REPAIR AND RECANING OF CHAIRS AND RE UPHOLSTRY OF SOFA SET AT RANCHI UNDER GE RANCHI

Amount

M&L for removing of unserviceable/broken parts of Chair wooden bottom without damaging of other parts of chair wooden bottom, supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-285)

Rear leg of size 835x55x30mm. (FD-285)

Front leg of size 430x55x30mm.(FD-285)

Side/Front/Rear rails of size 445x65x30mm.(FD-285)

Back rest of size 405x50x15mm.(FD-285)

Stiffener of size 20 x 25mm (Side & Central one).(FD-285)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom.(FD-285)

Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins.(FD-285)

Supply and fixing in replacement of seat of size 440 x 445mm x 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with steel screw complete all as specified in drg and as directed.(FD-285) (Make of Plywood:- Archidply(Gold)/ Centuryply (Sainik) / Greenply(Ecotech)/BTSP (Gold)/Samratply)

Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.

Supply & Fix nylon buffers with steel screw to legs of chair wooden bottom complete all as directed. (FD-285)

M& L for Removing of unserviceable/broken parts of Chair dining without damaging to other parts of chair dining and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-279)

Rear leg of size 890x55x30mm. (FD-279)

Front leg of size 460x55x30mm.(FD-279)

Side/Front/Rear rails of size 440x65x30mm.(FD-279)

Back rest of size 405x45x15mm.(FD-279)

Stiffener of size 20x25mm (Side & Central one).(FD-279)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair dining.(FD-279)

Tightening of all parts/joints of whole Chair dining with bamboo pins.(FD-279)

Material and labour for French polishing to chair dining after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.

Removing the old cane from chair dining and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed. (FD-279).

Supply & Fix nylon buffers with steel screw to legs of chair dining complete all as directed. (FD-279)

M&L for removing of unserviceable/broken parts of Chair Writing without damaging of other parts of chair writing and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-280)

Rear leg of size 890x55x30mm.(FD-280)

Front leg of size 680x55x30mm.(FD-280)

Side/Front/Rear rails of size 535 x 65x30mm.(FD-280)

Back rest of size 470x50x15mm.(FD-280)

Stiffener of size 20x25mm (Side & Central one).(FD-280)

Arms of size 520 x 60x25mm.(FD-280)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair Writing.(FD-280)

Tightening of all parts/joints of whole Chair Writing with bamboo pins.(FD-280)

Material and labour for French polishing to chair writing after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.

Removing the old cane from chair writing and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed. (FD-280).

Supply & Fix nylon buffers with steel screw to legs of chair writing complete all as directed. (FD-280)

M&L for removing of unserviceable/broken parts of Chair Easy without damaging of other parts of chair easy and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-229)

Front/Rear leg of size 545x55x25mm.(FD-229)

Front/Rear stiffener of size 510 x 50 x 25mm .(FD-229)

Arms of size 610 x 65x25mm.(FD-229)

Front & back rail of seat/back of size 510x50x25mm.(FD-229)

Side rail of seat/back of size 575 x 70 x 40mm .(FD-229)

Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak/shisham made to shape and size complete all as specified and shown in drg and as directed.(FD-229)

All as per Srl. Item No. 4.06 here-in-before but back frame of chair easy.(FD-229)

Tightening of all parts/joints of entire Chair Easy with bamboo pins. (FD-229)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy.(FD-229)

Material and labour for French polishing to chair easy after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.

Removing the old cane from chair easy and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed. (FD-229).

Supply & Fix nylon buffers with steel screw to legs of chair easy complete all as directed. (FD-229)

Removing of unserviceable/broken parts of Chair dining cushion without damaging of other parts of chair dining cushioned and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD/MAP-II/04)

12mm thick MR Gde Plywood seat with cushion of size 450mm x 450mm with Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM). (FD/MAP-II/04)

Supply and fixing of tapestory cloth in replacement of old cover of chair dining cushioned. (Tapestory cloth shall be not less than Rs.350/- per RM). (FD/MAP-II/04)

Front leg of size 450x50x35mm. (FD/MAP-II/04)

Rear leg of size 950x50x35mm. (FD/MAP-II/04)

Back Vertical stripps of size 550 x 30 x15mm.(FD/MAP-II/04)

Back rest of size 450x45x25mm.(FD/MAP-II/04)

Stiffener of size 25x20mm (Side & Central one).(FD/MAP-II/04)

Side and Front rails of seat of size 450x65x25mm. (FD/MAP-II/04)

Back Rail of seat of size 450x90x25mm. (FD/MAP-II/04)

Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. (FD/MAP-II/04)

Supply and fixing with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining cushioned.(FD/MAP-II/04)

Material and labour for French polishing to chair dining cushion after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish.

Supply & Fix nylon buffers with steel screw to legs of chair dining cushion complete all as directed by Engineer-in-Charge.

M & L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (FD-359 & FD/MAP-II/06)

Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 19mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed. (FD-359 & FD/MAP-II/06)

Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as directed. (FD-359 & FD/MAP-II/06)

M&L for taking down and removing the old cane /PVC seat and back from seat and back of Chair Verandah remove the old paint with emry paper and prepare the surface smooth of chair Verandah. Apply one coat synthetic enamel white paint on whole surface of Chair Verandah. Make - Asian , Burger, Nerolac.

Recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white/off white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed. (FD-359 & FD/MAP-II/06)

Supply & Fix nylon buffers with steel screw to legs of chair Verandah complete all as directed.

Sofa Set 5/4 Seater (FD-258/281/373) M&L for removing of unserviceable/broken parts of Sofa Set (3 seater , 1 seater) without damaging of other parts of Sofa set and supply and fix following new parts made out of 1st class hard wood teak as shown on drg and specified. (FD-258, 281 & 373)

Supply and fixing in replacement of front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg.

All as per item No. 7.01 here-in-before but arms.

All as per item No. 7.02 here-in-before but side rails.

All as per item No. 7.03 here-in-before but front & back rail of single seater sofa.

All as per Srl item No 7.04 here-in-before but front/back rail of sofa three seater (long seat).

Supply and fixing in replacement of back cushion of Sofa Set of drg FD-258 size to made in shape as shown on drg and directed by Engr-in-Charge. The thickness of cushion shall be 50mm thick, 32 density and covered with new tapestory cloth. ( not less than Rs. 400/- per RM). The make of cushion shall be Sleepwell/Kurl-on/Coir-foam/Featherfoam.

Supply & fixing in replacement of 100mm thick flexipuff/U-Foam cushion of 32 density of Make:- Sleepwell/Cor-foam/ Kurl-on/Featherfoam, covered with new tapestory cloth (not less than Rs 400/- per running mtr) complete all as specified and directed

Supply & fixing in replacement of unserviceable sofa set cushion cover with new cushion cover of tapestory cloth as per sample complete all as specified and directed (Taperstory cloth shall not be less than Rs 350/- per RM) .

Material and labour for French polishing to Sofa Set Single seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.

Material and labour for French polishing to Sofa Set Three seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish.

ASSOCIATED BUILDCON LLP (BID ID -3088200)

Raj Construction (BID ID -3089241)

M/s Mukesh and company (BID ID -3084249)

M/s Deepak kumar sinha (BID ID -3085896)

Capital Construction Company (BID ID -3089709)

M/S AJAY KUMAR SINGH (BID ID -3088907)

M/s Ray construction (BID ID -3084844)