Construction of R.I. Office-cum-Residence building at Kanheipur of Khalikote Tahasil in the District of Ganjam.

Earth work in excavation of foundation in hard or gravelly soil with initial lead and lifts including dressing and leveling the bed of the foundation to the required width and required depth including shoring shuttering,propping bullah,pilling,dewatering from foundation supplying and working of pumps including hire & running charges of pumps & all machinaries required for the work & stacking the excavated materials away from the working areas with cess complete as per specification & direction of the Engineer-in-Charge. Ground Floor

Compound Wall

Approach Road

Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty additional charges, DMF 10% & EMF 5% over royalty & taxes of all materials & cost of all labour & T&P required for the work complete (measurement will be taken for compacted section) as per direction of Engineer-in-Charge. Ground Floor

Compound Wall

Approach Road

Providing Cement concrete (1:3:6) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 4cm size hard granite metal of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers not exceeding 15cm thick compacting with proper packing to proper slope & level including watering, curing and cost, conveyance, Cess royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer-in-charge. Ground Floor

Compound Wall

Providing Cement concrete (1:2:4) in foundation upto a required depth below ground level and upto a required height above ground level/bed level using with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with additional charges, DMF 10% & EMF 5% over royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. Ground Floor

Fly Ash brick Masonary in cement morta (1:6) in foundation/superstructure using fly ash brick of 25cmx12cmx8cm size bricks having crushing strength in between 75 kg to 100kg per sq .cm with diamantion tolerance + 8% including splays cutting circular moulding chamfering & corbelling watering and curing for 7days after immersing the bricks in water for six hours before use etc.complete including cost, conveyance, royalties DMF (10% over Royality),EMF(5% over Royality)& Addl.charges & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification direction of the E.I.C. Foundation (Ground Floor & Compound wall)

Super structure Ground Floor

Super structure First Floor

Super structure Head Room

Super structure Compound Wall

RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, DMF (10% over Royality),EMF(5% over Royality)& Addl.charges Cess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) Column Base Footing Ground Floor

Column Super Structure Ground Floor

First Floor

Head Room

Compound Wall

Plinth Band Ground Floor

Lintel Band Ground Floor

First Floor

Head Room

Chajja & Fins Ground Floor

First Floor

Head Room

Beam Ground Floor

First Floor

Head Room

Staircase Ground Floor

First Floor

Roof Slab Ground Floor

First Floor

Head Room

Shelves Ground Floor

First Floor

Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge. Ground Floor

First Floor

Head Room

Compound Wall

Providing 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard broken granite chips with chicken mesh including cost, conveyance, additional charges, DMF 10% & EMF 5% over royalty of all materials taxes of all T&P with cess etc, required for the work etc complete in all respect as directed by Engineer-in-charge. First Floor

Head Room

12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties DMF (10% over Royality),EMF(5% over Royality)& Addl.charges , etc. complete in all respect in all floors as per direction of the Engineer in charge. Ground Floor

First Floor

Head Room

Compound Wall

16mm (5/8") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities royalties DMF (10% over Royality),EMF(5% over Royality)& Addl.charges ,etc completed in all respect in all floors as per direction of the Engineer-in-Charge Ground Floor

First Floor

Head Room

6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work with taxes and royality etc complete in all respects in all floors as per direction of Engineer-in-Charge. Ground Floor

First Floor

Head Room

Supplying,Providing, fitting and fixing of vitrified tile(ivory) in floors of size (600 x 600mm) of approved make confirming to IS:13755 with application of polymer modified quick set cement based water resistant adhesive confirming IS:15477 of 3mm thick bed and filling joints with white cement of approved quality including cost, conveyance, royalties,DMF (10% over Royality),EMF(5% over Royality)& Addl.charges ,taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. Ground Floor

First Floor

Providing and fixing Chequred tiles in floors, treads of on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance,& labour, DMF (10% over Royality),EMF(5% over Royality)& Addl.charges T&P and Cess etc. complete in all respect as per specification and direction of the Engineer-in-charge Ground Floor

First Floor

Providing 20 cm X 30 cm vitrified tile tiles fixing in dadoos skriting and rises of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of pre cast tiles watering & curing for 7 days with cost conveyance royalty and taxes of all materials & labour DMF (10% over Royality),EMF(5% over Royality)& Addl.charges T&P with cess required for the work etc, complete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge. Ground Floor

First Floor

Priming one coat with water bound wall cement primer (outside) any approved primer over finished wall surface of approved primer including cost of primer in all respect with cost, conveyance and taxes of all materials and labour with T&P and CESS required for the work etc. complete as per direction of the Engineer-in-charge. Ground Floor

