Repair to Joinery ,plumbing work etc of B/R portion at Madhopur under GE Basoli

Amount

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying one coat primer and two coats of distemper oil emulsion and 3mm thick wall putty including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of primer including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 5 mm thick in cement mortar 1:3 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying three coats of white wash on ceiling including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

Supply and fix for Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet 10mm thick to be fitted in and sealed the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing as per SSR complete all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve/Angle Valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and making good the disturbed surface complete in all respect in cement mortar 1:4 and taking up or down steel water tubing and connection complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

Supply and fix in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed.

Supply and fix in repairs15 mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

Supply and fix in repair CP health faucet ABS body for 15 mm dia pipe with 1.25 mtr long SS branded connection pipe complete all as specified and directed

Material and labour for preparation of old painted steel surfaces of any description not otherwise specified over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

S&F PVC waste pipe suitable for wash basin/kitchen sink/ urinal etc. complete all as specified and directed

Supply and fix sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement mortar 1:4 finished even and fair for receiving tiles including dismantling floor, hearth or wall tiling , cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick Screed bed or bedding layer in cement mortar 1:4 for laying granite floor complete, all as specified and directed.

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

Supply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Supply and fix for pressed steel frames for doors of size 105 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) for filling in the pressed steel door frame/hold fast complete all as specified and directed

Supply and fix for pressed steel frames for doors of size 125 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) for filling in the pressed steel door frame/hold fastcomplete all as specified and directed.

Supply and fix for prelaminated particle board 18/19 mm thickness exterior grade prelaminated one side and other side balancing white lamination as in cup board shutters, frame and shelve complete all as specified and directed.

Supply and fixing for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

Supply and fixing for 35mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

Supply and fixing for Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fix for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane,Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

Supply and fix for Sheet glass 3mm thick frosted glass and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix for 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel complete all as specified and directed.

Supply and fix in repair for Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.

Material and labour for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of complete removal of existing treatment of old surface of wall (plastered or unplastered) and applying two coats of oil bound distemper on walls over 3 mm thick wall care putty for smooth finishing and a coat of primer complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old surfaces plastered/unplastered and applying two coat of cement base paint over a coat of primer, all as specified and directed.

Supply and fix in repair for water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc,making good to floor complete all as specified and directed.

Supply and fix in repair for 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including flush pipe of PVC 32 mm dia complete all as specified and directed.

Supply and fix for Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking up or down old steel tubing and connections, complete all as specified and directed.

Supply and fix for Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking up or down old steel tubing and connections, complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair for Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix in repair for vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix in repair PVC grating 140mm square/round of PTMT complete all as specified and directed.

Supply and fix for PVC(SWR) bends any radius of bore 110 mm complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm including taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 75 mm including taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, complete all as specified and directed.

Supply and fix for PVC(SWR) bends any radius of bore 75 mm complete all as specified and directed.

M&L PCC 1:5:10 type E-2 ( Using 40mm graded crushed stone aggregate ) in sunken floor complete all as specified and directed.

M& L applying water proofing membrane APP (Atactic Polyprobhlene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick sreed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified.

Plain cement concrete 50mm thick 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in padding on roof in two layers with chicken mesh in between the layer , top surface of plain concrete padding shall be finished even & smooth w/o using extra cement complete, all as specified and directed.

M& L for water proofing treatment in sunken portion and applying water proofing treatment on horizontal and vertical surface by applying bitumen primer @.20Kg/Sqm and providing 3 mm thick APP modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm , laid by torch sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane over sunken portion after cleaning the surface by removing dust,dirt etc as per manufacturer instructions including 15mm thick plaster in CM 1:4 complete all as specified.

Supply and fix 50mm dia GI Pipe medium grade pipe in sunken floor with all fitting and fixed complete as sputs including making good the hole complete, all as specified and directed.

S&F Continous Piano hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm.complete all as specified and directed..

Supply and fix 100 mm long butt hinge extruded aluminium alloy anodised complete all as specified and directed.

Supply and fix in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed .

Supply and fix in repair for 110mm bore PVC (SWR) 'P' trap including jointing with solvent cement complete i all as specified and directed.

Supply and fix in repair for 110mm bore PVC (SWR) vent cowl complete i all as specified and directed.

Supply and fix in repair for 75mm bore PVC (SWR) vent cowl complete i all as specified and directed.

Supply and fix in repairs basin mixer chromium plated mixer for mixing Hot and cold water screwed down for iron pipe and fixed with 15mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve chromium plated long shank concealed type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix Gun metal gate valve for 15mm bore of pipe with iron wheel head, screwed both ends complete all as specified and directed.

Supply and fix in repairs15 mm bore wall mixer, brass chromium plated, screwed down high pressure for mixing Hot and cold water complete all as specified and directed.

Supply and fix sheet glass shelf assembly 5.5mm thick and 120mm wide, sheet glass with chromium plated bracket, guard and railing 6mm long fixed to wall with OVC plug and screw complete all as specified and directed.

Supply and fix in repair chromium plated soap dish fixed to plug with chromium plated brass screws complete all as specified and directed.

Supply and fix Stainless steel kitchen plate rack.of size 600 x 600 x 230mm deep with spoon holder ,shelves fix to wall with suitable screws ,washer,nut bolts and necessary drilling etc including making good to disturbed portion in cement mortar 1:4 to wall complete all as specified and directed.

Ms Narinder Kumar Sehgal

BALKRISHAN GUPTA AND SONS

R K Builders

M/s. Jaswant Singh Govt Contractor

Ashoka Engineers

HARI OM ENTERPRISES