Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-Finance | L1 | Accepted-Finance Being L1 Bidder | |
| 2 | L2₹48.6 L+₹84,900 (1.78%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 Bidder | |
| 3 | L3₹49.2 L+₹1.5 L (3.10%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 Bidder | |
| 4 | L4₹49.8 L+₹2.1 L (4.31%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 Bidder | |
| 5 | L5₹49.9 L+₹2.1 L (4.38%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 Bidder |
| Sl No | Description | Qty | Unit | JPR CONSTRUCTIONS AND ENGINEERS L8 | M/s Jai Sree Hari L6 | L DURGA GANESH L4 | c p engineering works L3 | M/s Bapujee Builders and Traders L7 | ABC CONSTRUCTION COMPANY L2 | M/s MAA BHAIRABI ENTERPRISES L5 | P JAGANNADHARAJU L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down old unsv/burnt LT panels/Feede pillar panels in any capacity and deposited in MES yard and supply, install, testing and commissinoning LT panel board outdoor type of size 1400 mm long X1400 mm width X 450 mm thickness(depth) with double door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 3.15 mm thick at outer sheet and 2.0 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of the following:-Note:- (i) LT panel board manufactured by any manufacturer should be followed by CPRI norms/certified and also zonal approved maufacturers only. (ii)The contractor shall be arranged General (SLD), circuit lay out drawings & Switch gear items makes/brands submitted for prior approval by the Accepting Officer/Engineer -in-charge before procurement/ordering.(i) Incoming:- MCCB,4 pole,400 Amps,415 Volts, 50 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(ii) Outgoing :- ON-Load change over switch with front operated handle 400 Amps,415Volts 4 Pole incl steel coated factory fabricated spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N-01 Nos. Make:-ABB/ Siemens/Schneider/Legrand.(iii) Outgoing:-MCCB,4 pole,250 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(iv) MCCB,4 pole,200 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(iv) MCCB,4 pole,160 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(v) MCCB,4 pole,125 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vi) MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vii) MCCB,4 pole,63 Amps,415 Volts, 16/18 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-04 Nos Make:-ABB/ Siemens/Schneider/Legrand.(viii) MCCB,4 pole,40 Amps,415 Volts, 16 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(ix) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S(x) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No.Make:-AE/Selec/L&T(xi) 400/5A current transformer -03 No's Make:-Kappa(xii) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS, Make:-AE/Kaycee/L&T(xiii) Protection fuses& controll wiring -03 Nos Make:-Nippon(xiv) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 800amps rating -01 Set ( 04 Nos) | 1 | Each Job | 5,00,000 ₹5,00,000 | 6,50,000 ₹6,50,000 | 3,55,000 ₹3,55,000 Lowest | 5,20,000 ₹5,20,000 | 5,05,000 ₹5,05,000 | 5,00,000 ₹5,00,000 | 6,00,000 ₹6,00,000 | 4,50,000 ₹4,50,000 |
| 2.00 | Taking down old unsv/burnt LT panels/Feede pillar panels in any capacity and deposited in MES yard and supply, install, testing and commissinoning LT panel board outdoor type of size 1250 mm long X1250 mm width X 450 mm thickness(depth) with double door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 3.15 mm thick at outer sheet and 2.0 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of following:-Note:- (i) LT panel board manufactured by any manufacturer should be followed by CPRI norms/certified and also zonal approved maufacturers only. (ii)The contractor shall be arranged General (SLD), circuit lay out drawings & Switch gear items makes/brands submitted for prior approval by the Accepting Officer/Engineer -in-charge before procurement/ordering.(i) Incoming:- MCCB,4 pole,315/320 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand(ii) Outgoing :- ON-Load change over switch with front operated handle 315/320 Amps,415Volts 4 Pole incl steel coated factory fabricated spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N-01 Nos. Make:-ABB/ Siemens/Schneider/Legrand.(iii) Outgoing:- MCCB,4 pole,200 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(v) MCCB,4 pole,160 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vi) MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vii) MCCB,4 pole,63 Amps,415 Volts, 16/18 to 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-04 Nos Make:-ABB/ Siemens/Schneider/Legrand.(viii) MCCB,4 pole,40 Amps,415 Volts, 16 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-04 Nos Make:-ABB/ Siemens/Schneider/Legrand.(ix) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S(x) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No.Make:-AE/Selec/L&T(xi) 400/5A current transformer -03 No's Make:-Kappa(xii) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS, Make:-AE/Kaycee/L&T(xiii) Protection fuses& controll wiring -03 Nos Make:-Nippon(xiv) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 500 amps rating -01 Set ( 04 Nos) | 1 | Each Job | 4,50,000 ₹4,50,000 | 5,35,000 ₹5,35,000 | 3,45,000 ₹3,45,000 Lowest | 4,25,000 ₹4,25,000 | 4,51,000 ₹4,51,000 | 4,20,000 ₹4,20,000 | 5,20,000 ₹5,20,000 | 4,05,000 ₹4,05,000 |
| 3.00 | Taking down old unsv/burnt LT panels/Feede pillar panels in any capacity and deposited in MES yard and supply, install, testing and commissinoning LT panel board outdoor type of size 1200 mm long X1200 mm width X 450 mm thickness(depth) with double door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 3.15 mm thick at outer sheet and 2.0 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of following:-Note:- (i) LT panel board manufactured by any manufacturer should be followed by CPRI norms/certified and also zonal approved maufacturers only. (ii)The contractor shall be arranged General (SLD), circuit lay out drawings & Switch gear items makes/brands submitted for prior approval by the Accepting Officer/Engineer -in-charge before procurement/ordering.(i) Incoming:- MCCB,4 pole,250 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(ii) Outgoing :- ON-Load change over switch with front operated handle 250 Amps,415Volts 4 Pole incl steel coated factory fabricated spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N-01 Nos. Make:-ABB/ Siemens/Schneider/Legrand.(iii) Outgoing:-MCCB,4 pole,160 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand(iv)MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(v) MCCB,4 pole,63 Amps,415 Volts, 16/18 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vi) MCCB,4 pole,40 Amps,415 Volts, 16 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vii) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S(viii) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No.Make:-AE/Selec/L&T(ix) 400/5A current transformer -03 No's Make:-Kappa(x) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS, Make:-AE/Kaycee/L&T(xi) Protection fuses& controll wiring -03 Nos Make:-Nippon(xii) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 400 amps rating -01 Set ( 04 Nos) | 1 | Each Job | 4,00,000 ₹4,00,000 | 4,38,000 ₹4,38,000 | 3,00,000 ₹3,00,000 Lowest | 3,35,000 ₹3,35,000 | 4,10,500 ₹4,10,500 | 3,35,000 ₹3,35,000 | 4,20,000 ₹4,20,000 | 3,33,000 ₹3,33,000 |
| 4.00 | Taking down old unsv/burnt LT panels/Feede pillar panels in any capacity and deposited in MES yard and supply, install, testing and commissinoning LT panel board outdoor type of size 1000 mm long X1000 mm width X 450 mm thickness(depth) with double door type suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz, ,cubicle and shall have air ventilation arrangement,IP-54 Protection, floor mounted, free standing, dust and vermin proof, with see through glass as per requirement made out of 3.15 mm thick at outer sheet and 2.0 mm thick at internal compartments CRCA sheet and necessary angle/flat irons duly powder coated, hinged doors with rubber gasket, handles.Panel shall have front and rear opening,locking arrangement,cable alleys,cable entry holes for incoming and out going cables,busbar chamber and switch gear compartment,see through glass for indicator lamps, control copper wiring & safety fuses,earthing terminals,affix danger notice plate,aluminium busbar fixed on DMC/SMC insulators and all incoming and outgoing internal connection should be connected suitable rating aluminium bus bars only with RYB color code sleeves/taps, and the panel will be mounted on 50mmX50mmX6mm GI angle iron base frame of height 45 CM above GL as per site requirement and below GL 45 CM and including connecting up of existing incoming and out going cables by using new aluminium lugs and cable gland and connecting of earth strip and providing civil work/PCC foundation (1:2:4) type B1 with studs,bolts,nuts & washers as per site requirement. And complete all as specified and directed and including comprising of following:-Note:- (i) LT panel board manufactured by any manufacturer should be followed by CPRI norms/certified and also zonal approved maufacturers only. (ii)The contractor shall be arranged General (SLD), circuit lay out drawings & Switch gear items makes/brands submitted for prior approval by the Accepting Officer/Engineer -in-charge before procurement/ordering.(i) Incoming:- MCCB,4 pole,200 Amps,415 Volts, 35/36 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(ii) Outgoing :- ON-Load change over switch with front operated handle 200 Amps,415Volts 4 Pole incl steel coated factory fabricated spreader links & steel nuts,bolts and washers of suitable amps rating in RYB &N-01 Nos. Make:-ABB/ Siemens/Schneider/Legrand.(iii) Outgoing:-MCCB,4 pole,125 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand(iv)MCCB,4 pole,100 Amps,415 Volts, 25 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(v) MCCB,4 pole,63 Amps,415 Volts, 16/18 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-02 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vi) MCCB,4 pole,40 Amps,415 Volts, 16 KA,50Hzs Manual drawout type with microprocessor based release system incl factory fabricated steel spreader links & steel nuts,bolts and washers of suitable amps rating in RYB & N.-01 Nos Make:-ABB/ Siemens/Schneider/Legrand.(vii) R,Y,B Phase indicating lamp -01 Set Make:- Jigo/L&T/C&S(viii) Digital Ammeter (0 amps to 500 Amps) with ASS (Ammeter selector switches) -01 No.Make:-AE/Selec/L&T(ix) 400/5A current transformer -03 No's Make:-Kappa(x) Digital Voltmeter( 0Volts to 500Volts)-01 No with VSS, Make:-AE/Kaycee/L&T(xi) Protection fuses& controll wiring -03 Nos Make:-Nippon(xii) Main bus bar & distribution out going distribution busbar size and amps rating x1.5 times rating of controlling MCCBs capacity TPN bus bar 320 amps rating -01 Set ( 04 Nos) | 1 | Each Job | 4,00,000 ₹4,00,000 | 4 ₹4 Lowest | 3,00,000 ₹3,00,000 | 3,10,020 ₹3,10,020 | 4,26,850 ₹4,26,850 | 3,20,000 ₹3,20,000 | 4,00,000 ₹4,00,000 | 3,06,000 ₹3,06,000 |
| 5.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 6.0 sqmm,2 core complete all as specified and directed. | 90 | RM | 200 ₹18,000 | 200 ₹18,000 | 250 ₹22,500 | 199 ₹17,910 | 205 ₹18,450 | 198 ₹17,820 Lowest | 200 ₹18,000 | 198 ₹17,820 Lowest |
| 6.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 10 sqmm,2 core complete all as specified and directed. | 90 | RM | 260 ₹23,400 | 240 ₹21,600 Lowest | 300 ₹27,000 | 523 ₹47,070 | 260 ₹23,400 | 252 ₹22,680 | 240 ₹21,600 Lowest | 252 ₹22,680 |
| 7.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,2 core complete all as specified and directed. | 90 | RM | 290 ₹26,100 | 270 ₹24,300 Lowest | 290 ₹26,100 | 289 ₹26,010 | 290 ₹26,100 | 288 ₹25,920 | 270 ₹24,300 Lowest | 288 ₹25,920 |
| 8.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,4 core complete all as specified and directed. | 90 | RM | 430 ₹38,700 | 420 ₹37,800 | 400 ₹36,000 Lowest | 410 ₹36,900 | 430 ₹38,700 | 405 ₹36,450 | 420 ₹37,800 | 405 ₹36,450 |
| 9.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 25 sqmm,3.5 core complete all as specified and directed. | 200 | RM | 530 ₹1,06,000 | 450 ₹90,000 Lowest | 545 ₹1,09,000 | 555 ₹1,11,000 | 530 ₹1,06,000 | 504 ₹1,00,800 | 450 ₹90,000 Lowest | 504 ₹1,00,800 |
| 10.00 | Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 35 sqmm,3.5 core complete all as specified and directed. | 100 | RM | 620 ₹62,000 | 600 ₹60,000 Lowest | 645 ₹64,500 | 610 ₹61,000 | 620 ₹62,000 | 603 ₹60,300 | 600 ₹60,000 Lowest | 603 ₹60,300 |
Tender Value
Refer Docs
EMD Value
₹87,500
Closing Date
4 Jul 2025, 6:00 pmClosed
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
SPECIAL REPAIRS TO OLD UNSV BLDG LT PANEL BOARDS BLDG INCOMEING CABLES AND CONNECTED ITEMS UNDER GE I GOS
2025_MES_700164_2
8000/122/2024-25/1021/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GOS
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹87,500
Yes
13 Sept 2025
19 Jun 2025
7 Jul 2025
19 Jun 2025
4 Jul 2025
27 Jun 2025
Amount
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 6.0 sqmm,2 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 10 sqmm,2 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,2 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 16 sqmm,4 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 25 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 35 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 50 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 70 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 95 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 120 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 185 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 240 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 300 sqmm,3.5 core complete all as specified and directed.
