ELECTRICAL WORKS IN ITI AT RANIPET

Amount

Re-Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End

Renewal by Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (For Principal Room)

Renewal by Supply and fixing of 8W Spot Light with high brightness LED fitting on wall or ceiling, with PVC unsheathed leads from terminals to the fitting. (Havels / Equivalent )(For Principal Room)

Renewal by Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd)complete withTW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Renewal by Supply and fixing of LED Twin Fitting 20 W with high brightness LED fitting on wall or ceiling, with PVC unsheathed leads from terminals to the fitting. ( Havells /Equivalent ) (For MMV Work shop)

Renewal by Supply and Fixing of 100W LED Highbay LED IP66 with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips) (For MMV Work shop)

Renewal by Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Renewal by supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm 2.5 mtr down rod with fan clamp with side plates and cross arm of size 450mm (18")(For MMV Work shop)

Renewal by Supply and fixing of 450 mm (16") high speed AC Wall mounting fan complete with clamp set etc. (Havells / Crompton / equivalent) (For MMV Workshop)

Renewal by Supply and fixing of 90W LED Street Light fitting complet with 32mm dia GI pipe (Class B) with 1no 32mm GI bend complete on the existing post/ wall with SMC box with 16A fuse unit with PVC unsheathed copper leads from fuse carrier to the fitting, MS clamps and aluminum painting with including necessary labour (Havels / Philips / Equivalent)

Renewal by Supply and fixing of 3 nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no.16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Renewal by Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (Legrand / Hager make). ( For FF Conference Hall)

Renewal by Supply and fixing of 125A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only(For Painting Trade and Fitter Trade)

Renewal by Supply and fixing of 32A FP MCB enclosure with 32A FPMCB in flush with wall with earth connection.(Legrand / Hager / Equl) (For Electrical Trade -9 Nos, Painting Trade 5 Nos , Welder Trade - 2Nos)

Renewal by Supply and fixing of 63A FP MCB enclosure with 63A FPMCB in flush with wall with earth connection.(Legrand / Hager / Equl) (For Fitter Trade -4 Nos, Welder Trade - 4 Nos)

Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (For Office area -1 No, Electrical & Painting - 1No ,Fitter & Welder -1 No ,FF Corridor -1 No, MMV Workshop -1 No)

Renewal by Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (For Main Building FF Corridor )

Renewal by Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 No 125A 4P MCCB as incoming and 4 Nos 63A 3P MCB as outgoing with suitable cable end box on suitable angle iron frame on wall with Earth connection only. Higher End (For Painting Treade and Fitter Trade )

Renewal by Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection (For UPS)

Renewal by Supply and run of 2 of 4 sq.mm. PVC in sulated SC unsheathed FRLS copper conductorof 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour

Renewal by Supply and run of 4 of 6 sq.mm. PVC in sulated SC unsheathed FRLS copper conductorof 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire with painting of suitable colour

Renewal by Supply and run of 4 of 10 sq.mm. PVC in sulated SC unsheathed FRLS copper conductorof 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour

Renewal by Supply and frxing of brass cable gland for 3 1/2x185 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and clarnping of 3 1/2 x185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.(For Interconnection)

Renewal by Supply and providing cable end termination of 3-1/2x185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and frxing of brass cable gland for 3 1/2x120 sqmm PVC armoured LTUG cable with earth connection.(For Main Panel 200A Panel inter connection)

Renewal by Supply and clarnping of 3 1/2 x120 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Renewal by Supply and providing cable end termination of 3-1/2x120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and frxing of brass cable gland for 3 1/2x35 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and laying of 3 1/2 x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with brick sand and refilling the earth to make good (For Genset 125A panel to Main Switch Fiter New Building , Class Room Building)

Renewal by Supply and clarnping of 3 1/2 x35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Renewal by Supply and providing cable end termination of 3-1/2x35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and frxing of brass cable gland for 3 1/2x70 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and laying of 3 1/2 x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with brick sand and refilling the earth to make good(For Main Panel to painter & Fitter MainSwitch)

Renewal by Supply and clarnping of 3 1/2 x70 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Renewal by Supply and providing cable end termination of 3-1/2x70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Renewal by Supply and fixing of 125A Three phase 500V 4 Pole Change over switch on suitable angle iron frame work with MS cable entry boxes with earth connetion only (For painting Trade & Fitter Trade)

Renewal by Supply and fixing of 2KVAAutomatic invertor with input Voltage 180V-260V and output voltage 200V -230V 50Hz with 2 No 12V 150AH tubulur Battery and testing complete with connection. Capacity System with battery 1 hour back-Up (Make Exide / Luminous / MicroTeh / equ) (For Office and Meeting Hall)

Renewal by Supply and erection of 125 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a)25 x 10mm tinned cu flat for Inter connections (b) 25 x 6mm tinned cu flat for Interconnections and earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection. Interconnection of bus bars : (1)125A TPN switch bus bar for Interconnection 25mmX10mm copper flat, (2)63 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat. supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches.Incoming Switch : (1)125 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (2)63 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break-7Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.

