Testing, Maintenance, fault rectification and addition-alteration of Fire Detection and Alarm System, Mod Labs, ICCM and North Gate portal, BARC, Trombay,Mumbai-400085

Amount

Maintenance, cleaning, rectification of faults and testing of fire detectors and devices for items detailed below and as per clause no.1 of technical specifications

Cleaning, rectification of faults, changes of software address, testing of 10 /8 loop FA control panel (Honeywell Esser Model No. FlexES-18-18 ) with redundant CPU, Control module, Display & Operating module, Essernet module, 5 Active loops as per clause no.1.1 of technical specifications

Rectification of faults, changes of software address, testing of GUI Software (FlexES Guard) along with testing & maintenance of 43 inch Samsung Graphics Monitor, Industrial PC & SEI Graphic panel as per clause no.1.2 of technical specifications

Cleaning, rectification of faults and testing of Multi sensor detector ( 2876 Nos. Honeywell make O2T - part No. 802374 & 24 Nos. of Bosch make MSD) with isolator Base as per clause no.1.3 of technical specifications

Cleaning, rectification of faults, alignment wherever required and testing of Beam detectors as per clause no.1.4 of technical specifications

Cleaning, rectification of faults and testing of Toxic Gas detector for CO detector( Model No. SP-2104 Plus of Honeywell RAE System) as per clause no.1.5 of technical specifications

Cleaning, rectification of faults and testing of Manual Call Point (Honeywell-79 No. & Bosch-5 No.) as per clause no.1.6 of technical specifications

Cleaning, rectification of faults and testing of Flasher cum Sounder ( IQ8Alarm sounder- Red- Part No. 807206- 94 Nos. & Bosch- 5 Nos.) as per clause no.1.7 of technical specifications

Cleaning, rectification of faults and testing of Remote Indicator ( Part No. 781814) as per clause no.1.8 of technical specifications

Cleaning, rectification of faults, changes of software address, testing of 2 loop FA control panel (BOSCH MPC-XXX C FPA-5000) with redundant CPU, Control module, Display & Operating module, Essernet module, 2 Active loops as per clause no.1.9 of technical specifications

Supply, installation, testing and commissioning of 2 pairs x 1.5 sq.mm multistranded copper conductor twisted pair, ATC shielded, GI round wire armoured, FRLS grade outer jacket. The cable is to be installed with GI saddle/spacers on wall/beam/ceiling/above false ceiling/false floor etc. All required documentation and preparation of drawing for uploading the same in GUI as per clause no.2 of technical specifications

Supply, installation, testing and commissioning of multi sensor O2T smoke detector ( part No. 802373 of Honeywell Esser) as per clause no.3 of technical specifications

Supply, installation, testing and commissioning of O2T smoke detector ( part No. 802373 of Honeywell Esser) along with suitable Isolator base and with required size of Powder coated M S box as per clause no.4 of technical specifications

End termination of 2 pairs x 1.5 sq.mm. twisted pairs shielded armoured cables with Brass Compression gland and interconnection & termination with suitable size copper lugs as per clause no.5 of technical specifications

Supply, installation, testing and commissioning of Remote Indicator ( Part No. 781814) with required size powder coated M.S. Box as per clause no.6 of technical specifications

Supply, installation, testing and commissioning of Manual call Point with required size powder coated M.S. Box as per clause no.7 of technical specifications

Only installation, testing and commissioning of Flasher cum Hooter as per clause no.8 of technical specifications

Supply and installation of MCP glass suitable for Honeywell Esser make Manual Call point as per clause no.9 of technical specifications

Supply and installation of MSD detector covers as per clause no.10 of technical specifications

Supply and installation of CO sensor element for existing CO detector Model No. SP-2104 Plus of Honeywell RAE System as per clause no.11 of technical specifications

Supply, installation, testing & commissioning of 250 VA/Watt SMPS Power supply 170-264 Volts 50 Hz input and 10 Amps, 24 volts DC output (Model No. ABL2REM24100H or equivalent Model of Schneider Electric) with suitable 16 SWG powder coated front openable box as per clause no.12 of technical specifications

Supply, fabrication and installation of MS item made out of MS angle/channel/Patti as per clause no. 13 of technical specification.

Supply, fabrication and installation of M. S. box made as per clause no. 14 of technical specification.