Installation of Water Solar Pump at Dangsal Durga Mandir at Sapnikla

1 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete (a)Depth of excavation not exceeding 1,500 mm.

2. Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

3. Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

4. Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

5. Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

6. Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety.

7. Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction ( a ) For works in foundation and upto roof of ground floor/upto 4 m ( i ) Tor steel/Mild Steel II. Other than SAIL/TATA/RINL

8. Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) ( f ) 25 mm to 30 mm shuttering without staging in foundation (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge.

9. Brick work with 1st class bricks in cement mortar (a) In foundation and plinth

10. 125mm. thick Brick work with 1st. class bricks in cement mortar(4:1) in ground floor ( P-16, It.-16.)

11. Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i ) with (6:1) cement mortor. c) 15 mm thick plaster

12. M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above ( @ 16.00 Kg per Sqm. ) (b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete.

13. Supplying 1.5mm thick M.S. sheet fitted and fixed on front faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

14. Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key,stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout aterials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile above 0.09 Sq.m (ii) Other than Coloured decorative including white

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

16. Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (c) Two coats Plastering-Tile work-Neat Cement Punning=

17. Submersible pump (Sanitary Items) with Solar Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (c) For depth upto 150 metre for 40 mm dia. Tube well with top enlargement of 80 mm dia. i ) 80 mm dia boring etc. top enlargement ii ) 40 mm dia boring etc.

18.Supplying high density polythene strainer of approved make with adopter conforming to I.S.12818 specifications. i ) 40 mm dia

19. Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 40 mm dia

20. Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 80 mm dia LM

21. Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] B. 10 Kg / Sq.Cm. (Working Pressure) a ) 32 mm

22. Supplying, fitting and fixing G.I. cap at top (i)100 mm dia

23. Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes i ) 25 mm dia boring etc. ii ) 20 mm dia

24. Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (a) Cast iron (i) 15 mm

25. Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings. (As per ASTM D 2467, Schedule 80) 25 mm dia.

26. Reducing socket 80mm X 40mm dia

27.Supplying 1000 Litre P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

28. Supplying fitting fixing 1HP Submersible Pump with Solar Pump with AC D C Controller etc. approved brand as per EIC. LM

29. Supplying and fitinng fixing, Solar Panel 335 Wp (330*3) of Sunlight infra / Panasonic /TATA/ Liuminous approved Brand (25 Years) LM with GI Structure etc ( MONO CRYSTALLINE ).

30. Supplying fitting fixing of water level controler On-Off Auto Censer Device LM

31. Supplying fitting fixing water proofing 6 mm 2 Core aluminium wire for Submersible Pump RATE TAKEN FROM LM

32. Supply and fitting fixing 4 Nos. Iron Removal Vessel made by TATA / Pantier / WAMAX of FRP 1354 having top opening 2.5" threaded, 2.5"-8 NPSM NECK including 25 NB Top Multiport Valve -1 No. , Riser Pipe 1 No., with Duel media as per necessity (with following materials actvie carbon, Anthracite , gravel, Treated sand,Green Sand, birm siliphose, etc), size 13 inches dia and 54 inch Height., big blue housing set 4’’x20’’ 02 nos with 5 micron polypopylene filter Cartridge., fixed in middle in between of out let pipe of the roof top water tank including all incidental charges and transportation charges.

33. Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

34. Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface With super gloss (hi-gloss) (iv) Two coats (with any shade except white)

35. Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes ( i ) 75 mm. Dia.

36. Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. B) UPVC Fittings: a) Plain Tee ( i ) 75 mm. Dia.

37.Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. c) Bend 87.5 degree (i) 75 mm. Dia.

39. Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) [Page-265; Item-8.07]of PWD Road Schedule of Rate (2015-16)

Total Cost without GST = Add GST @ 18.00% on above =

Total Cost with GST = Add Cess @ 1.00% on above =

Please Enable Macros to View BoQ information