PROVN OF TRG SHED AT ALFA FIRING RANGE AT MLIRC UNDER GE BELAGAVI.

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in Soft/Loose soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) as in foundation filling and mass concrete etc complete all as specified and as directed.

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in cement concrete in surface channel and drain including necessary steel formwork complete all as specified and as directed.

Material and labour for Providing plain Cement Concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary steel form work complete all as specified and as directed.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc. complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone stone aggregate) as in sub-base of floor, 100mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor finish, 50 mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Forming 12mm thick expansion joints filled with pre-formed bituminuous filler and top 30mm primed and sealed with ceiling compound grade 'A' for 100mm thick concrete floor etc complete all as specifed and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished over and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Material and labour for Providing Reinforced cement concrete Design Mix M 25 Grade (using 20mm graded stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.

Material and labour for Providing Reinforced cement concrete Design Mix M 25 Grade (using 20mm graded stone aggregate ) as in beams, cantilevers. Bressummers, lintels over 1.5 m span etc, complete all as specified and as directed

Material and labour for Providing Reinforced cement concrete Design Mix M 25 Grade (using 20mm graded stone aggregate )as in columns, pillars, piers, posts and struts etc, complete all as specified and as directed

Material and labour for Steel formwork to sides of rough finished flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Steel formwork to sides of rough finished flat concrete formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Material and labour for Steel formwork to sides and soffits of rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and as directed.

Material and labour for Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410 -W (Gde E- 250) quality A etc, complete all as specified and as directed.

Material and labour for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc, Fe 410 -W (Gde E- 250) quality A etc, complete all as specified and as directed.

Supply and fix Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc confirming to Fe-290-Gde E-165 complete all as specified and as directed.

Supply and fix 5 mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 complete all as specified and as directed.

Supply and fix Mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exceeding 10 cm but not exceeding 15 cm complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge,valley gutter fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron)/Llyod

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry of concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral waterproofing compound Note :Make :Impermo/Roff/Cico

Material and labour for 15 mm thick Rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finish the surfaces even and fair complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry or concrete surfaces finish the surface even and smooth without using extra cement complete all as directed.

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etccomplete all as specified and as directed.

Material and labour for Preparation of new or previously untreated surfaces of any description and applying two coats of cement base paint over one coat of primer on plastered surfaces of walls complete all as specified and as directed

Supply and fix Aluminium composit panel board 4mm thick for cladding/bush board with aluminium frame work of size 35mmx25mmx 2mm thick aluminium section with necesary fitting and scaffolding etc, complete all as specified and as directed. Note: (i) Measurement shall be taken flat as fixed without any allowance for laps, etc.(ii) Makeof Aluminium composit panel : Alstrong/ Aludecor/ Alucobond (iii) Make of Aluminium section Jindal/Hindalco/Indal

Supply and fix PVC (SWR) eaves gutter trapezoidal profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)NOTE: (i)The contractor shall arrange necessary scaffolding/ shoring and other safety measures to be undertaken during the execution of work. (ii) The rate quoted by the contractor for the above item shall be inclusive of the above provisions.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in any type of soil and getting out for foundation, laying of pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. complete all as specified and as directed.

Supply, fixing, laying and jointing in repair Galvanised iron water tubes 'medium grade' of size 20mm bore dia. with and including all GI fittings such as flanges, unions, reducer socket reducing bends, elbows, tee, check nuts, caps, plugs etc. and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and as directed . Note :Make of GI Tube :TATA/JINDAL/PRAKASH SURYA(ISI MARKED)

Supply and fix in repairs Gun metal gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed . Note :Make of gun metal gate valve :Leader/Kartar/Zoloto.(ISI MARKED)

Material and labour for Rotational moulded Poly-ethylene Water storage tanks (cylindrical vertical with closed top) double layered, hoisted and fixed in position all as specified in SSR Part-I of 1000 litres capacity complete all as specified and as directed. Note :Make of water tank :Sintex/Infra/Polycon (ISI MARKED)

Supply and fix in repairs 20mm bore dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Note:Make :Prayag/M/S Shakthi Industries

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral drawn through in and including PVC casing capping of suitable size with all necessary fittings and provision of one run of Green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including pressed steel terminal boxes (for mounting switches / sockets /regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked for one light point controled by one 1 way switch, complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per item No. 46 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 46 here in before but for one 06 Amps socket outlet on the same board with other switches.

Description all as per item No. 46 here in before but for one 3 pin socket outlet, for independent socket 5 Amps point using 2.50 sqmm cable

Description all as per item No 46 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 4.0 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 4.0 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Energy saving decorating box type batten light fitting 230 volts surface mounted complete with high effeciency glare free light LED lamp 20 watt blue coloured end caps with all accessories, pre- wired, including providing flexible copper wire twin core cable complete all as specified and as directed . Make :- Havells cat part No batten LHEXBXPNIN1W020 HSN code 9405 or equivalent in Crompton/Philips /Wipro

Suply and fix Lamp holder angular PVC polycrbonate type with back plate suitable for PVC casing capping/conduit fittingcomplete all as specified and as directed . Make :- Anchor/Plaza/Crabtree

Supply and fix LED bulb 9 watt with lumen 850 complete all as specified and as directed. Make :- Havell Cat Part No LHLDEUEEMC8R009 /Philips Crompton, Wipro

Supply and fix Socket outlet 6 Amps , 5 pin multipurpose , flush type complete all as specified and as directed. Make : Anchor /Legrand/Indo Asian

Supply and fix in repairs Socket outlet 2 in 1, 3 pin 5 and 15 Amps , flush type multipurpose complete all as specified and as directed. Make : Anchor /Legrand/Indo Asian

Supply and fix Switch piano flush type single pole one way 5/6 amp complete all as specified and as directed.. Make : Anchor /Legrand/Indo Asian

Supply and fix Switch piano flush type single pole one way (multi pin) 16 amp complete all as specified and as directed.. Make : Anchor /Legrand/Indo Asian

Supply and fix PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Supply and fix Sheet metal enclosure for SPN DBs with double door for incorporating MCBs IP 43 protection , 4 way with 200 amp rated busbar, 240 volts as per IS 8623, DBs complete all as specified and as directed. Make :- Legrand /L&T/Havells

Supply and fix MCB SPN 32 Amps 10 KA 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and directed.Make :- Legrand /L&T/Havells

Supply and fix MCB SP 6 to 16 Amps 10 KA 'C' curve 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and directed.Make :- Legrand /L&T/Havells

Material and labour for Earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.50 Mtr below ground level. The earth plate to be connetced with earth lead of 4 mm dia galvanised iron or steel wire all as shown in para no 4 the earthing test point all as specified and directd.The GI earthing strip to be protected by galvanised iron pipe 40 mm bore (medium grade) up to ground level and there after with 40mm dia HDPE pipe up to test point. Earthing shall be include with providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth plate further filled with 60 cm thick Tibba sand and 2nd layer with 30 cm of Magnesium sulphate powder (compact thickness ) , 3rd layer with tibba sand up to the ground level. Earthing shall also be include for providing concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 3.5 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth in any type of soil for cable trenches for laying of cable / pipes etc.and getting out in hard / dense soil including taking out old bricks complete all as specified and as directed. Note:- (I)Old unservicable bricks shall be issued to contractor under Sch of credit. (II) Exsisting sand cushioning for cable shall not be removed. (iii) Serviceable bricks stacked for reuse.

Material and labour for Sand cushioning using dry clean sand (Tibba Sand) for protection of underground cable, consolidated and compacted complete all as specified and as directed.

Material and labour for well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.

Material and labour for Steel tubular swaged poles complete with mild iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 of 11.0 metres long ercted in position and painting 2 coats with aluminium paint over a coat of primer complete all as specified and as directed. Note (i) Make of Steel Pole : Singh Profile , Pune /India Electric Poles Mfg Co ,Maharastra /Bombay Tubes/Kalinga Tubes (ii) Excavation, earthwork, foundation concrete and coping shall be measured and paid separately under relevant items in this BOQ.

Supply and fix in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.Note : Make : Havellscat part no LHETACU7IA7J035 - Endura Sundown 35W OR equivalent in CG/Philips

M/S SAMARTH CONSTRUCTIONS

M/s. N D KALING

SHRI.H.R.PATIL

M/s. KIRAN M CHOUGULE

N K CONSTRUCTION

ASHOK M RAJGOLKAR

M/S MAHADEV M PATIL