Renewal by Supply and erection of 250 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a)25 x 10mm tinned cu flat for Inter connections (b)25 x 3 mm tinned cu flat for Interconnections and earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection, Interconnection of bus bars : (1)250A TPN switch bus bar for Interconnection 25mmX10mm copper flat. (2)100 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification. The housing accommodate the following switches. Incoming Switch : (1)250 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (2)100A A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break-7 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.

Renewal by Supply and erection of 315 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a) 25 X 12 mm tinned cu. Flat for 3 phase , neutral and (b)1 Nos 25 x 10 mm tinned cu flat for earth connections, (c) 6 Nos 25 x 6mm tinned cu flat for inter connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection, Interconnection of bus bars: (1)315A TPN switch bus bar for Interconnection 25mmX12mm copper flat, (2)250A TPN switch bus bar for Interconnection 25mmX10mm copper flat, (3)125 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat. Supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches. Incoming Switch : (1)315 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (2)250A A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1Nos, (3)125 A TPN outgoing switch disconnector fuse units interior only with HRC fuses double break-6Nos. The mimic panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.

Supply and erection of 40 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 8 stage, (at 0.95 lag), made up of powder coated, 14/16 SWG CRCA sheet steel enclosure with 1 1/2" x 1 1 1/2" x 1/2" AI Frame work with RCC concreting foundation and bolted to masonry pedestal with 400A triple pole MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters. (A)Vr – R phase Line Voltage, (B)Vy – Y phase Line Voltage, (C)Vb – B phase Line Voltage, (D)Ir – R phase Line current, (E)Iy – Y phase line current, (F)Ib – B phase Line Current, (G)KW – Present Kilo Watts, (H)RKVA – Present KVAR Demand, (I)KVA – Present KVA, (j)PF – Present Power Factor, (K)Number of Capacitor bank ON/OFF, (L)Provision to indicate the imbalanced load, Provision to indicate the change in phase Sequence. The APFC Panel Should also with built in protection For high Voltage / Low Voltage cut off, single phase Preventer in current line surge line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel is necessary connection.

Renewal by Supply and fixing of 65mm (2 1/2") GI pipe (Class 'B') of 6 metre length with 300mm X 300mm X 6mm MS base plate duly welded at the bottom with concreting the construction of masonry pedestal with suitable MS box to house the 10A SP MCB two 4way connector on suitable hylem sheet with SMC box and supply and fixing of 1X90W led type street light fitting (Make: Philips / Havells / Equivalent) with 1 meter of 32mm dia GI pipe (Class 'B') and 32 mm dia GI bend on the above post with PVC unsheathed leads with coil earthing and painting of suitable colour.

Renewal by Supply and frxing of brass cable gland for 4 x 16 sqmm PVC armoured LTUG cable with earth connection

Renewal by Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Renewal by Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Renewal by Supply and fixing of 150W LED flood light fiting complete with angle iron frame supports with suitable clamp sets on the existing post / wall with PVC unsheathed copper leads MS camps and aluminium painting.(For Trade ,4.0 Workshop)

Renewal by Supply and fixing of 65mm (2 1/2") GI pipe (Class 'B') of 6 metre length with 300mm X 300mm X 6mm MS base plate duly welded at the bottom with concreting the construction of masonry pedestal with painting of suitable colour.(For CCTV camera)

Renewal by Supply and Installation of 4MP IP bullet Colour Camera ,WDR 3.6 mm Fixed lens. Make:Hikvision/Eq.Model No: DCS-F4714

Renewal by Supply and installation of 32 channel Network Video recorder , H.264/MJPEG dual code decoding upto 200 Mbps incoming bandwidtht support 2 SATA HDDs up to 8 TB . Make : D-link/Eq.

Renewal by Supply and Installation of 8-port poE 2 Gigabit managed switch, which supports

Renewal by Supply and Installation of 6U wall rack, with front glass door with lock and key facilities

Renewal by Supply and Installation of 8TB built in Hard Disc Drive.Make: Seagate/Eq.

Renewal by Supply and laying of CAT6 cable in existing 1” PVC pipe .Make:D-link/Eq.

Renewal by Supply and Installation of 55" inches LED TV with following features:1. USB Input 2.HDMI Port 3.Clear audio+ 4.Motion flow XR 200 5.Full HD 1080 Make:SONY/Eq. Model No:R252F

Supply and fixing of1 KVA UPS

Testing, Programming and commissioning of software for the Cameras, Alignment of Cameras, Naming of Cameras, Setting of NVR, TV Monitor with HDMI cable , Video cable, BNC Connectors and Power adopter for Cameras RF Modulators , I/Os etc.

Renewal by Supply and fixing of 315 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

Renewal by Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

BALAJI (BID ID -1557677)

Sri Ramana Electrical Works (BID ID -1557699)