Special Repair of G.S.R. Doranda having capacity of 3 Lakh Gallon RCC Sump and other allied works at Doranda under D.W.and S Division, Hatia Project, Ranchi.

Dewatering of stagnate water from sump after scour valve for cleaning of sump etc all complete as per direction of E/I 4nosx8.00Hrsof 3H.P. Diesel Pump Set.

Supplying Labour tools &tackles for cleaning filled silt &mud etc in all lift and disposal of spoils up to a lead of 50.00m all complete as per specification and direction of E/I.

Dismantling Old Plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable with all lead . all complete as per direction of E/I.

Providing PCC M-200 in nominal mix of (1:1.5:3) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I

Providing 19mm thick water proofing cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% Cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mmcement punning including curing ,carriage of water with all leads and lifts as per building specification and direction of E/I.

Providing Tor reinforcement of 10mm , 12mm, &16mm dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire , removal of rust, placing with the rods in position all complete as per building specification and direction of E/I 12mm (TMT coil Fe 500)(only valid for SAIL & TATA STEEL. 30% 8mm dia

30% 10mm dia

40% 12mm dia

Ceiling of Overhead Tank & Outer Stac(long wall & short wall) of Tank Providing & Fixing in position 230mm thick factory made expanded polystyrene core (EPS CORE) roof/floor panel made of 3mm dia GI wire mesh with 80mm pitch in both the direction and on both face of panel kept at 120-135 mm gap and connected by zig zag GI Wire of 3mm dia at alternate row by welding at an angle ranging from 60-70 degree. The top face of the panel shall be provided and finished by applying 70-75 mm thick layer of cement concrete 1:1.5:3 (1 cement :1.5 coarse sand: 3 grade stone aggregate.) Fixing operations of Roof/Floor panel shall be completed in all respect as per drawing E/l