Installation of Public address system for important announcement for visitors and parking area as well as playing a soft music to make the environment at EKAMRA HAAT, Bhubaneswar.

Amount

Suppy, intallation, Testing & Commissioning of weatherised Horn speaker with power ratings of 15W continuous or more, with Max. SPL 112dB or better, should have Frequency response 280Hz -12 kHz or better; should have IP65 or better ratings; should have Low & Hi impedance, should have required the mounting accessories complete in all respect as direction by EIC.(TOA/ Renkus Heinz/ Bosch)

Suppy, intallation, Testing & Commissioning of Mixer power amplifier, haveing rated power output 240W or better, with Frequency response of 50-20kHz or better; Should have THD <1% at 1 kHz, 1/3 rated power; should have S/N ratio of 60dB or better, should have Nominal impedance of 4Ω or 70/100V complete with standard acessories as required complete in all respect as direction by EIC.(TOA/ Renkus Heinz/ Bosch)

Suppy, intallation, Testing & Commissioning of desk-top paging microphone with polar pattern of unidirectional or better, with rated impedance 600 Ω or better, senstivity of -58 dB, should have Frequency response 100 Hz - 10 kHz or better, should have Push-to-talk switch, complete with standard acessories as required complete in all respect as direction by EIC.(TOA/ Beyerdynamic/ Sennheiser )

Supply , & laying of 2 sqmm 1.5 core multistrand copper speaker cable in existing conduit with all nesseerry clamps as required complete in all respect as direction by EIC.(Gotham/Sommer/Finolex)

Weather eather proof clips for speaker to cable connectivity as required complete in all respect as direction by EIC.(TOA/ Renkus Heinz/ Bosch)

Suppy, intallation, Testing & Commissioning OF 6U RACK FOR EQUIPMENTS as required complete in all respect as direction by EIC.

Supply, Installation, Testing & Commssioning of Low profile High SPL all weather loudspeakers with 5.25" LF Driver & 1.0" or better VC compression driver; Frequency Range of 100 Hz - 16 kHz or better; Nominal Dispersion : 90°H x 60°V with rotatable horn ; Long term Power handling of 200 W or better; Sensitivity : 91 dB; Min SPL : 110dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for distributed system applications.Shall be rated for IP55 outdoor installations as per IEC 529 specs as required complete in all respect as direction by EIC.(Bose/Sonance/ Atlas ILD)

SITC of Dual channel Power amplifier with a Max Output Power of 1000W per channel, Should have Nominal impedance of 4-8 ohms as well 70/100V. Should have Frequency Response of 20Hz - 20 KHz or better, Should have THD+N <0.04% or better; Should have Senstivity: -10dBV to +14dBu; Should have 2 outputs with dynamic power ≥100 dBA, Should have crosstalk of >80dB, Shall have protection over , high temperature, output short, extra high frequency (EHF), should have optional Network audio connectivity through RJ-45 port for expansion complete with standard acessories as required complete in all respect as direction by EIC.(Bose/ Renkus Heinz/ L-acoustics)

Suppy, intallation, Testing & Commissioning of A-weighted 32-bit fixed/floating-point DSP + ARM; Should have Frequency Response : 20 Hz – 20 kHz or better; 456 MHz Signal processor; Should have Dynamic Range : > 115 dB or better; Should, 8 Digital inputs/outputs, should have Sample Rate : 48 KHz; THD : 0.01%; Ethernet (RJ-45); 100Mb network control complete with standard acessories as required complete in all respect as direction by EIC.(Bose/ Biamp/ Symmetrix)

Suppy, intallation, Testing & Commissioning of 6-channel mixing console, should have 2 mic/6 line (2 mono + 2 stereo) inputs, Should have 1 stereo bus, high grade effects, mic preamps should have XLR balanced outputs complete with standard acessories as required complete in all respect as direction by EIC.(Yamaha/ Allen & Heath/ Mackie)

Suppy, intallation, Testing & Commissioning of desk-top paging microphone with polar pattern of unidirectional or better, should have rated impedance 600 Ω or better, should have senstivity of -58 dB, should have Frequency response 100 Hz - 10 kHz or better, should have Push-to-talk switch, complete with standard acessories as required complete in all respect as direction by EIC.(TOA/ Beyerdynamic/ Sennheiser )

Supply , & laying of 2 sqmm 1.5 core multistrand copper speaker cable in existing conduit with all nesseerry clamps complete in all respect as direction by EIC.(Gotham/Sommer/Finolex)

Suppy, intallation, Testing & Commissioning of 12U Server Rack for office installation complete in all respect as direction by EIC.(Valrack/polytrek/urack)

Suppy, intallation, Testing & Commissioning of Power Management and power supply unit complete in all respect as direction by EIC.(belkin/finloexGotham)

Suppy, intallation, Testing & Commissioning of connectors,patch cord complete with standard accessories complete in all respect as direction by EIC.

Provision of MS Post complete with standard accessories complete in all respect as direction by EIC.

SAMBIT DAS, PROP.- M/S URANUS AND VENUS