REPAIR TO JOINERY, FALSE CEILING AND ALLIED WORKS IN OLD PROJECT AREA AT AF STN MANAURI

Amount

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all and M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying 2 coats of OBD on new surfaces complete all as specified and directed.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all and M & L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 3%by weight of cement) on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured & paid seprately.

Supply only intergal water proofing complete all as specified and directed.

M & L apply two coat of cement based paint on new surface of wall including cornices etc complete all as specified and directed.

Taking down cement plaster on of ceiling wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc andM & L rendering 10mm thick cement plaster 1:3 on ceiling surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of New plastered surface of ceiling including cornices and apply two of white wash complete all as specified and directed.

Demolition of brick masonry built in cement mortar complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan any radius as in half thick wall built in CM 1:4 complete all as specified and directed

M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and directed

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed

S & F Steel ventilator with top hung/Side hung shutter including hinges, steel peg stay, complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc. 2.00 sqm each complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat but exceeding 1.5 Sqm but not exceeding 4 Sqm each ccomplete all as specified and directed.

S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Taking down Shutters of any description exc 2.00 sqm each complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, ection 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed .

Dismantling wrought iron or mild steel work of any description (i.e wind tie etc) not otherwise provided for etc complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F Mild steel framed work such as window grills or guard bars, with ends of bars shouldered and or riveted or forged in to spikes, framed guard bar and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed.

S & F in repair 1.25 mm thick Mild Steel Plain, black sheet in Chullah hood, covering to door shutters, ducts, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed.

S & F powder coated aluminium doors frames and shutters fixed or side hung including jointing cleat for fixing including all fittings like handles, locks, hinges, stoppers, latches etc complete all as specified and directed. Drg No : CE (AF)/NGP/03/TD/32, Sheet 1 to 2/2.

S & F powder coated aluminium grills of approved design and pattern, with approved standard section fixed to the window frame complete all as specified and directed.

S & F sheet glass, 5 mm thick tinted shade ordinary quality and glazing with oil putty/rubber gasket/silicon gun complete all as specified and directed.

S & F repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed as directed

S & F repair rubber beading size 65x5 mm for Doors complete all as specified and directed.

S & F repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F Pressed steel frames for door frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

S & F Pressed steel frames for door frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

M & L PCC 1:3:6 type C1 using 12.5 mm graded stone aggregate for fiiling of hollow section complete all as specified and directed

M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate for fixing of hold fast etc complete all as specified and directed

S&F in Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F in extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.

S&F in Aluminum Barrel tower bolt 150mm complete all as specified and directed

S&F in repair aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified and directed.

S & F in repairs galvanized mild steel wire cloth 0.56 nominal dia of wire and avg width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows complete all as specified and directed.

S & F in galvanized mild steel wire cloth 0.56 nominal dia of wire and avg width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows complete all as specified and directed.

S&F in in repairs extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.

S&F in in repairs Aluminum Barrel tower bolt 150mm complete all as specified and directed

S&F in in repairs aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed.

S & F in repairs 100 mm Hasp and staple,aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers & complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing complete all as specified and directed.

M & L for 5mm thick plain sheet glass ordinary quality including glazing with putty/rubber gasket /silicon gun area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F sheet glass, 3.5mm thick ordinary quality and glazing with oil putty complete all as specified and directed.

M & L Running welding in repairs thickness of metal to be welded n exc 6mm thick complete all as specified and directed.

M & L spot welding in repairs n exc 2.5 cm in lenghth,tthickness of metal to be welded n exc 6mm thick complete all as specified and directed.

S &F in reapirs Aluminium(Die cast) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F in repairs 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for preparation of new wooden surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed .

M & L for preparation of old wooden surface exceeding 10Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surface exceeding 10Cm width or girth and apply one coat of synthatic enamel paint complete all as specified and directed.

M & L for preparation of new Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed .

S&F in repair mild steel chromium plated curtain rod 25 mm dia on SS brackets and fixing with decorative side finails both ends etc complete all as specified and directed

S & F in repairs MS steel window peg stay stove enamelled for supporting windows shutter complete all as specified and directed.

S & F in repairs MS steel window left/right including necessary welding for windows shutter complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed.

S & F in repairs ceiling 4mm thick Non asbestos fibre cement building boards only and including two coat of white wash, complete all as specified and directed.

S & F in repairs gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.(except grids)

S & F in repairs gypsum board 12mm thick in ceiling over and including anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified and as directed

M & L for preparation of ceiling surface and applying two coats of OBD over a coat of putty as required and as directed

S & F in repairs cement building board/designer E-Board only with all finishes size 595 x 595mm fixed in ceiling required complete all as specified and directed.

S & F in repairs grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross 'T' 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 4mm thick non asbestos fibre fire resistant cement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners etc for securing framework to ceiling wherever required complete all as specified and directed.

S & F in repair 18/19mm thick commercial plywood borad interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens complete all as specified and directed.

S&F in reapir stainless steel kitchen plate rack of size 31"x30"x10" of 0.63mm thickness stainless still(grade AISI304(18/8)18% Chrome & 8% Nickle).scratch less complete all as specified and directed.(Make:- Silvershine model No.SSKPR-314 or equivalent in other makes as given in appx "B" list of makes duly approved by AGE(I)

S&F repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S & F in repairs tubular towel rail 20mm dia 'D' type, 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats

Note:- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

m/s neeraj kumar shukla (BID ID -3109677)

M/S R S Traders (BID ID -3102762)

M/S vibhuti enterprises (BID ID -3102848)

M/S AM ENTERPRISES (BID ID -3102347)

M/S SHIV BALLABH MISHRA (BID ID -3103334)

HARSH ASSOCIETES (BID ID -3105997)