PROVN OF WHITE PHOSPHOROUS WP AMN SHED AT UNIT MAGAZINE OF 7 MAHAR AND OTHER SANCTION WORK UNDER GE WEST FEROZEPUR CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, exc 1.5m deep but n exc 3.00 mtr and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & direcetd.

M&L or Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified and directed

M & L sand filling under floors or in foundations including watering and consolidation complete all as directed by Engieer-in-charge .

Removing excavated material n exc. 50 mtr and deposting where directed at a level n exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for broken bricks hardcore of gauge n exc 63 mm, depoisted, spread and levelled in layeers e exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L PCC 1:4:8 (Type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping , bed concrete to drains and all other similar works including necessary formwork complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded stone aggregate) as in precast cover slab fixed in position , tie between two brick walls and all other similar works set in CM 1:4 including necessary form work complete all as directed.

M&L for reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5 graded aggregate) as in foundatios,including rafts,footings,foundation beams,bases for coulmns etc and all other similar works complete all as specified and directed.

M&L for reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) for walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and all other similar works complete all as specified and directed.

M&L for reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed.

M & L RCC (nominal mix) 1:1½ :3 type A-I (20mm graded aggt) as in beams /Lintels etc complete all as directed.

Ditto all as per Item No 18 above but in coulmns,pillars,piers, oosts and struts.

Supply only liquid water proofing compound.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including necessary formwork

M&L for formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

Use and waste of formwork to to rough finished curved surfaces faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

Use and waste of formwork to to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

Use and waste of formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat.

M&L for formwork to rough finished concrete surfaces of sides of square, rectangular or polygonal pillars posts, struts, piers, coulmns and stanchions complete all as specified and directed.

Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). Make: Rajshri or equivalent as approved.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.

S&F aluminium ,anodized 150 mm long barrel tower bolts of extruded section,

S&F Aluminium butt hinge, 75mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified.

M & L for aluminium handles cast type anodised 150 mm long complete all as specified.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F for cast iron work grade FG 150, unmachined, articles exc 5 kg each, in brackets , gully traps , gratings, railing, frames, manhole covers,fire and soot doors, dampers, soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

M&L for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

M & L TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for hard drawn steel wire fabric n exc 4.00 kg weight per sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any hieght complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed.

Material and labour fancy designed 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2,1:4:8(40 mm graded aggregate) as in sub base to flooring and all other similar works complete all as specified and directed.

M & L 100mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) in sub base.

M&L for 75 mm thick cement concrete type B-1, 1:2:4(20 mm graded aggregate) as in plinth protection and all other similar works complete all as specified and directed.

M&L for 38mm width plastic dividing strips, 1.5 mm thick inserted in position to conform to design.

M&L coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, zinc chrome primer complete all as specified

S & F steel water tubes, 15mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors.

S & F steel water tube 20mm dia mtr, med grade galvanized with all fittings and fixed to walls and ceiling or laid in trenches.

S/F Rotational moulded polyethylene water storage tanks (cylindrical,vertical with closed top) hoisted and fixed in position all as specified inSSR Part I , capacity of tank 1000 litres

S&F 15mm bore pillar taps chromium plated cast copper allow fancy type with screwed shancks and fixed complete all as specified and as directed.

S&F cast copper alloy chromium plated fancy type stop valve concealed type of 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified.

S&F Gun metal globe or gate valve with iron wheel head , screwed both ends for iron pipe and fixed,bore dia of pipe 20 mm , fixed in repairs

S & F PVC connection 15 mm size with PTMT nuts 600 mm long complete all as specified

S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F PVC (SWR) 110mm dia mtr bends any radius

M&L for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

M & L cement concrete 1:4:8 type D2 as in bed to drain pipes including packing under 6and haunching against the sides of pipes after they are laid & tested for 150 mm bore pipe

M & L 150 mm dia salt glazed stoneware drain pipes laid in trenches and jointed as specified

S&F PVC Soap dish of approved maike complete all as speciified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M&L for machine cut kota stone in risers of steps,skirting and dado 20-25 mm thick over cement plaster 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M&L for granite (of any colour) 20mm thick machine cut,in skirting/dado laid over cement plaster backing coat in cement mortar 1:4 , 10 mm thick and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in gate pillars and all other similar works complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and foot path etc. finished even and fair without using extra cement including necessary form work of edge all as specified and directed. Note:- 10mm wide and 75mm deep joints shall be made at 3 mtr interval and at each corner the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) finished even and smooth without using extra cement as in hard standings and all other similar works complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm th set and jonnted in cement slurry and pointed in white or colour X 7 mm th set and jonnted in cement slurry and pointed in white or colour cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M/L Non skid ceramic coloured tiles 7-8 mm th (square or rectangular)area of eacch tile exc 0.06 SM but not exc 0.11 SM in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M/L rendering 15mm thick in CM 1:6 finished even and fair without using extra cement.

M & L rendering 10 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L 10 mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement.

M&L Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work and finished the surface even & smooth (without using extra cement) etc. complete all as directed.

Material and labour rendering 20mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction including all necessary scafolding arrangments of any hieght and as specified. Make:Pidilite/Sika for WPC Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of water based primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

M&L for preparing new surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M & L preparation of new plastered surface and applying three coats of white wash on ceiling

M&L cast copper alloy chromium plated fancy type Bib taps, with crutch or butterfly,handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

M&L Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed in repairs, complete all as specified.

S&F in repair Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc complete all as specified.

M&L for chromium plated Shower rose,with or without swivel joints any size including fixing to steel pipe or union 15 mm dia.

S&F wash basin vitreous china white flat black size 550x400mm including brackets complete and waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)

M&L for preparing New surfaces of walls/ceilings by and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and scaffolding where required at any hieght for external painting complete all as specifeid

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and sketch fittings etc) and new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light point/fan point controlled by one single pole one way switch. Make : Havells/Polycab/Anchor/Finolex/Indo asian

S & F Switch piano flush type 5 amps, single pole one way duly ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting including LED lamp 12 Watt complete all as specified. Make : Anchor/Plaza//Havells/Legrand

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LCTL-18-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

S & F LED Security light fitting 1 X 30 watts with bracket (for housing security light fittings) made of GI pipe 25 mm dia light grade 0.6 mtr size duly cutted and welded at an angle of 120 degree and fixed to wall with suitable MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed. Cat Part No LSTS-30-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

S & F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs fitted ACRYLIC window 240 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wal and making good to distrubed surface and colour matching complete all as specified. Make : Havells/Polycab/Anchor/Finolex/Indo asian

S & F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified. Make : Havells/Polycab/Anchor/Finolex/Indo asian

S & F MCB single pole 240 volts, 40 Amps, 10 KA braking capacity complete all as specified. Make : Havells/Polycab/Anchor/Finolex/Indo asian

Suplying and fixing 1100 volts grade heavy duty 10 Sq mm two core cable PVC insulated aluminium conductor, served with inner shething of PVC sheeathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular Make : Havells/Polycab/Anchor/Finolex/Indo asian

S&Fexhaust fans AC single phase 230V, of size 380 mm sweep with louver complete all as specified and directed. Make : Havells/Crompton/Bajaj

manoj and company

shivam builders

M/S Yashpaul Gulati

MS CHARANJIT SACHDEVA

M/s Surjit Singh and bros

M/s Bansi Lal