First Floor

Head Room

Finishing wall surface of walls with cement based wall putty one coat (Water based) of approved make and finished smooth and even surface to receive painting including cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge. Ground Floor

First Floor

Head Room

Distempering two coats with distemper of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. Ground Floor

First Floor

Head Room

Wall painting two coats with weather paint of approved shade on wall surface to give an even shade over a coat of primer including cost of brushes and putty including cost of paint scrapping, cleaing rubbing scaffloding with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge. Ground Floor

First Floor

Head Room

Compound Wall

Providing , fitting & fixing of 32mm thick flush door shutter with approved quantity of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge Ground Floor

First Floor

M.S. Window Grill, made out of M.S. Flat conforming to IS: 2062/2006, painted with Red oxide primer, as per the design approved by the purchaser as per direction of the Engineer-in-charge. Ground Floor

First Floor

Head Room

Compound Wall

Labour for fitting & fixing M.S. Window Grills including cost of screws complete as per direction of the Engineer-in-charge. Ground Floor

First Floor(With Grill)

Head Room

Labour for fitting & fixing doors as per approved design including cost of all materials complete as per direction of the Engineer-in-charge. Ground Floor

Head Room

Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron work and coal taring 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending to sizes where necessary with cost and conveyance royalities and taxes of all materials and labour, CESS with T&P required for the work etc. complete in all respect as per direction of Engineer-In-Charge. Ground Floor

First Floor

Providing fitting and fixing fully glazed aluminium framed openable windows using 15 micron anodized OEL aluminium section 2082 as out section,9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125,aluminium angle,rubber beading,friction stay and handle etc.with 5mm black glass with including cost of materials all labour with T&P & Cess required for the work etc complete as per direction of Engineer-in-Charge. Ground Floor

First Floor

Head Room

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Ground Floor

First Floor

Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including one coat primer and cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge Ground Floor

First Floor

Head Room

Compound Wall

Construction of embankment with approved material obtained from borrow pits transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road and Bridge works (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge. (Payment of earthwork will be made compacted level section) only. Ground Floor

Construction of Granular sub-base by providing Close graded Granular Sub-base Grading-III material as per table-400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess complete as per direction of the Engineer in charge. Ground Floor

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, primer, sealant, near approaches to bridge/culvert or at any approved portion of road and construction joints, admixtures as approved, curing of concrete slabs for 14-days as per MoRD including cost, conveyance, royality, additional charges, DMF 10% & EMF 5% over royalty Cess, taxes & technical specification Clause 1501 and as per direction of Engineer-in-Charge. Approach Road

PH WORK (EXTERNAL) 30 User septic tank Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr 4.36 m x 3.17 m x 1.50 m=20.731 cum

From 1.5 mtr to 3.0 mtr depth 4.36 m x 3.17 m x 0.70 m=9.674 cum

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. 4.36 m x 3.17 m x 0.15 m=2.073 cum

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 4.36 m x 3.17 m x 0.15 m=2.073 cum

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 4.36 m x 3.17 m x 0.10 m=1.382 cum + 3.12 m x 1.93 m x 0.038 m = 0.228 Cum

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. In Foundation and Plinth in C:M (1:4) 2 x ( 4.06 + 1.93 ) m x 0.47 m x 1.10 m = 6.193 cum + 2 x ( 3.82 + 1.93 ) m x 0.35 m x 0.80 m = 3.220 cum

In Foundation and Plinth in C:M (1:6) 1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 12 mm thick C.P in C:M (1:3) 2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm + 3.12 x 1.93 m = 6.021 sqm + 4 x 0.40 x 0.60 m = 0.96 sqm

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Same as above item 20mm C.P in 1:3

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. 2 x (3.82 + 2.63 ) m x 0.125 m =1.612 sqm + 3.12 x 1.93 m = 6.021 sqm

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 3.82 m x 2.63 m x 0.125 m

Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.2.2 m x 0.45 m

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. 2 x ( 4.06 + 2.87 ) m x 1.10 m = 15.246 Sqm + 2 x ( 3.82 + 2.63 ) m x 0.80 m = 10.32 Sqm + 2 x ( 4.06 + 2.63 ) m x 0.125 m = 1.672 Sqm

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC. 250mm thick wall

375mm thick wall

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.

Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) 110mm dia UPVC SWR Pipe

110mm dia U-PVC S. Trap

110mm dia U-PVC P. Trap

110mm U-PVC S/J with Door

110mm U-PVC door bend

110mm dia U-PVC Plain bend

125mm dia CP Grating

110mm U-PVC Plain Tee

110mm U-PVC Cowl

75mm dia U-PVC SWR Pipe

75mm dia U-PVC Plain Tee

75mm U-PVC Door Bend

75mm U-PVC Plain Bend

Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size : 910mm x 910mm x 910mm manhole Chamber

Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap

Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90m dia x 2.00m deep soak way pit

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90m dia x 2.00m deep soak way pit

Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with Haunch top

Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C.160 mm dia PVC gallary

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. Suprem/Ashirbad 15 mm dia C-PVC Pipe( Internal)

25mm dia C-PVC Pipe (External)

Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 1000 lit sintex tank (F Floor)

Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC. 1000 ltr capacity tank F Floor

BORE WELL (200MM X 150 MM DIA) Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)Drilling of 200mm dia bore :-00 mtr to 30.00 mtr

Drilling of 150mm dia bore :-30.01 mtr to 80.00 mtr

Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 200 mm dia PVC pipes :- 00mtr to 30.00 mtr

Cost of 200 mm dia PVC pipes :- 00mtr to 30.30 mtr

Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.

Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.

Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.

Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.

Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC. 32 mm dia HDPE Pipe(Internal Pipe)

PH WORK (INTERNAL) Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor 1x2.10m x 1.50m= 3.15 sqm 1x1.97m x 1.50m= 2.95sqm 1 x1.92m x 1.50m= 2.88 sqm 2 x 0.75m x 0.30m= 0.45 sqm (-) 1 x 0.58m x 0.44m= 0.255

First Floor 1x2.10m x 1.50m= 3.15 sqm 1x1.97m x 1.50m= 2.95sqm 1x 4.20m x 0.60m= 2.52 sqm 2 x 0.75m x 0.30m= 0.45 sqm

Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall 1 x 6.60m x2.10m= 13.86 sqm 1 x 6.34m x 2.10m= 13.31 sqm 1 x 6.24m x 2.10m= 13.10 sqm 1 x 1.92m x 2.10m= 4.032

First Floor Wall 1 x 6.60m x2.10m= 13.86 sqm 1 x 6.34m x 2.10m= 13.31 sqm 1 x4.20m x 1.20m= 5.04 sqm

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Flat back wall urinal

Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100/ 450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580 mm Porcelain Orissa Pan

Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra) Single unit

Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC. 550x400mm WHB-( Paryware/Nycer/ cerra )

Counter top

Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Porcelain Pedestal

Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC. B.E Mirror

Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Ambar make .

CP Towel ring heavy Stainless steel with mousoumi make .

Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality

Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm)

Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. Suprem/Ashirbad 15 mm dia C-PVC Pipe( Internal)

25mm dia C-PVC Pipe (External)

Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap

Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with Haunch top

Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra )

Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. stainless steel kitchen sink(600x 450x200mm)

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 4 x (2.0 m x 0.75 )

Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings ( Jaquar Make) of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia cp bib cock S.B.

15mm dia cp Long body Bib Cock

15mm dia cp Wall Mixture 2 in 1

15mm dia CP Two way bib Cock

15mm dia CP pillar cock

15mm dia cp concealed stop cock

15mm dia cp angle stop cock

15mm dia CP Health Faucet

15mm dia CP flange

15mm dia CP Extension piece

25mm dia Brass Ball Valve

Wiring Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in... Group B

Recessed wiring to Call Bell Point in... Group B

Recessed wiring to Exhaust Fan Point in... Group B

S/F of Angle holder replacing Ceilling Rose (1.29-1.28)

Switch Boards S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers & BDB S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)

S/F of MCB 8 way Double door (2.3.6)

Main switches S/F of Main incoming switch box i) 63A DP MCCB-1 no ii) 63A DP RCCB- 1no iii) 275V,20KA SPD 1no iv) 63A Bus bar

Earthing Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Fittings S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- HS /Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

Fixing /I.T.C. of stepped type Modular regulator (1.25a)

S/F of 400mm Wall fan with all accessories and connections (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Cropmton-WM Hiflowave/ Havells-Accelero HS/ Anchor-Altrix HS- OWH/ Orient-Wall43/ Great White-WYNO WF)

Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 9w Watt LED Bulb

S/F of 900VA/12V Invertor machine with Trolly(Make- Microtek(Super power new 1100)/V-Guard(SMART 1100)/Luminous(ZELIO SMART 1100) and 180Ah tall tubular BatteryMake-Luminous and 16A Delux plug Top with Luminous single Trolley for Invertor Battery

Cables S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire

Please Enable Macros to View BoQ information