REPAIR TO FLOORING, PLASTERING, TILING AND SANITARY FITTING, PERIODICAL SERVICE AND OTHER MISC WORKS IN SMQ AREA UNDER GE (AF) SRINAGAR

Amount

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified.

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendering / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for non skid ceramic coloured tiles of size 600x600 mm, 7 to 8 mm thick in floors etc laid over screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for non skid ceramic coloured tiles of size 600x600 mm, 7 to 8 mm thick as in skirting etc laid over backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 600 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for Glass dividing strips, 3 mm thick, 38 mm wide, fixed in position complete all as specified.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only integral water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately.

Supply only integral water proofing compound.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surface even & smooth for receiving distemper / paint of any description all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid separately

M&L for Preparation of newly plastered surfaces of walls including pillars, cornices etc and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

Preparation of old decorated surfaces of ceiling and applying two coats of white wash, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 25 above).

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 26 above).

M&L for Lagging to pipes 15 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

S & F in repairs 15 mm size Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs 20 mm size Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F PVC connection 15 mm size, of length 600 mm, with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20 mm bore (Minimum weight 210 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25 mm bore (Minimum weight 455 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair Tubular towel rail Brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower roses with swil joints, 80 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Vitreous china squatting pan, orrisa pattern, of size 580 x 440 mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete / lime concrete bedding for taking out existing broken squat pan, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminium hinging device, brass chromium plated Jet show including all connection complete.

S&F in repair PVC seat cover for EWC colour white including hinges, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc complete.

S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm size Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs 15 mm dia Brass CP central hole basin mixer with 450 mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repair 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repair Stainless steel plate rack made of 0.8 mm thick sheet, including fixing to wall with PVC gutties and screws of suitable sizes, overall size 760 x 910 x 250mm having partitions, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel sink with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. overall size 915 x 460 mm with bowl size 410 x 330 x 160 mm, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel Grating doom 100 mm dia, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel Grating doom 125 mm dia with waste hole, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, PVC flexible waste pipe, 32 mm bore for WHB & sink complete all as specified and directed by Engineer in Charge.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC along with CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair brass spindle with nylon washer to Brass chromium plated bib taps, stop cocks, pillar taps, wall / sink mixer etc, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats.

S&F in repair Stainless steel soap dish fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 25mm Dia Curtain rail, mild steel, chromium plated with fixings brackets, end caps, stops and rollers etc including taking down of existing curtain rail, complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

Fixing only Galvanised, corrugated mild steel sheeting (retrieved vide item No 65) in any position, fixed with J-type bolt and washers in roof covering / walls cladding etc. with grade of zinc coating complete all as specified.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for tightening bolts and closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern, complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Complete removal of existing treatment from Plastered surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed by Engineer-in-charge. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid separately

M&L for Preparation of old decorated surfaces of ceiling, by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of Old decorated surfaces of wall including cleaning brooming down or with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts cleaning oil and greasy spots, trading oil, greasy spots etc and applying one coat of white wash on walls complete all as specified and as directed.

M&L for Preparation of Old decorated surfaces of wall including cleaning brooming down or with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts cleaning oil and greasy spots, trading oil, greasy spots etc and applying two coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old painted steel or steel based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

All as per item No 80 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 79 above shall be reused.

M&L for Preparation of old decorated surfaces of walls, pillars, cornices up to three story building by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of Cement Based paint complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of Exterior emulsion paint complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment from walls surfaces including pillars, cornices etc by scraping down smoke soots, moulds, moss and trading oil and greasy spots etc and applying two coat of Exterior emulsion paint over a coat of primer including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

M&L for rewriting building No by base with one coat black synthetic enamel paint for dia not exc 300 mm and rewriting building Nos letters of figures (Block, Roman, Italic or Indian ) with one coat white synthetic enamel paint complete all as specified & directed. Note:- Height of each letter will 100 mm.

M/S A.R.TANTARY

M/S LUCKY BUILDERS

M/S FAROOQ AND SONS

M/S WANI AND SONS

NAJAR ENTERPRISES

M/S TARIQ AHMAD SHEIKH