GE(S) BTD TOKEN NO 10 OF 2023-24 CERTAIN BR REPAIRS TO PLUMBING FLOORING JOINERY TO CERTAIN BUILDINGS OF OTM ACCN OUTSIDE THE DEPOT AREA UNDER AOR UNDER AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) complete all as specified and directed .

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified and directed. (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified and directed (thickness of steel sheet shall be 1.25mm) Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. complete all as specified and as directed.

S&F 35mm thick panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I). complete all as specified and as directed.

Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. Note - Wire gauze / glass to be measured and paid separately

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in the same opening etc complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified

S & F in repair (fixing with screws or welding as per site requirement) 300mm mild steel ordinary rat tail rod springs (Helical Springs), including roller & roller plate complete all as specified and directed.

Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and directed.

Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and directed.

Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed

Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and as directed .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Material and Labour for joint free glazed ceramic coloured (Designer tiles for wall) tiles of approved quality in vertical surfaces ofexc 0.11 sqm but not exc 0.18 Sqm x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Material and labour Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, size of tile 600x 600x10mm thick,on 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Description all as per Ser item No 26 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) including tiles of any description etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps (in single piece), , window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl 15mm thick screed bed in in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.

M&L for 20 mm thick Kota stone slabs in steps \ landing of staircase, mirror polished laid over 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F anodized aluminium window glazed/gauged shutter/ventilators shutters/Partition fixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

All as per Srl item No 36 above but steel ventilators top hung. Complete all as specified and direacted.

S&F in repair three track aluminium anodised sliding window with three sliding shutter, the size of outer frame three track 75x37x1.5 mm (using two track for glazed window shutter and one track for wire gauged, the section shutter size 37x18x1.2mm) and glazing with 5mm thick transparency glass of polycarbone including all round suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with all necessary fittings including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.

S&F 100mm size moritice lock of brass, vertical type, 4 levers, complete all as specified and directed.

S & F Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .

S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.

Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed.

Supply and fixing in repair stainless steel, Chromium plated, decorative type, soap dish holder fixed to wall with Chromium plated brass screwes including plastic gutties complete all as specified and directed .

S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .

M&L for 20mm dia fancy type PVC coated MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection complete all as specified and directed.

Supply and fixing GI tubing 15mm bore medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Supply and fixing GI tubing 20mm bore medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron sand cast soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F cast iron sand cast soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only intergral water proofing compound complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Dismantling existing broken unserviceable 1000 Ltrs PVC tank of capacity Complete all as specified and directed.

Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Dismantling existing broken unserviceable 500 Ltrs PVC tank of capacity complete all as specified and directed.

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore (weight 210 gms Minimum) complete all as specified and as directed.

Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

Supply and fixing in repair 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fixing in repair 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.

S&F tee Grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting consisting angle cleats of size 25mm wide 1.6m thick with flag fixed to RCC ceiling with door fasterner or wrapping the suspending wire around the existing wooden/steel/purlin/rafter for suspending grid frame work of size 605mm x 605mm c/c on main Tee and fixed to T-grid as per manufacturer's instructions. The section of main Tee 37mm x 24mm x 0.60mm and perimeter angle 24mm x 24mm x 0.50mm thick shall be fixed to wall with GI screws 40mm long and 450mm c/c along the perimeter of wall all as per manufacturer's instructions.

M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed

S&F Hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site etc incl 5mm thick PVC sheet in strips at the edges as per specifications complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. (As in sunsheds).

Cutting holes in brick walls built in cement mortar (N.exc half brick) for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.FE-410-W (Gde - E-250) Quality A complete all as specified and directed.

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth complete all as specified and directed.

M & L for greasing and oiling for rolling shutter of any type and size to free moving / opening complete all as specified and directed.

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly).

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.

S&F in repairs tank nipple of suitable size at required on ground complete all as specified and directed.

S&F in repairs 32/40mm dia, PVC waste pipe with socket suitable for connection to Waste fittings of length minimum 75 cm complete all as specified and directed.

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repairs mild steel peg stay suitable for steel windows/ ventilators complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, (replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified and directed.

Supply only floor trap 75 mm dia with grating including jointing to waste pipe complete all as specified and directed.

Complete removing of old roof treatment from brick/concrete surfaces including removal of grass roots, hedges/plant roots complete all as specified and directed.

Cutting groves in brick wall 75 mm wide and 65mm deep and shaping horizontal face of groove and filled (after inserting of felt) in cement mortar 1:3 etc complete all as specified and directed.

M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100gms per sqm. over dried plastered surface. (d) Laying 3mm thick APP membrane (mineral finish) reinforced with non woven polyster fabric, by torch application of the overlapping while torching shall be 75mm on longtidinal direction and 100mm on the transversedirection complete all as specified and as directed. MAKE : STP Dr Fixit/Pidilite, Texsa India Ltd/ Tikitar Dansona/Bengal Bitumen Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200ml/bag of cement/as per site reqmt and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

SHARDA ENTERPRIES

M/S BHAGWATI CONSTRUCTION COMPANY

Aman Enterprises

ADP Engineering

M/s Kamal Constructions

RAKESH KUMAR GARG & CO.

SAHIL CONSTRUCTIONS

SUBHASH ARORA CONSTRUCTION CO

Ajay Enterprises

V K CONTRACTOR