WBPWD/EE/PMED/NIQ-24/e-Q /2021-2022

Amount

Supplying and fixing 250A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. Incl. 2nos. Cable end box. (Make- L&T / Siemens)

Supply & delivery of single core 95 sq.mm. 1.1kv grade pvc insulated Unarmoured standared copper cable for interconnection between busbar and main switches [Make:- Gloster/Polycab/ Havells/ KEI]

Laying of 1 core 95 sqmm Unarmoured cable in prelaid 95 mm dia PVC rigid pipe.

Laying of 1 core 95 sqmm Unarmoured cable in surface of the electrical panel with fibre tie with the supporting arrangements.

S & Fixing of 65 mm. Dia Heavy Duty PVC rigid pipe including supply & fixing of PVC rigid bend/ elbow, to be fixed bt necessary shaddles & other arrangement.

Finishing of the 95sq. Mm. PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Delivery of 4 core 150sq mm. 1.1 kv.gr.XLPE insulated armoured Aluminium conductor cable. [Make- Polycab /Havells/Gloster/ KEI]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Laying of 4 core 150 sqmm 1.1Kv grade XLPE insulated Al/A cable through existing GI pipe.

Laying of 4 core 150 sqmm cable on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supply & Fixing of compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

a) 4 core 150 sqmm

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 2+8 way Enclosure, 1no. 40A DP MCB type isolator as incommer & 6-32A SPMCB - 8nos as outgoing (Make- Legrand/ Schneider/ Siemens (8GB32102RC10))

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- policab/ havells/ Finolex/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

a)2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

c) 2 X 36/0.3 (2.5 sqmm) + 1 X 22/0.3 (1.5 sqmm) as ECC

a) 3 x 1.5 sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- policab/ havells/ Finolex/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. (Average run 9 mtr.)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

a)On Board

Fixing of Single / Double LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. with S & F 2x24/0.20 mm flexible copper wire of 1.10 mt. length. incl. 2nos mounting kit.

Supply & Delivery of Single LED tube light fittings incl. all accessrise (Make- Philips, cat no.- TMC 501 P 1xT-LED 22W P3241 incl. 1no. 18W master LED tube 2100 lm PC body/ Crompton/ bajaj.

Supplying & Fixing 230v, 10W LED bulk head light fitting incl. all accessirise on wall/ceiling.( Make- Crompton, Cat no- LBHE-10-CDL/ Bajaj/ Philips)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactoryfinishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

S& Fixing 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod,Canopy,fork etc. and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by3x1.5 sqmm single core stranded pvc insulated unsheathed copper wire. (Make- Orient- Summer breeze/ Crompton- High Speed)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

S&F 250V. 50 Hz. 15" (380 mm.) Sweep Heavy Duty AC Exhaust Fan (As per EPC make) after making hole and mending good the damages to original finish incl. S&F 380mm GI louver shuter.

S & F 240V, 18" (450 mm) sweep metal body metal blade heavy duty wall fan Fixing on wall by S&F or fastner (Make- Orient, model- Tornado Wall-II / EPC)

Supply & Fixing 240 V, 1 nos. 6A, & 1 no. 20A plug socket with separate 1 nos. 6 A & 1 no. 20A Piano key type switch(Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200x150x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by TATA-Medium GI pipe for two panel (Each-2)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F No. 6 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply & fixing of 80mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

M/S JOGMAYA ENTERPRISE

CHANDIMATA TRADERS

MAA TARA ENTERPRISE

M S KAMAL SHAW

ELCON ENGINEERS