Taking up/down old unsv underground cable from existing locations and supply, laying and testing cable XLPE insulated,screened,PVC bedded,galvanized steel strip or wire armoured,electric power cables 1100 volts grade with stranded aluminium conductor of size 400 sqmm,3.5 core complete all as specified and directed.
Taking out old unsv existing on load change over switch wall mouted type from existing location sheet steel enclosure any type/rating and incl providing supply and fix on load change over switch 415V in wall mounted sheet metal enclosure/open excution type/side/front handle type as per site requiremet 4 pole of capacity 400 amps and including providing incoming and outgoing cables features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels/on wall mounting fitting complete all as specified and directed.Make- Legrand/Hager/Havells//Legrand.
Taking down old usv item from existing location and including Supply and fixing sheet steel enclosure in CRCA sheet suitable for MCCB100Amps to 160Amps,4pole,415Volts,16/18KA MCCB and including providing necessary nut,bolts and washers and fixed in wall concealed/surface as site conditon complete all as specified and directed.make:-Legrand/ABB/Schneider
Taking down old unsv item from existing location and supply and fix MCCB, 160 Amps,4 pole,415 Volts , 35/36KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand/ABB/Schneider or equivalent
Taking down old unsv item from existing location and supply and fix MCCB, 200 Amps,4 pole,415 Volts , 35 KA microprocessor based release type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand/ABB/Schneider or equivalent
Supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 250A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . Make- Havells/Standard/HPL/Legrand.
Supply and fix ON load change over switch 415V in sheet metal enclosure/open excution type as per site requiremet 4 pole of capacity 250 amps and including providing incoming and outgoing cable features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels complete all as specified and directed.Make- Havells/Standard/HPL/Legrand.
Takig out old unserviceable earthings of any type from existing locations and including providing material and labour for copper earthing complete with copper earth plate elctrode sie 60cm x60cmx 3 mm thick buried directely in ground vertically earth pit not less than 2.25 metres deep below ground level with top edge of plate not less than 1.5 metres below ground level, connected to and including pure copper earth strip of size 20 X 3 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of copper bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I & as per IS-3043 and GI watering pipe of 32 mm dia medium grade,copper funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.
Taking down old unsv item from existing location and material and labour for M& L for galvanized strip iron 25 x4 mm as earthing lead complete all as specified and directed
Taking down old unsv item from existing location and material and labour for M& L for galvanized strip iron 32 x6 mm as earthing lead complete all as specified and directed
Taking down old unsv item from existing location and material and labour for M& L for copper strip 20 x3 mm as earthing lead complete all as specified and directed
Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.
Supply and laying double wall corrugated HDPE pipe 50 mm outer dia for cable protection of UG cable complete all as specified.
Supply and laying double wall corrugated HDPE pipe 63 mm outer dia for cable protection of UG cable complete all as specified.
Supply and laying double wall corrugated HDPE pipe 90 mm outer dia for cable protection of UG cable complete all as specified.
Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.
Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed
Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed
M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.
Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST
Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST
ABC CONSTRUCTION COMPANY (BID ID -3347434)
c p engineering works (BID ID -3346699)
L DURGA GANESH (BID ID -3346581)
M/s MAA BHAIRABI ENTERPRISES (BID ID -3346336)
M/s Jai Sree Hari (BID ID -3346519)
M/s Bapujee Builders and Traders (BID ID -3346782)
JPR CONSTRUCTIONS AND ENGINEERS (BID ID -3346306)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .