Loading…
Loading…
Tender Value
₹54.3 L
EMD Value
₹1.1 L
Closing Date
12 Jun 2026, 2:00 pm7d left
Mr Barkat Khan
BIDA BHIWADI
As per NIT
2026_BIDA_564599_1
ONLINE NIT-04/2026-27 WORK 1
Open Tender
Civil Works
60 days
BIDA BHIWADI
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,770
Yes
CEO BIDA
₹1.1 L
Yes
3 Jun 2026
3 Jun 2026
12 Jun 2026
3 Jun 2026
12 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | - | Cum | 178 | - | BI01010001010000000000000515BI0100001113 |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size). | - | Cum | 3,847 | - | BI01010001010000000000000515BI0100001114 |
| 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:4 ( 1-Cement : 4-Sand). | - | Cum | 3,182 | - | BI01010001010000000000000515BI0100001115 |
| 4 | Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge .
All works upto floor V floor
M20 grade Design Mix by using min 400 Kg of cement per cum of concrete | - | Cum | 6,089 | - | BI01010001010000000000000515BI0100001116 |
| 5 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | - | Kg | 77 | - | BI01010001010000000000000515BI0100001117 |
| 6 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) | - | Cum | 5,196 | - | BI01010001010000000000000515BI0100001118 |
| 7 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . | - | Sqm | 202 | - | BI01010001010000000000000515BI0100001119 |
| 8 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | - | Cum | 4,915 | - | BI01010001010000000000000515BI0100001120 |
| 9 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters, buttresses plinth and string course. | - | Sqm | 289 | - | BI01010001010000000000000515BI0100001121 |
| 10 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | - | kg | 96 | - | BI01010001010000000000000515BI0100001122 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.88 MB
Termsandconditions1.pdf
Tender Documents • 0.23 MB
BOQ_1004852.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid