Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC P W D YANAM | L1 | Accepted-AOC Work Order Issued | |
| 2 | L2₹11.4 L+₹1.4 L (13.5%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹11.8 L+₹1.7 L (17.0%)Rejected-Finance | L3 | Rejected-Finance Rejected |
Tender Value
₹11.5 L
EMD Value
₹23,044
Closing Date
19 Jun 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Improvements and Urgent Repairs to the BC Boys Hostel, Yanam
2023_PWDC2_12860_1
14/EEY/2023-24
Open Tender
Civil Works
Item Rate
90 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹23,044
7 Jul 2023
12 Jun 2023
20 Jun 2023
12 Jun 2023
19 Jun 2023
12 Jun 2023
Amount
13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm.
13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid.
17.78.1 Providing and fixing CP brass health faucet of approved quality- 15 mm nominal bore
11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand) - 25 mm thick.
16.96 Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate includes the cost of pumpset, pumpset fixing in position and test run etc. complete.
9.120.1 Providing and fixing to existing door frames - 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails . M.S.frame shall have a coat of steel primers of approved make and manufacture M.S.frame covered with 5mm thick heat moulded PVC 'C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall be tapered in 45 drgree angle on either side forming stiles; and 5mm thick , 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail.Top bottom and lock rails shall be provided either side of the panel. 10mm(5mmx 2) thick , 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet bending on inner side , and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C channel using PVC solvent adhesive etc. complete manufactures specification & drawing.
NON-PSR Supplying and fixing of 4 star or above rated wall mountable split type 2.0 ton capacity A.C. unit as per IS 1391(part 2) with following specifications. Material for body for indoor unit:ABS, normal cooling capacity (K.Cal/Hr) 6000, power consumption max (watts) 2700, Min room discharge Air flow (cum/Hr.) 800, Air conditioner shall be suitable for 230 V, 50 Hz operation and capable of performing the function as cooling, air circulating and filtering and conform to IS 10617 part(1)-1983. (Amendment: 1+2 Make: Daikin/ Carrier/ O General.
Basic Code No. 3296 Supplying and fixing of 4KVA Stabilizer to suit for A/C unit complete as directed by the Engineer-in-charge
NON-PSR Labour charges for chipping the spalled and detoriated cover concrete, cracked mortars, etc, using mechanical / manual tools and removing the loose particles and dust until to reach a sound surface and removing the debris and dumping at nominated locations including lead and lift.
NON-PSR Cleaning the reinforcement bars including dismantling the damaged concrete and all dust, including removing all loose scale and corrosion deposits by wire brush and necessary tools and plants including applying a coat of mixture resin and the epoxy hardener (anticorrosive zinc coating) over a cost of Nitozinc primer in the prepared area and reinforcement.
NON-PSR Providing leak proof centering and shutering using 25mm thick plywood for damaged slab/beam to carrying out micro concreting work including sealing the gaps if any with rendero plugging compound and removal of form work.
NON-PSR Applying two coats of DEK GUARD'S aliphatic acrylate compound over a coat of primer of required colour and shade as directed by the Engineer-in-charge.
NON-PSR Providing polimer grano concrete to an average thickness of 50mm mixed with concrete bonding agent additif Nitobond SBR in the proportion of 2-3 liters per bag of cement and graded stone aggregate 10mm and below as per manufacturer specification.
NON-PSR Supplying and application of epoxy bonding agent NITOBOND EP including mixing the base with hardner in the proportion recommended by the manufacturers on the prepared surface at the rate of 2.20 litres per square metre etc, complete all as directed by the Engineer-in-charge.
K Ganeshwara Rao
VBRUSHI
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .