REPAIRS TO PATH, HARDSTANDING AND CHAINLINK FENCING OF SARVATRA VIHAR AREA OF AGE B/R-I (CENTRAL) UNDER GE(CENTRAL) KIRKEE.

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Material and labour for plain cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for plain cement concrete, (1:2:4), type B2 using 40mm graded stone aggregate as in fixing fencing post complete all as specified and as directed.

Excavating in trenches, n.exc. 1.5 m wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sq m on plan and getting out, in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance n.exc. 50 mtr and depositing where directed at a level n exc.1.50 mtr above starting point complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled mild steel framed work conforming to Fe-290, Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fix rolled mild steel work as in fencing posts and struts, swan neck in fencing including cutting tops to shape as directed drilling holes notching for wire, flat iron fillets (for securing wire mesh) including all necessary steel bars conforming to Fe-410-0 or FE-310-0 including one shop coat of zinc chromium primer complete all as specified and as directed.

Supply and fix rolled mild steel as in screw bolts, dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc. 5cm and n.exc. 10 cm long complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type as approved, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Dismantling fencing wire mesh, any type and size, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for pre-cast cement concrete solid block masonry with solid blocks of the grade C-1, (1:3:6) using 20mm graded stone aggregate set in CM (1:6) complete all as specified and as directed.

Material and labour for brick work with fly ash modular size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new surfaces (plastered or un-plastered) of walls or RCC Jaffries and applying two coats of cement based paint of approved tint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old plasterd or unplastered surfaces of wall and applying one coat cement based paint of approved tint complete all as specified and directed by Engr-in-Charge. NOTE FOR SL ITEM NO 20 & 21 :- (i) Before applying cement based paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of cracks using crack sealent and cleaning of surface by spray jet. (iv) Application of cement based paint strictly done by spray/mechanical spray machine only, otherwise 30% cost recovery shall be made from the respective item. (iii) Filling of cracks, holes and dents are includes in the quoted rates. (iv) Proper curing with water to be done before and after application of 1st coat.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over one coat of red oxide primer complete all as specified and as directed.

Supply and fix for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. NOTE :- Each line wire to be measured.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing granite or stone slabs of any type and position complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.

Material and labour machine pressed, precast concrete rubber moulded interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments over and including 40mm thick sand cushion of approved design and pattern as approved by GE, complete all as specified and as directed.

Material and labour 75mm thick, plain cement concrete type D-2, (1:4:8), using 40mm graded crushed stone aggregate as in sub base all as specified and as directed by Engr-in-Charge.

Material and labour for plain cement concrete (1:2:4), type B1 using 20mm graded stone aggregate as in kerbs slightly rounded or chamfered angles sides of path complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 300 x 300 x 20mm thick, set, pointed & jointed in neat cement slurry as in floors polished with grey cement and pigments laid over and including 20mm thick cement screed base in CM (1:6) and all as directed by Engr-in-charge.

Material and labour plain cement concrete, (1:2:4), type C2 using 20 mm graded stone aggregate as in floors, plinth protection, 100 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed by Engr-in-Charge.

MANIYA CONSTRUCTION CO

VP DEVELOPERS AND CONTRACTOR

Shri Sant Cosntruction

M/S KISHAN CONSTRUCTION

MAHESH DADAJI BACHHAV

ANIL CONSTRUCTION CO.

S.R.M.K Enterprises

V.R.PRAJAPATI AND CO.