Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.5 LAccepted-AOC 60 310A 3 KHERIA MOD JAGNER ROAD AGRA 01 | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Due to l-1 and credit | |
| 2 | 2₹27.8 L+₹66,658 (2.46%)Rejected-Finance 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹37.7 L+₹10.6 L (39.0%)Rejected-Finance HNO 52B LAXMI PLACE PHASE II DEORI ROAD NEAR MOHANDEV SCHOOL UKHARA ROAD AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | 3 | Rejected-Finance Being other than L-1 |
Tender Value
₹41.1 L
EMD Value
₹82,300
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) ADM AREA AGRA
GE (AF) Adm Area Agra UP 282008
ADDN/ALTN/IMPROVEMENT TO CERTAIN OMQs UNDER GE (AF) ADM AREA AT AF STN AGRA. (RECALL)
2024_MES_646729_2
8000-2124/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) ADM AREA AGRA
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE (AF) ADM AREA AGRA
₹82,300
Yes
7 Oct 2024
19 Jul 2024
6 Sept 2024
19 Jul 2024
4 Sept 2024
26 Jul 2024
Amount
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) on vertical surface such as skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:3 and complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for glazed ceramic designer coloured tiles of size 450 x 300 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on brick wall finished rough to fix tiles complete all as specified and directed.
M&L for pre-polished machine cut kota stone 20 to 25 mm thick as in steps of stair case, etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including screed bed 20 mm thick in cement mortar 1:6 finished rough to fix stone complete all as specified and directed. Note :- Single peice of stone to be fixed on each tread with nosing on one face.
M&L for pre-polished machine cut kota stone 20 to 25 mm thick as in riser of stair case, etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix stone complete all as specified and directed. Note :- Single peice of stone to be fixed on each riser
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for rendering 15 mm thick in two layers of 10+5 mm in CM 1:4 mixed with Pidi Proof 101 LW(+) of Dr fixit or equivalant intergral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equilvalant in the ratio (1:4:7), (one part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture /Sqm in two coats and finish the surface even and smooth (without using extra cement) for external walls complete all as specified and directed. Note:- Pidi proof and super latex to be measured and paid separately as supply only.
M& L for rendering 15 mm thick in two layers of 10 + 5 mm in CM 1:6 mixed with Pidi Proof 101 LW(+) of Dr fixit (Pidilite) or equivalant intergral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equuilvalant in the ratio (1:4:7), (one part super latex, 4 part water and 7 parts of cement) @ 1.5 Kg of homogenious mixture /Sqm in two coats and finish the surface even and smooth (without using extra cement) for internal walls complete all as specified and directed. Note:- Pidi proof and super latex to be measured and paid separately as supply only.
Supply only Pidi proof 101 LW (+) of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
Supply only super latex 302 of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
M&L for rendering 10 mm thick on concrete surfaces of ceiling with CM (1:3) and finished fair and even complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M&L for preparation of new surface of wall and applying wall care putty minimum 1 mm thick, a coat primer and two coats of oil bound distemper over a coat of clear cholle primer complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying two coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment on walls including scraping where ever required and applying a layer of wall putty base minimum 1 mm thick on scraped surfaced and applying two coat of distemper oil emulsion complete all as specified and directed.
M&L for complete removal of existing treatment on walls including scraping where ever required complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly prepared surface of brick (plastered or unplastered surface) or concrete surface complete all as specified. Note :- (i) Primer and emulsion to be carried out through air less spray machine (mechanial means). (ii) Second coat will be applied after first coat is completely dried i.e approximately 6-8 Hrs after applying of first coat.
Dismantling of existing roof treatment of any thickness including tar felt, mud, cement plaster, leaping plaster etc. from roof surfaces, cutting tree roots/ vegitation growth including cleaning of surface and removing debris upto 500 m outside the MOD land complete all as specified and directed.
M&L for screed bed or rendering 10 mm thick in averaging on RCC roof slab/parapet in cement mortar 1:4 mixed with and including integral water proofing comound @ 2 % by wt of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) as in levelling / maintaining slope over roof slab or terrace and roof kerbs or mud stops mixed with and including liquid water proofing compound @ 200 ml per bag of cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for cleaning of existing surface and applying water proofing treatment to roof slab including vertical surface with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gm / sqm ) applied over a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be sealed by torch application. The overlaps shall be minimum 15 mm on end lap and 100 mm side lap complete all as specified & directed. Note : (i) Treatment shall be done through authorised representative of manufacturer.
