Repair and renovation and upto date Maintenance of Bungalow under JE (MS) (HQ Raj Niwas) including Raj Niwas CS Bungalow DC and DGP Bungalow etc. SW_ Conversion of Basement of DC Bungalow into camp office and painting.

Amount

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand)

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).

6 mm thick Cement fiber board as per IS: 14862

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion 11.1.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing in wall lining/ ceiling with Calcium Silicate Board with necessary fixing arrangement and screws etc. complete

12 mm thick

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles above 25 mm and up to 40 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

30 mm thick plain PVC door shutters

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing Single piece-WC (Size 365x655x765 mm) with UF soft close seat cover, hinges, fixing accessories set and accessories set, cistern fittings, S- Trap- 300mm (LYS-WHT-38851S), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required of make Jaquar or equivalent as per the direction of Engineer-in-charge.

Providing and fixing Wall Hung basin with fixing accessories (Code FLS - WHT - 5801) including full pedestal (code FLS - WHT - 5301) of make Jaquar or equivalent of good quality as per the direction of Egnineer-in-charge.

Providing and fixing Single towel rail 600 mm long of make Jaquar (No. AKP - 35711PS) or equivalent of good quality as per the direction of Egnineer-in-charge.

Providing and fixing towel ring round in shape of approved quality and colour of make Jaquar ( No. AQN - 7721) or equivalent.

Providing and fixing bib cock with wall flange of approved quality of make Jaquar ( No. LYR -38037) or equivalent as per the direction of Engineer-in-charge.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet 25.1.1) Sand cast iron S&S as per IS - 3989

Providing and fixing glass shelf 550 mm long of make Jaquar ( No. AQN-7771) or equivalent of good quality as per the direction of Engineer-in-charge.

Providing and fixing Toilet roll Holder (No. AKP-35751P) make Jaquar or its equivalent of good quality as per the direction of Engineer-in-charge.

Providing and fixing Soap Dish Holder of make Jaquar ( No. AKP-35731P) or equivalent of good quality as per the direction of Engineer-in-charge.

Providing and fixing Health Faucet with 8 mm dia, 1.20 meter long flexible tube & wall Hook of make Jaquar or equivalent (Code No.ALD- 573) of good quality as per the direction of Engineer-in-charge.

Providing and fixing Overhead shower of model No. OHS-1999 with shower arm of model no. SHA-477 casted 190 mm long light body round shape for wall mounted shower with flange of make Jaquar or its equivalent of good quality as per the direction of Engineer-in-charge.

100 mm diameter

Providing and fixing two way Bib Cock of approved quality : (make Jaquar CON 041 KN or equivalent) as desired by the Engineer in charge.

Providing and fixing central hole Basin mixer without popup waste system with 450mm long Braided hoses of make Jaquar or equivalent (Code No. CON - 167KNB ) of good quality as per the direction of Engineer-in-charge.

Providing and fixing wall mixer 3 in 1 system with Proivision for both Hand Shower and Overhead shower complete with 115 mm Long Bend pipe connecting legs and wall flange (without hand & Overhead shower) of Make Jaquar or equivalent (Code No. FLR - 5281) of good quality as per the direction of Engineer-in-charge.

Providing and fixing Hand shower 95mm dia Round shape single flow (ABS Body chrome plated with gray face plate) with Rubit Cleaning system of make Jaquar (Code No.HSH-1739) including shower tube of 12 mm dia & 1.5 m long with nuts of make Jaquar (SHA-549D12) & premium wall bracket for hand shower, 35 mm dia & 100 mm long round shape of make Jaquar (SHA-555) of good quality as per the direction of Engineer-in-Charge)

Providing and fixing Tumbler Holder of make Jaquar (AKP-35741P) or equivalent of good quality as per the direction of Engineer-in-Charge.

Providing and fixing Corner glass shelf (with bracket) of make Jaquar ( No. ACN -1173) or equivalent as desired by the Engineer-in-charge.

Providing and fixing Waste coupling 32 mm size half thread with 80 mm heigh of model No. ALD-705 of make Jaquar or equivalent of good quality as per the direction of Engineer-in-Charge.

Providing and fixing Towel rack with lower hanger (Stainless steel) of Model No. AHS-1581 of make Jaquar or its equivalent of good quality as per the direction of Engineer-in-Charge.

Providing and fixing hot & cold lead connector pipe 450mm long Braided hose with two 15 mm nuts & rubber wahsers without nipple of make Jaquar or equivalent (Code No. ALD-805B ) of good quality as per the direction of Engineer-in-charge.

Providing and fixing Angular Stop Cock with wall flange of approved quality of make Jaquar (No. CON - 059 KN) or equivalent as per the direction of Engineer-in-Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal outer dia Pipes

V.S.K.BUILDERS

B M SINGH