on the all sides of DG Set shed including vertical/ curved surface fixed with polymer coated J or L Hooks , bolts and nuts Rest of Deatils/Technical specification are as per clause 68 of SBD

Providing, Installation, Testing & Commissioning of complete switchgear unit for protection of D.G Set consisting of 200A MCCB 3- pole, 415 V, 50 KV breaking capacity Rest of Deatils/Technical specification are as per clause 78 of SBD

Carriage of sand, stone aggregate by mechanical transport including loading , unloading and stacking (average distance-5km) Rest of Deatils/Technical specification are as per clause 79 of SBD

(Part B) Pump House of WSS Grendwan (Adv. Cost Rs. 15,72,000/-)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed (1 meter from cutting edge) All kinds of soil

Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked material : All kinds of soil

Providing and laying of dry stone solling tightly hand packed on horizontal levels.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)

1 : 4 (1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( Welded)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size )

Providing and fixing of 12 mm thick Ply Board soffit along with supporting of First Class Popular wooden ballies

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood (35 MM THICK)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood (35 MM THICK)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First class Kail Wood

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

P/F of 1st quality ceramic glazed tiles confirming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT,SOMANY,KAJARIA or equivalent make in all colour, shades except bergandy, bottle green, black of any size as approved by Err. incharge in skirting, risers of steps and dados over 12mm thick bed of cement mortor 1:3 (1 cement, 3 coarse samd) and jointing with grey cement slurry @ 3.30 Kgs/SM including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe, 40 mm dia

Providing and fixing of PVC/CP sanitary fittings whatever is required at site ( Complete Job)

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Fixing of plumbing / Electrification/ Iron Grill to windows including cost of plumbing items/C.P fittings / Conductors/ LED Bulbs/ fans /MCB,etc( Complete Job)

Carriage by Mechanical Transport including loading, unloading and stacking Cement and Steel (30 Kms)

Sand, stone aggregate below 40 mm nominal size (30 Kms)

Stone aggregate 40 mm nominal size and above ( 30 Kms)

Quarry Stone (10 Kms)

Bricks (35 Kms )

Carriage by Manual Labour including loading, unloading and stacking Cement (400 m )

Steel (400 m)

Sand, stone aggregate below 40 mm nominal size (400 m )

Stone aggregate 40 mm nominal size and above ( 400 m )

Stone Soling / Stones (400 m )

Bricks (400 m)