M&L for 20 mm thick PCC tiles machine pressed factory made of size 300 mm x 300 mm as per IS-1237-1980 laid over and including 20 mm thick screed in cement mortar 1:4 mixed with and including water proofing compound @ 3 % by weight of cement and tile joints filled with polymer based cement proof joint filler manufactured by approved company including dismantling of tiles complete all as specified and directed. (Rate of Water proofing compound and joint filler shall deemed to be included under this item).
M&L for cutting grooves in brick wall/ parapet wall, 75mm wide and 65mm deep and shaping horizontal face of groove for inserting APP membrane and sealed with cement mortar 1:3 complete all as specified and directed.
Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick cement concrete type C1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
S&F in repair sink with draining board made of stainless steel 1mm thick with plugs, washers, waste pipe and coupling overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair sink without draining board made of stainless steel 1mm thick with plugs, washers, waste pipe and coupling overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F PVC semi rigid waste pipe 32/40 mm dia with socket minimum 700 mm long for WHB/ sink/ urinal complete all as specified and directed.
S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup , screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .
S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F in repair Viterous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with 1.25 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair toilet paper holder, vitreous China, white box type fixed to wall with chromium plated brass screws complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including one number 15 mm bore pillar taps, brass, fancy type, chromium plated, 32mm dia PTMT waste coupling, waste pipe and 600 mm long, PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.
S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F in repair chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.
S&F in repair stainless steel grating doom with or without hole 100mm dia complete all as specified and as directed.
S&F in repair 15 mm dia chromium plated brass wall mixture for mixing hot and cold water sutable for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair soap dish, vitreous china coloured, approximate size 160 x 160 x 90 mm fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed.
S&F in repair PTMT towel ring with bracket, round shape, fancy type, fixed to wall with PVC gully and CP brass screws (min wt 90 Gms) complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F 1 mm thick stainless steel plate rack over all size 750 x 600 x 250 mm of standard pattern and make as approved by GE complete all as directed.
S&F sheet glass corner glass shelf 3 tier assembly consisting of 5.5 mm thick toughen glass 20 mm average radius shelf with chromium plated bracket guard and railing and fixed with CP screws complete all as specified and directed.
S&F in repair pillar taps, cast copper alloy with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm dia chromium plated brass central hole wash basin mixer swan neck type with accessories fixed in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelaminated PVC sheet & edges painted to match with prelaminated sheet and fixed with screws and rawl plugs complete all as specified and directed.
S&F factory made PVC door frame of the size 50mm x 95mm with a wall thickness of 5mm (+ 0.5mm) made out of extruded 5mm (+ 0.5mm) prelam PVC foam sheet of any colour density 600Kg/cbm manufactured by an ISO-9000 certified company, mitre cut at two corners and joined with PVC welding. The two verticals door frames are to be reinforced with 19mm MS tube of 19 gauge throughout the frame, the doorn frame shall be fixed to the wall using 75/100mm long MS screws through the frame by using PVC fasteners. A minium of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.
S&F factory made UPVC (Rigid) cupboard and kitchen cabinet door frame of the size 75mm x 40mm with a wall thickness of 5mm (+ 0.5mm) made out of extruded UPVC (Rigid) sheet of density 600Kg/ cbm manufactured by an ISO-9000 certified company, reinforced with 15mm x 15mm MS squre tube of 19 gauge through out the frame, mitre cut at two corners and joined with 2 Nos of 150mm long brackets of 10mm x 10mm squre tubes. The door frames shall be fixed to the wall using 65/100mm long MS screws through the frame by using UPVC (Rigid) fasteners. A minium of 4 Nos of screws to be provided for each vertical member and minium 2 Nos for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.
S&F 30mm thick factory made moulded solid panel prelam PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 40mm x 20mm for stiles, top lock and bottom rails MS frame shall be covered by heat moulded PVC 'C' Channel of size 30 x 100mm forming styles and 5mm thick prelam 125mm wide PVC sheet for top, lock rail and bottom rail on either side of panel. Paneling of 10mm prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with 30mm wide x 5mm thick prelam PVC sheet beading on either side. An additional 5mm thick prekam PVC sheet strip of 20mm width is to be struck on the interior side of 'C' Channel usinjg PVC cement solvent as per specification & drawing complete all as specified and directed.
