ELECTRIFICATION WORK IN VARIOUS PARKS LOCATED IN SANGANER ZONE FOR THE YEAR 2023-24

Amount

FEEDER-PILLAR: Supply and eraction of main feeder pillar fabricate out from 14/16 gauge M.S. sheet size 600 x 450 x 350 mm (App.). The Pillar should be dust and vermaine proof to gather with degreasing and applying two costs of red oxide and two coats of carey enamel paint. The Pillar should comprises the following item: pillar shall be duly hinge door with locking arrangement ( L & Key Lock) the pillar should be mounted with hardware's on angle iron frame of size 38 x 38 x 6 mm & 1000 mm legs duly painted. & grounded 700 mm below ground level with cement concrete mixture providing bricks masonry along angle frame above GL provision for the following (20 Nos.) B) - P and F 240/ 415 V 6/9 KA Breaking capacity (Cat-1) AC MBC with mounting channel on existing board/ sheet including making connections etc. As Required for each outgoing cables. Feeder pillar to each pole using 10 sq. mm cable. 1)- Single Pole 10/12 AMP 2)- Tripple Pole 32 AMP. C) S and F 3 No. busbars of size 25 mm x 3 mm ( 150 mm length APP) duly converted by heat shrinkable sleeves with busbar supporters. D)- P/ F 1 No neutral busbar of size 20 mm x 3 mm (150 mm length APP.) with duly covered by heat shrinkable sleeves with busbar supporters. E)- P & L of Earth terminals including Hardwares duly interconnect- ed with 8 SWG copper wire. F)- P & F Positions cable gland in Brass Nickle plated heavy duty with three metal washers and one rubber ring, double compression flame proof including preparation of cable etc. as reqd. 1. Cable gland 25 mm 2. Cable gland 10 mm G)- S & F tubular/ Bullet type cable Terminal and duly Crimped with Crimping Tool including making cable End ready for crimping and providing insulation tape with co lour code etc. As required- 1. up to & including 25Sq.mm 2. Beyond 25 Sq. mm & up to 50 Sq. mm H)- P & F 6 mm thick bakelite sheet electric grade of size 600 x 450 mm (APP) including making holes for switches etc. with washers and screw complete as required for above items. I)- Inter-connections shall be with 7/0.44 mm PVC copper wire duly Crimped with al. Lugs. J) Supply & Fixing Danger Plates as per specification.

Dismentaling of Damage poles in different parks with the help of Labour and Machinery.Deposit of damage pole from site to central electrical store.

Repairing of dismental/damage pole with cutting, welding, Jointing of base plate etc as required (Labour & Material)

Providing and fixing of IP 65 protected Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 /16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .200 mm X 200 mm X 122 mm

Two coat enamel paint on existing pole including charges of labour, crain etc as required for painting.

M/S Shree Mahaveer Enterprises

sonu enterprises

Jyoti electronics

sonu enterprises