Building Construction Tenders in Andaman and Nicobar Islands

Distribution Transformer, 3 Phase, Up to and including 200 KVA (Q3)

Power Generator - DG Set (up to 900 KVA) (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 1, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6666757 Dated : 10-09-2025 Bid Document 1/8 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Estimated Bid Value 3062778 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 61256 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 2.00 ( ) Duration of ePBG required (Months). 15 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : Executive Engineer )E) BSNL Electrical Division, Sri Vijaya Puram (Sushil Kumar Shekar) 2/8 Splitting

Online UPS (V2) (Q2) (3 (3 ))

Monthly Basis Cab & Taxi Hiring Services - Sedan; 1500 km x 320 hours; Local

Monthly Basis Cab & Taxi Hiring Services - Sedan; 1200 km x 208 hours; Local

Energy Audit Service - Lumpsum Based - Detailed; Electricity Department Andaman and Nicobar Administration

Procurement of Marine Navigational LED Lantern equipment with 10NM Luminous Range.

OEM/Compatible Cartridge/Consumable (Q2)

OIL FILTER, FUEL FILTER ELEMENT WITH O RING, O RING 18.8 x 1.8 DRAIN PLUG, O RING BREATHER CAP, O RING 8.3 x 1.78 DIP STICK, SEALING WASHER CU 14 x 18, EICHER ENGINE OIL 15W40 9.5 LTR, COGGED V BELT AV13 x 1335, MAIN ELEMENT, GASKET INSPECTION COVER, O RING 29.2 x 3, O RING FOR LIFTER GUIDE, O RING 36.2 x 3, SEALING WASHER, FUEL PIPE ASSLY, GASKET FOR Cyl HEAD COVER, ENGINE SHUT OFF SOLENOID, OIL PRESSURE SENSOR SINGLE PORT, FUEL PIPE FEED PUMP TO FILTER, FUEL PIPE FILTER TO FUEL PUMP, OIL PRESSURE SWITCH, STARTER MOTOR ASSLY, BLOWER SHAFT SUB ASSLY, AVR 5 to 125 KVA, AMF CONTROLLER TEC 9900C, 18 Inch EXHAUST FAN

Revolving Chair executive type for East Island Lighthouse station, Plastic Chair with arm for East Island Lighthouse, Transportation of Chairs to East Island Lighthouse Station, Revolving Chair executive type for North Point Lighthouse Station, Plastic Chair with arm for North Point Lighthouse, Transportation of Chairs to North Point Lighthouse Station, Revolving Chair executive type for Little Andaman Lighthouse Station, Plastic Chair with arm for Little Andaman Lighthouse Station, Transportation of Chairs to Little Andaman Lighthouse Station, Revolving Chair executive type for Keating Point Lighthouse Station, Plastic Chair with arm for Keating Point Lighthouse Station, Transportation of Chairs to Keating Point Lighthouse Station, Revolving Chair executive type for Campbell Bay DGPS Station, Plastic Chair with arm for Campbell Bay DGPS Station, Transportation of Chairs to Campbell Bay DGPS Station

A4 Size Copier paper 75 GSM, A4 Size Pink Copier paper 75 GSM, A4 Size Yellow Copier paper 75 GSM, A3 size photo copier paper 75 GSM, Ball Point Pen Blue, Ball Point pen Red, Gel Pen Superior Quality Pilot, Eraser Pack of 20, Sharpener Pack of 20, Paper Flag Post It, Meeting Pad, Transparent File Button File, Paper Cutter Knife Big Size, Whitener Pen 7 ML, Fevicol Bottle 200gm, Fevistick 8gm, Fevi Quick, Stapler medium, Stapler Big, Stapler Pin medium, Stapler pin Big, Envelopes large 28cm x 12 cm, Envelopes medium 23cm x 10 cm, Calculator 12 digits, Sketch Pen, Brown Packing Tape 50mm width Roll, Cello Tape Big Size 50mm width, Gate Pass Book, Visitor Ticket Roll Paper, Vehicle Log Book

Earthing Plate, Lightning Arrestor, Copper Strip, Charcoal, Salt, Earthing Chamber, Earthing Pipe

HP 137A Blk LaserJet Toner Cartridge, HP 152A Blk LaserJet Toner Cartridge, HP 77A Black LaserJet Toner Cartridge, HP 215A Black Original LaserJet Toner Cartridge, HP 215A Cyan Original LaserJet Toner Cartridge, HP 215A Magenta Original LaserJet Toner Cartridge, HP 215A Yellow Original LaserJet Toner Cartridge, Kyocera TK-7120 Toner Cartridge

Television supply and installation, Mixer Grinder, Double Door Refrigerator, Toaster With Electronic Sensor, Induction Stove, Electric Iron Box, Electric Kettle, Water Purifier Supply and Installation, Split air conditioner Supply installation and commissioning, Geyser Supply and installation, Mosquito Racket, Vacuum Cleaner, Hair Dryer, Room Heater, Inverter Supply and Installation, Lead Acid Battery, Cables, Modular Box, Modular Plate, Modular Switch, Modular Socket, Set top box stand Supply and Installation, Inverter battery trolley Fabrication, Wiring

Dishwasher Liquid 500 ml Vim Pril etc, Insecticide spray Mortein 200 ml, Garbage bag Medium Size, Floor cleaner Lizol, Bleaching powder, Tissue paper Good Quality, Toilet cleaner Harpic 500 ml, Washing powder 1kg pkt Surf Excel Tide etc, Broom soft Good Quality, Broom country Good Quality, Room freshener, Colin spray 500 ml, Mop Good Quality, Scrubber Dishwasher Scrub, Phenyl 01 Ltr Bottle, Odonil, Soap small, Liquid hand wash, Mosquito repellent kit, Mosquito repellent Liquid refill, Battery AAA, Battery AA, Battery R20 1.5 Volt Torch Cell, Glass Tumbler Set of 6, Turkey Towel Big Size Good Quality, Bedsheet Double Bedsheet Good Quality White, Pillow Good Quality White, Pillow Cover Good Quality White, Hand Towel Big Size Good Quality, Cotton waste 01 kg, Paint signal red 1 Ltr Size, Paint white 1 Ltr Size, Paint black 1 Ltr Size, Paint green 1 Ltr Size, Paint grey 1 Ltr Size, Aluminium Paint 1 Ltr Size, Primer 1 Ltr Size, Paint Thinner 5 Ltr Size, Insulation tape, Paint brush 12mm, Paint brush 25mm, Paint brush 50mm, Paint brush 75mm, Paint brush 100mm, Brasso, Petroleum Jelly 01 Kg, Distilled Water 02 Ltr Bottle, Emery Paper, Multipurpose Grease 01 Kg, Hacksaw Blade, Crockery set Dinner Set LaOpala, Torch Rechargeable, Umbrella Big Size, Rain Coat XL Size, Slippers Size 9, Jug Glass, Cup and Saucer Set of 6, Grass cutter Rope Nylon Trimmer, Tea Coaster Set of 6

LEDMirrorLight, LEDTubeLight, LEDbulkheadLight, FalseceilingLightSquare, FalseceilingLightround, SurfaceLight9X9inches, SurfaceLight2X2feet, FalseceilingLight2X2feet, LEDStreetLight, BLDCCeilingfan, WallMountingFan, ExhaustFan, ModularSwitch1way6A, ModularSwitchDummy, ModularSwitchbellpush, ModularSwitch2way, ModularSwitch1way16A, ModularSocket6A, 3PinTop6A, 3PinTop16A, ModularSocket16A, FanRegulator, MCCB200A, MCCB100A, Isloator100A, Isloator40A, MCBSP10A, MCBSP16A, MCBSP20A, MCBSP32A, MCBDP63A, CallBell, DBmainswitch, DNDMMRswitch, MotorStarterSwitch, Capacitor40MFd, Capacitor2.5MFd, InsulationTape, LEDDriver18to20W, LEDDriver4to6W, LEDDriver36W, LEDDriver45W, RJ11IO, RJ45IO

Digital Multi Meter, AC DC Clamp meter, insulation tester, earth tester, blower, soldering iron, pump, line tester, hydrometer, angle grinder, wrench, crimping tool, Wire Stripper, Steel bit driver, 2 in 1 screw driver, Screw driver, Steel filter tool kit, Screw driver set, hand operated pneumatic barrel pump

Manpower Outsourcing Services - Fixed Remuneration - IT- Technical; Senior Radio Technician; Diploma, Manpower Outsourcing Services - Fixed Remuneration - IT-Technical; Navigational Assistant; Diploma, Manpower Outsourcing Services - Fixed Remuneration - IT-Technical; NAVTEX Operator; Diploma, Manpower Outsourcing Services - Fixed Remuneration - Attendant; Attendant; Matriculation or ITI

Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Technical Officer; Graduate, Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; FIeld Assistant; Diploma, Manpower Outsourcing Services - Fixed Remuneration - Attendant; Attendant; Matriculation or ITI

Manpower Outsourcing Services - Fixed Remuneration - IT- Technical; Technical Assistant; Diploma, Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Civil Engineer; Diploma, Manpower Outsourcing Services - Fixed Remuneration - Admin; Administrative Operator or Office Assistant or Executive Assistant; Post Graduate, Manpower Outsourcing Services - Fixed Remuneration - Admin; Data Entry Operator; High School, Manpower Outsourcing Services - Fixed Remuneration - Driver LMV; Driver - LMV; High School

Split Air Conditioner Including Green AC, Wall Mount Type (V2) (Q2)

urinal cubes-Deodorizer Block Urinal Cubes-Deodorizer Block ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Material Material of Urinal Cube PARADICHLORO BENZENE COLOUR PERFUME Physical Attributes Shape of Cube ... INDIRA BHAWAN , ...

Automotive Vehicles - Pneumatic Tyres for Passenger Car Vehicles - Diagonal and Radial Ply as per IS 15633 (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller OEM Authorization Certificate *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Bid Number ( ) : GEM/2025/B/6050404 Dated : 12-03-2025 Bid Document 1/5 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Estimated Bid Value 149400 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 3.00 Duration of ePBG required (Months) ( ) . 14 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Executive Engineer(E&M), SVPMC Sri Vijaya Puram Municipal Council, Atlanta Point, A&N Islands-744101 (Executive Engineer) MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Power Generator - DG Set (up to 900 KVA) (Q2)

High End Desktop Computer (Q2) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Certificate (Requested in ATC), OEM Authorization Certificate, OEM Annual Turnover, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/6000726 Dated : 27-02-2025 Bid Document 1/9 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Bitumen Felts for Water Proofing and Damp Proofing as per IS 1322 (Q3) MSE Exemption for Years Of Experience and Turnover Yes Startup Exemption for Years Of Experience and Turnover Yes Document required from seller Experience Criteria, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes Bid to RA enabled No Type of Bid Two Packet Bid Bid Number ( ) : GEM/2025/B/5950522 Dated : 14-02-2025 Bid Document 1/6 Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MSE Purchase Preference MSE Purchase Preference No MII Purchase Preference MII Purchase Preference No 1. If the bidder is a Micro or Small Enterprise as per latest definitions under MSME rules, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Galvanized Iron Tee 50mm equal, Galvanized Iron Tee 80mm equal, Galvanized Iron Socket 50mm, Galvanized Iron Socket 65mm, Galvanized Iron Socket 80mm, Galvanized Iron Nipple 50mm, Galvanized Iron Plug 40mm, Galvanized Iron Plug 50mm, Galvanized Iron Plug 80mm, Galvanized Iron Union Socket 40mm, Galvanized Iron Union Socket 50mm, Galvanized Iron Union Socket 80mm, Galvanized Iron Union Socket 65mm, Galvanized Iron plug 65mm, Galvanized Iron Pipe 15mm, Galvanized Iron Pipe 25mm, Galvanized Iron Pipe 40mm, Galvanized Iron Pipe 50mm, Galvanized Iron Pipe 65mm, Galvanized Iron Pipe 80mm, Galvanized Iron Nipple 65mm, Galvanized Iron Nipple 80mm, Galvanized Iron Socket 15mm, Galvanized Iron Union Socket 15mm, Galvanized Iron Bend 15mm, Galvanized Iron Bend 25mm, Galvanized Iron Tee 65 into 25mm, Galvanized Iron Tee 65 into 50mm, Galvanized Iron Tee 80 into 15mm, Galvanized Iron Tee 80 into 50mm, Galvanized Iron Tee 80 into 65mm, Gun Metal Gate Valve 65mm, Gun Metal Gate Valve 80mm, Gun Metal Gate Valve 40mm Bid Number ( ) : GEM/2024/B/5721668 Dated : 18-12-2024 Bid Document 1/33

150mm, Cast Iron Sluice Valve 200mm, Cast Iron Sluice Valve 250mm, Cast Iron Sluice Valve 300mm, Cast Iron Airvalve 200mm, Cast Iron Non Return Valve 100mm, Cast Iron Non Return Valve 150mm, Cast Iron Non Return Valve 300mm, Cast Iron Tee 500 into 500 into 450 mm, Rubber Gasket 150mm, Rubber Gasket 200mm, Rubber Gasket 300mm, Rubber Gasket 250mm, Rubber Gasket 400mm, Rubber Gasket 450mm, Rubber insertion Sheet 6mm thick, Rubber Gasket 15mm, Rubber sheet 4mm thick, M S Bolts and Nuts with washer M12 into 100 mm, M S Bolts and Nuts with washer M16 into 100 mm, M S Bolts and Nuts 5by8Inchs 3Inchslong, Spun Yarn, Leadwool, PP R Coupler 50mm, PP R Coupler 63mm, PP R Coupler 75mm, PP R Coupler 90mm, PP R Coupler 110mm, PP R Union 50mm, PP R Union 63mm, PP R Flange Core 50mm, PP R Flange Core 63mm, PP R Flange Core 75mm, PP R Flange Core 90mm, PP R Flange Core 110mm, PP R Flange 50mm, PP R Flange 63mm, PP R Flange 75mm, PP R Flange 90mm, PP R Flange 110mm, PP R Pipes 50mm, PP R Pipes 63mm, PP R Pipes 75mm, PP R Pipes 90mm, PP R Pipes 110mm, PP R Reducer 63by50mm, PP R Reducer 75by50mm, PP R Reducer 90by50mm, PP R Reducer 75by63mm, PP R Reducer 90by63mm, PP R Reducer 90by75mm, PP R Reducer 110by63mm, PP R Reducer 110by75mm, PP R Reducer 110by90mm, PP R Ballvalve 50mm, PP R Ballvalve 63mm, PP R Ballvalve 75mm, PP R Equal Tee 50mm, PP R Equal Tee 63mm, PP R Equal Tee 75mm, PP R Equal Tee 90mm, PP R Equal Tee 110mm, PP R Reducer Tee 63by50by63mm, PP R Reducer Tee 75by50by75mm, PP R Reducer Tee 75by63by75mm, PP R Reducer Tee 90by50by90mm, PP R Reducer Tee 90by63by90mm, PP R Reducer Tee 90by75by90mm, PP R Reducer Tee 110by50by110mm, PP R Reducer Tee 110by63by110mm, PP R Reducer Tee 110by75by110mm, PP R Reducer Tee 110by90by110mm, PP R End cap 50mm, PP R End cap 63mm, PP R End cap 75mm, PP R End cap 90mm, PP R End cap 110mm, PP R Welding Machine 75-110mm, PP R Welding Saddle die 63 into 25by32mm, PP R Welding Saddle die 75 into 25by32mm, PP R Welding Saddle die 90 into 25by32mm, PP R Welding Saddle die 110 into 25by32mm, PP R Welding Saddle die 160 into 25by32mm, PP R Welding Saddle die 160 into 40by50mm, PP R Welding Saddle die 160 into 63by75mm, PP R Elbow 90 Degree 50mm, PP R Elbow 90 Degree 63mm, PP R Elbow 90 Degree 75mm, PP R Elbow 90 Degree 90mm, PP R Elbow 90 Degree 110mm Cast Iron Bend 150x45 Degree, Cast Iron Air Valve 100mm, Cast Iron Tee 150x100mm, Cast Iron Tee 150mm equal, Cast Iron Tee 450mm equal, Cast Iron Tee 450x300mm, Cast Iron Tee 100x80mm, Cast Iron Tee 100mm equal, Cast Iron Collar 80mm, Cast Iron Collar 100mm, Cast Iron Collar 150mm, Cast Iron Collar 250mm, Cast Iron Collar 300mm, Cast Iron Collar 400mm, Cast Iron Collar 450mm, Cast Iron Collar 500mm, Cast Iron Flange Socketed tailpiece 100mm, Cast Iron Flange Socketed tail piece 150mm, Cast Iron Flanged Socketed tailpiece 200mm, Cast Iron Flanged Socketed tailpiece 250mm, Cast Iron Flanged Socketed tailpiece 300mm, Cast Iron Flange Socketed tailpiece 400mm, Cast Iron Flange Socketed tailpiece 450mm, Cast Iron Flange Socketed tailpiece 500mm, Cast Iron Flange Spigoted tailpiece 100mm, Cast Iron Flange spigoted tailpiece 150mm, Cast Iron Flange spigoted tailpiece 200mm, Cast Iron Flange spigoted tailpiece 250mm, Cast Iron Flange spigoted tailpiece 300mm, Cast Iron Flanged Bid Details 2/112

Readymade Bituminous Pothhole Patching Mix as per IS 217 Cutback Bitumen, IS 14982 Anti - Stripping Agent (Q4)

100mm Dia G.I Pipe Med grade Screwed and socketed as per IS 1329, 65mm Dia G.I Pipe Med grade Screwed and socketed as per IS 1329, 50mm Dia G.I Pipe Med grade Screwed and socketed as per IS 1329, 40mm Dia GI Pipe Med grade Screwed and socketed as per IS 1329, 80mm x 80mm x 80mm dia G.I Tee, 80mm G.I Bend, 80mm Dia G.I Nipple 6 inch length, 80mm Dia G.M Gate Valve heavy duty, 80mm x 65mm Dia GI Reducer, 80mm Dia G.I Union Socket, Synthetic Enamel Paint, 65mm Dia G.I Nipple 6 inchLength, 65mm Dia G.I Union Socket, 65mm x 50mm Dia GI Reducer, 50mm Dia G.I Nipple 6 inchLength, 50mm Dia G.I Union Socket, 50mm Dia G.I Coupling Socket, 50mm Dia G.I Plug, 80mm Dia G.I Coupling Socket, 80mm Dia G.I Elbow, 65mm Dia G.I Coupling Socket, 65mm Dia G.I Bend, 50mm Dia G.I Bend, 65mm Dia G.I Plug, 80mm x 80mm x 65mm dia G.I Tee, 65mm Dia G.I Elbow, 80mm Dia G.I Nipple 4 inch Length, 65mm Dia G.I Nipple 4 inchLength, 50mm Dia G.M Gate Valve heavy duty, 100mm x 100mm x 100mm Dia CI Tee, 100mm Dia G.I Union Socket, 100mm Dia G.I Bend 90 Degree, 100mm Dia G.I Coupling Socket, 100mm x 80mm Dia GI Reducer, 100mm Dia G.I Nipple 6 inch Length, 100mm Dia CI 45 Degree Bend, 100mm Dia CI 22.5 Bend, 50mm x 40mm Dia GI Reducer, 40mm Dia GI Union Socket, 40mm Dia GM Gate Valve heavy duty, 40mm dia GI Nipple 6 inch Length, 40mm Coupling Socket, 40mm Dia GI Plug, 100mm x 100mm x 80mm Dia CI Tee, 100mm x 100mm x 80mm Dia GI Tee, 100mm Dia GI Nipple 4 inch Length, 100mm Dia CI Collar Bid Number ( ) : GEM/2025/B/6124356 Dated : 28-04-2025 Bid Document 1/32

HEDGE TRIMMER or HEDGE CUTTER (Q3) MSE Exemption for Years of Experience and Turnover

Unplasticized PVC Pipes for Potable Water Supplies as per IS 4985 (Q3), Commercial CPVC Pipe Fittings (Q3) MSE Exemption for Years of Experience and Turnover

Common Proofed Canvas/Duck and Paulins (Tarpaulins) as per IS 2089 (Q2) MSE Exemption for Years of Experience and Turnover

Common Proofed Canvas/Duck and Paulins (Tarpaulins) as per IS 2089 (Q2) MSE Exemption for Years of Experience and Turnover

Monthly Basis Cab & Taxi Hiring Services - SUV; 2000 km x 320 hours; Local 24*7

Manpower Outsourcing Services - Minimum wage - Unskilled; High School; Others

Monthly Basis Cab & Taxi Hiring Services - SUV; Per day 08 hours and 80 Kms; Local

4mm thick Rubber Sheet Black in Clour, Ductile Iron Non Retun Valve 300 dia, Mild Steel Nuts and Bolts m 16 x 80 mm, Mild Steel Bolt and Nuts with washer m 12 x 100mm length, Mild Steel Bolt and Nuts with washer m 16 x 100mm length, Ductile Iron Pipe 150 mm, Ductile Iron Pipe 200 mm, Ductile Iron Pipe 250 mm, Ductile Iron Pipe 300 mm, Ductile Iron Pipe 450 mm

BOQ (Q3) ()

Composite Office Tables confirming to IS 8126 (V2) (Q2)

Plain copier Paper, Ruled Register 300 pages, File board, File flap, Sticky colour flag, Cloth coated cover, Stapler, Paper clip, Paper Pin, Fevicol, Punching machine, File tag small

File/Folder (V3) (Q4) MSE Exemption for Years of Experience and Turnover

File/Folder (V3) (Q4), scissors (Q4), Carbon Papers as per IS 1551 (Q4), Fluid Correction Pen (V2) (Q4), Tags for Files (V2) as per IS 8499 (Q4), Dak Pad (V2) (Q4), Register (V2) (Q4), Paper Adhesive, Liquid Gum and Office Paste Type as per IS 2257 (Rev) (Q3) MSE Exemption for Years of Experience and Turnover

Gel Pen (V3) (Q4), rubber bands (Q4), Air Freshener Solid and Gel (Q4), Paper weights (Q4), Ball Point Pens (V2) as per IS 3705 (Q4), Clips, Paper as per IS 5650 (Q4), Self Adhesive Flags (V2) (Q4), Toilet Soap or Liquid (Q4), Staplers (V2) (Q3), Stapler Pin/Staples (V2) (Q4), paper or eyelet punches (Q4), Metric Scales (Plastic) for General Purposes as per IS 1480 (Q4), Desktop Calculator - Electronics (Q4), scissors (Q4), Packaging Tape (Q4), Desk Pads - Writing (V2) (Q4) MSE Ex

Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) MSE Exemption for Years of Experience and Turnover

Self Adhesive Flags (V2) (Q4), Ball Point Pens (V2) as per IS 3705 (Q4), Desk Pads - Writing (V2) (Q4), Clips, Paper as per IS 5650 (Q4), Notesheet (Azure Laid) (V2) (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Self Adhesive Flags (V2) Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Bid Number : GEM/2025/B/6295812 Dated : 14-06-2025 Bid Document 1/9 Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No Splitting

Split Air Conditioner Including Green AC, Wall Mount Type (V2) (Q2) MSE Exemption for Years of Experience and Turnover

flower pots or planters Flower Pots Or Planters ( 100 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values MATERIAL/SHAPE USAGE Material Plastic Plastic Shape (When viewed from Top) Round Round, ... INDIRA BHAWAN ,

Internal Combustion Engine Crankcase Oils for Automotive Application (Diesel and gasoline) as per IS: 13656 (Q2) ( PAC Only )

toilet cleaners liquid Toilet Cleaners Liquid ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values Colour and Fragrance Colour BLUE - Fragrance of the Liquid Cleaner pleasent - Material Main Ingredients HARPIC ... INDIRA BHAWAN ,