S&F factory made UPVC shelf / partition of required size, consisting of panel of 18mm (+ 0.70mm ) thick celuka PVC ply and for supportingthe hold of shelf / partition and shall provided 3 edges in size 18mm x 18mm as per required length. The front side of the edge vigible in the front of the shelf / partition to be edge lipped by 18mm x 1mm PVC sheet of density 600 kg / cbm manufactured by an ISO-9000 certified co., using solvent cement etc complete all as specified and directed.
S&F factory made UPVC shutter 25 mm thick complete all as specified and directed.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed.
M & L for powder coated (any colour) anodized aluminium (sliding type) windows with three track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (02 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F in position powder coated (any colour and thickness of coating not less than 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 -100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.
S&F 5 mm thick figured glass ordinary quality and fixing with oil putty or rubber/ wooden/ aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F alumunium handle, cast type, anodised 150 mm long ISI marked complete all as specified and directed.
S&F alumunium handle, cast type, anodised 125 mm long ISI marked complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
M&L for brass Locks for cupboard, of grade-I, size 65 mm, 2 levers complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed.
S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F PVC (SWR) bend 110 mm dia, any radius complete all as required and as directed.
S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified
S&F in repair cast iron sand cast soil, waste and vent pipe 100 mm bore in any length with or with out ears with cement joints laid in trenches or in floor including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed.
S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints fixed to wall complete all as specified
S&F in repair cast iron sand cast soil, waste and vent pipe 75 mm bore in any length with or with out ears with cement joints laid in trenches or in floor including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed.
S&F 100 mm bore CI bend (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.
S&F 75 mm bore CI bend (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.
S&F CI vent cowl 100 mm bore fixed with cement joint complete all as specified and directed.
S&F CI vent cowl 75 mm bore fixed with cement joint complete all as specified and directed.
S&F cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches with oval access door suitable for 100 mm bore pipe complete all as specified and directed.
S&F cast iron branch pieces single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches with oval access door suitable for 75 mm bore pipe complete all as specified and directed.
S&F in repair cast iron floor trap, 75 mm bore with stainless steel grating including jointing to waste pipes and fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.
S&F in repair Stack clamps for 100/75 mm bore pipe made out of 50 mm x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&F of MS angle iron bracket (design as directed) for AC frame,door/windows chajja frame work with 04 nos MS fasteners of 16mm dia and 100 mm long including MS rivets (for one set) drilling holes and making good fixed anchoring inside wall and top of roof complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wooden surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for manholes etc.), shelves etc. and similar works set in cement mortar 1:6 complete all as specified and directed.
M&L for water proofing treatment to sunken portion including vertical surface of bathroom/ toilets/kitchen with APP based polymeric membrane with following procedure:- (a) Cleaning and washing of existing surface properly with wire brushes. (b) Applying a coat of bituminous primer @ 0.30 ltrs/Sqm on plastered surface (c) Applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm (d) Laying APP based polymeric membrane 3 mm thick (min.) and standard weight not less than 3.00 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gm / sqm) and joints sealed by torch application. The overlaps shall be minimum 15 mm on end lap and 100 mm side lap complete all as specified & directed. Note : (i) Treatment shall be done through authorised representative of manufacturer.
M&L for PCC 1:5:10 type E-2( using 40 mm graded stone aggregate) as in filling in sunken floor of toilet and bath room etc. complete all as specified & directed.
S&F in repair 25 mm dia stainless steel CP curtain rod, having wall thickness not less than 1.20 mm with and including side brackets of SS CP grade 304 and SS CP end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.
M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.
All as per item No. 110 above but for One bell/ buzzer point on an independent board controlled by one bell push
All as per item No. 110 above but for one 5 pin 5 Amp socket outlet point on the independent board
All as per item No. 110 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 110 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.
M&L for point wiring complete with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.
Supply and laying non metalic PVC conduit 20 mm bore ISI Marked medium grade totally concealed for routing wire for TV/Telephone with all fittings complete all as directed.
S&F modular type TV Co-axial socket, 1 Module including junction box, sheet cover and frame complete all as directed.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and directed.
S&F call bell, ding dong type, AC single pole, 230 volt complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50 mm dia complete all as specified and directed.
S&F ceiling fan regulator, electronic, socket type, 5 speed 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F angle type holder insulated body with back plate suitable for batten fittings Completeall as specified and directed.
S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95 Make- Halonix Cat part No- HLTLD-04-20-CW, ORIENT Cat part No-LBLN-20-C-AL /Philips Cat part No- BN021C LED22S PSU CW GR
S&F in replacement of old U/S tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Philips cat part- BN021LED12S6500PSUGR, Halonix Cat part No- HLTLD-04-10-CW
S&F decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for LED lamp 12 Watt (B-22 base) including one number 12 Watt LED lamp complete all specified and directed. Make: Halonix Cat part No. HLWB-01-B22 or equivalent in Philips/Bajaj.
S&F in replacement energy saving new generation LED 10/6 Watts, 6000 K, IP-65 bulk head luminarie with opal diffuser complete including connecting electrically using 3 core copper flexible cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings complete all as specified and directed. Make:- Orient Cat Ref LIBHP-10-C/ Philips Cat ref WT202W LED 10S CW PSU S3 PC / Havells Cat Ref RUGBY GENXFS 10WLED 865SSYMBOPC
S&F in replacement exisitng unsv Lamp with LED Lamp 12 watt, 6500 K, 230 volts E-27 Base complete all as specified and directed. Make: CG/ Philips/ Havells/C&S.
S&F in replacement of bldg security light fitting energy saving high efficiency LED street light fitting 30/36 Watts, excellent thermally managed pressure die cast aluminium housing come with in built IR sensor for automatic on/off, IP-65 and making connections using flexible 3 core copper cable of size 1.00 Sqmm from ceilling rose/PVC connector to light fittings or as directed. Make:- Orient Cat part LSFT-36-C-PCK-DLS/ Halonix Cat part No. LED HW SL 30 WHLSLD-ML04-30-CW-DIMM-RTC or equivalent in Bajaj/Philips
M&L for taking down carefully existing ceiling fan/exhaust fan for greasing / oiling of ball bearings / bushes and making it smooth and noise free operation and painting with one coat of Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts/bolts, washers and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface all as specified and directed.
S&F exhaust fan of 300 mm sweep, heavy duty, AC single phase 230/240 volts, steel body complete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan including cutting hole of required size in wall, grouting of nuts and bolt etc and making good to match the existing surface complete all as specified and directed.
S&F exhaust fan of 250 mm sweep, AC single phase 230/240 volts, PVC body complete with louvers including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, including cutting hole of required size in wall, grouting of nuts and bolt etc and making good to match the existing surface complete all as specified and directed.
S&F meter box polycarbonate thermoplastic of size 276 x 366 x 186 mm (approx) enclosure minimum IP 65 protection with eternally embedded gasket all four sides pre knock out cable entry system, dust proof, shock proof, water proof to accommodate one single phase electric meter, one MCB DP 25 Amp, cable connector of suitable rating and cable glands of suitable size all as per IEC, connecting with suitable size of single core multi standard copper conductor wire from DB to meter boards and necessary cutting chases of meter board and making good disturbed surface including dismantling and taking down old unserviceable energy meters of any type / capacity after necessary disconnection of electrical wires/ XLPE cable etc. and marking the Quarter No on each meters with parmanent marker pen and keeping in safe custody for re-fixing complete all as specified and directed.
S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single pole and neutral 240 volts, 12 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire 200 Amp rates copper strip bus bar of appropriate capacity complete all as specified and directed Note :- (i) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications. (ii) All connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iii) All vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v) MCB's should have a same make as of DB.
M&L in replacement of existing unsv MCCB 100 Amps current carrying capacity 16 KA, AC 415 Volts four pole, 50 Hz including providing thimble complete all as specified and directed.
S&F in replacement MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement MCB SPN 240 volts, 'C' curve of rating 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement sheet metal enclosures, single pole with socket, plug top and one single pole MCB 20 Amps, 240 V complete all as specified and directed.
S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.
M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way with angle iron frame all round made of AI 40 x 40 x 4 mm, adequate qty of charcoal dust and salt layers all around the earth plate, including earth work in any type of soil, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Sethi Brothers (BID ID -3081347)
SHRI RADHAYSHYAM JHA (BID ID -3083077)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .