Building Construction Tenders in Haryana

Const. of Building For Citizen Facilitation Centre under Flyover Hisar By Pass Ward No. 1, M.C, Rohtak.

Upgradation of Existing PRI Building for setup of E-Library at village Mundhliya, Block Rewari, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Bithwana, Block Rewari, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Alawalpur, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Majra, Block Khol, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Mohammadpur, Block Bawal, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Jhabuwa, Block Bawal, Distt. Rewari

CONST. OF BUILDING FOR COMMUNITY CULTURAL ACTIVITIES IN SHRI GURU RAVIDASS DHARAMSHTHAN AT VILL. SIRASGARH BLOCK BARARA

Upgradation of Existing PRI Building for Setup of E-Library at village Bolni, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Jarthal, Block Dharuherai, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at Village Badhrana Block Bawal District Rewari

Upgradation of Existing PRI Building for Setup of E-Library at village Asalwas, Block Bawal, Distt. Rewari

Watch and Ward of office complex building for a period of 4 Months HSIIDC at IMT Manesar.

Upgradation of Existing PRI Building for setup of E-Library at village Janti, Block Rewari, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Budana, block Rewari, distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Bahala, Block Nahar, Distt. Rewari

Upgradation of Existing PRi Building for Setup of E-Library at Village Shadipur, Block Jatusana, Distt. Rewari

Renovation of existing building for the office of Mayor MC Manesar under jurisdiction of Municipal corporation Manesar

Upgradation of Existing PRI Building for setup of E-Library at village Nikhri, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Chandawas, Block Rewari, Distt. Rewari

Upgradation of Existing PRI Building for setup Mahila Sanskarti Kendra att village Khatawali, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup Mahila Sanskarti Kendra at village Malahera, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Raliawas, Block Dharuhera, Distt. Rewari

Upgradation of Existing PRI Building for setup of E-Library at village Musepur, Block Jatusana, Distt. Rewari

Upgradation of Existing PRI Building for setup Mahila Sanskarti Kendra at Village Pawati, Block Bawal, Distt. Rewari

Paint plaster, sanitary, wiring tile repair of door and window, brick work etc.

exhaust fan Conforming to IS 2312 -1967., Metallic louvred shutter suitable for 300 mm sizes exhaust fan., Metallic louvred shutter suitable for 380 mm sizes exhaust fan., 18- 22 watt LED surface mounted Batten light., 40 watt LED surface mounted Batten light., 5-7 watt LED Recessed orsurface Down lighter., 12 -15 watt LED Recessed or surface Down lighter., 18 watt LED Recessed or surface Down lighter., LED Batten Emergency, Inverter, luminaire minimum system lumen output of 2000 lumen., Utility knife Tapaia UK-3, Spare Blade UB-10 for utility knife UK-3 Taparia, Flexible connection pipe 450mm Long, metal braided Hoses ., Measuring Tape, Length of the Tape is 30 M. The width of the Blade is 13mm., Casing Capping clip, PVC Nail Clip 20 mm Double Nail., Aluminium Paint ., Red Oxide Metal Primer., Paint Thinner., Paint Brush 2 inch, Paint Brush 3 inch, Wooden Screw 35 x 8, Wooden Screw 50 x 8, Dry wall Gypsum Screw 0.75 inch, Dry wall Gypsum Screw 1inch, Dry wall Gypsum Screw 1.5 inch, 10 Amp, 12 way, PVC Strip Connector., 15 Amp, Iron drill bit Set having 25 Pcs ., Self supported FRP Platform Step Ladder, Multifunction Testers ., 400 Amp 04 Pole Power contactor., 16 Sq mm Aluminium Flat thimble, 25 Sq mm Aluminium Flat thimble, 50 Sq mm Aluminium Flat thimble, 70 Sq mm Aluminium Flat thimble, 95 Sq mm Aluminium Flat thimble, 120 sq mm Aluminium Flat thimble, 150 Sqmm Aluminium Flat thimble, 185 Sq mm Aluminium Flat thimble, 240 Sq mm Aluminium Flat thimble, 300 Sq mm Aluminium Flat thimble, 400 Sq mm Aluminium Flat thimble, 16 Sq mm Aluminium Ferrule, 25 Sq mm Aluminium Ferrule, 35 Sq mm Aluminium Ferrule, 50 Sq mm Aluminium Ferrule, 70 Sq mm Aluminium Ferrule, 70 watt Flood Light, powder coated pressure die cast aluminium body with driver ., 150 watt Flood Light, powder coated pressure die cast aluminium body with driver., 45 watt Street light LED fixture powder coated pressure die cast aluminium body with driver ., 72 watt Street light LED fixture powder coated pressure die cast aluminium body with driver., 90 watt Street light LED fixture powder coated pressure die cast aluminium body with driver., 150 watt Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver., 10 to 11 Watt, 0.6 Metre nominal size LED Bollard Light fitting complete with LED module., 25-watt LED-based post-top luminaire, IP 65, with Die-cast aluminium spigot housing, complete with diffuser, LED module, driver with surge protection ., 10 Watt to 12 Watt Spike LED light with aluminium housing, IP66 having tiltable feature to throw light in the desired direction., Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 2 X 16 sq. mm sq. mm 1.1 KV grade cable., Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 2 X 25 sq. mm sq. mm 1.1 KV grade cable., Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 3.5 X 35 sq. mm sq. mm 1.1 KV grade cable., Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 3.5 X 300 sq. mm 1.1 KV grade cable., Cable Junction Boxes, IP 66 weather proof, size 205 mm x 255 mm x 112 mm, with terminals suitable for 16 sq mm cable., 4 Inch Cutting Wheel for Metal suitable for 4 inch angle grinder., 1.5 Volt Alkaline non- rechargeable, type battery, size- AAA., 1.5 Volt Alkaline non-rechargeable, size- AA., 9 Volts Alkaline non-rechargeable Battery., 23A, 12V Alkaline Battery., LED, 10 watt per metre or 120 LED per metre, in various colors, IP65 rating, with adopter., Supplying of Adapter for LED Rope Light., LED Rope Light, 6 W per Mtr, IP65, Tri-Color. 18 Meter., Supplying Pidilite WD 40 mechinical contact cleaner in 500 ml can with Straw Spray., 2 x 16 sq mm aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade, confirming to IS 7098 Part 1 1988 with upto Date Amendments., 2 x 25 sq mm aluminium conductor, 3.5 x 35 sq. mm aluminium conductor, confirming to IS 7098 Part 1 1988 with up to Date Amendments., 3.5 x 120 sq. mm aluminium conductor, 3.5 x 400 sq. mm aluminium conductor, Socket tester to verify that the wall socket is correctly wired and to check for common faults., M-Seal - Regular epoxy compound., Pu Foam Insulation Sealant 750 ml, Distilled Water, 5 Liters ., Weatherproof, IP66, wire connector with plug and socket suitable for 4 sq mm copper cable., Digital Earth ResistanceTester., PVC Weatherproof, 8 module MCB DB with DIN rail., Wall-Mounted Voltage Stabilizer, Suitable for 1.5 Ton Split Air Conditioner., Suitable for 2 Ton Split Air Conditioner., Blue Plastic Crate, 4 Litre Capacity, Size 300 x 200 x 100 mm, suitable for material storage., PVC Weatherproof Switch Box, IP66 Rated., A Power adaptor with in built RCD 30 ma, Robustt Caution Tape 3 Inches x 130 Mt, Pack of 1, White and Red PVC Material, Barrication tape., Polypropylene Floor Standing Caution Sign Board, Stainless Steel Clip for fixing LED batten as per sample provided by department., Waterproof Paint Marke., 15A insulated test lead cable with dual-ended insulated crocodile clips, suitable for electrical testing. Set of 5 Pc., Plastic Step Stool, Nominal Dimensions Width 57 cm, Depth 54 cm, Height 60 cm., 30W 220V Round Corded Soldering Iron with LED Worklight . 6 Months Warranty., Solder Paste Flux Pack -50 gm, Lead-Free Soldering Wire, 0.8 mm diameter, suitable for electronic and electrical soldering and component repair. 20-gram pack., Cleaning Cloth Towels, Material 100 percent cotton., Microfiber Multi-Purpose Cleaning Wipe., Contactless Surface Temperature Detector., PVC Plastic Pipe Cutter, Cutting Capacity Up to 42 mm, HSS Bi-metal Holesaw Set, 20 TO 64 mm diameter hole saw sizes 20, 25, 32, 38, 51, and 64 mm., Plastic Tool Box with Organizer, Height 150 mm, width 190 mm, length 335 mm, High carbon steel Shovel with Wooden Handle., Hoe Powrahs, High Tempered Iron Pickaxe, Aluminium Self Supporting Type Tower Ladder Extendable PVC Pendent Holder, One way. Bed switch, 240 v, 50 Hz, Single pole 10 amps, two way switch, ISI marked. Modular type, Modular Bell Push Switch. Modular type, Modular blanking plate, Single pole 25 amps, one way modular switch, ISI marked., 2 module, Modular base & cover plate, 3 module, 4 module, 6 module, 12 module, Flame - Retardant, PVC Electrical insulation Tapes 6 mtr X 1.8 cm long, PVC gitti/PVC rawal plug/PVC fastener 38/40mm long/PVC fastener 38/40mm long, 3 mm thick phenolic laminated, 1.5 Sq. mm. FRLS/HFFR single core, multi strand copper conductor, PVC insulated cable suitable upto 1100 volts, 4 Sq. mm. FRLS/HFFR single core, 6.0 Sq. mm. FRLS/HFFR single core, Modular MCB single pole 25 Amp “C” curve, 3 kA breaking capacity., Pin Anchor Fastener 6 x 50, Pin Anchor Fastener 8 x 50, Pin Anchor Fastener 8 x 75, Pin Anchor Fastener 10 x 100, Ring Hook Fastener M-8, Ring Hook Fastener M-10, Wedge Anchor Fastener 8 mm x 75 mm, 3 mm thick PVC phenolic laminated round sheet cover minimum170 mm dia for fan box., 3 mm thick PVC phenolic laminated round sheet cover 100 mm dia., PVC Surface Modular box, BEE 5 star rating, 25 litres capacity water storage heater, with protection against over heating, Multifunction Safety Valve and external adjustable thermostat, with 16 A, plug top with in-built 30 mA RCD and 02 nos flexible connection pipe suitable for working with 230V AC, 1 Phase supply etc as required. (with 7 year warranty on inner tank, 3 year warranty on heating element, 2 year comprehensive Warranty), 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation B, 3 nos. blades, down rod upto 30 cm long, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 8.00, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, single phase AC Supply. The firm has to submit a type test report of the ceiling fan from a NABL accredited lab before commencement of supply. (BLDC Ceiling fan with minimum 2 years Warranty), Supply of 400 MM, Single phase wall mounting fan, Fresh air fan with louver shutter 250 mm sweep., 230 mm sweep, 1400 RPM, single phase, metallic exhaust fan Conforming to IS:2312 -1967., 18- 22 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F. ≥ 0.95, IP20, CRI ≥ 80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000°K 4000°K/5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on housing. with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement., 40 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin), Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved Embossing/Screen printing on housing. with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast/Extruded aluminium Body (Thickness ≥ 1.20 mm), 5-7 watt LED Recessed/surface Down lighter (Round/square Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, P. F.≥0.95, CRI ≥80, UGR (Unified Glare Rating) ≤ 19 Flicker free (flicker should be below 5 %), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, as per LM80 extrapolation IES TM- 21-11 report, SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be to relevant BIS standard. Manufactures Word Mark/Name Engraved Embossing/Screen printing on housing. Complete in all respect with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast/Extruded aluminium Body including trim., 12 -15 watt LED Recessed/surface Down lighter (Round/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, of minimum 50000 Burning Hours with 70% of, as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K 5700°K/6500°K (As per ANSI Bin), Maximum power consumption should not more than the specified rating and Fixture shall be to relevant BIS standard. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on housing. Complete in all respect with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast/Extruded aluminium Body including trim., 18 watt LED Recessed/surface Down lighter (Round/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, LED Batten Emergency (Inverter) luminaire, 1100 mm (nominal size), with a minimum system lumen output of 2000 lumen and a minimum system luminous efficacy of 100 lm/W, with built-in Li-ion rechargeable battery, suitable for operation on a 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser etc., as required., metal braided Hoses with steel/Brass Nuts & Rubber Washers suitable Geyser., Length of the Tape is 30 M. The width of the Blade is 13mm, PVC Nail Clip 20 mm (Double Nail), Red Oxide Metal Primer, Paint Thinner (General Purpose), Paint Brush 2", Paint Brush 3", Wooden Screw 35 x 8 mm, Wooden Screw 50 x 8 mm, Dry wall/Gypsum Screw 3/4", Dry wall Gypsum Screw 1", Dry wall/Gypsum Screw 1½", Iron drill bit Set having 25 Pcs (PRO Metal HSS-G Twist Drill Bit Set 2607019446 of Bosch make, Self- supported FRP Platform Step Ladder with the following specifications: • Fully extended height: 10 feet • Minimum platform size: 300 mm (Length) × 250 mm (Width) • Anti-

A/mtc. of Office Building, Gen Set in Office Building Sector-13P at Hisar. A/mtc. of Electrical Installation work in HSVP Office Building in Sector-13P, Hisar

Construction of B/Wall and rasta of Sant Ravidas Bhawan on Panchayat Land at Village Nigana Kalan Block Tosham Scheme DPLAN

Pundri Town Providing sewerage facility in newly approved area at Pundri Town District Kaithal Construction of building at PHESD Pundri and all other works contingent thereto

Construction of District Head Quarter Office building for Excise and Taxation Department in Sector-19 Rewari (Pdg. Chipping / Repair lift and re-fixing of interlocking tiles near substation).

Construction of District Head Quarter Office building for Excise and Taxation Department in Sector-19 Rewari (Pdg. Tin shade for DG set and connection for Servo Stabilizer only).

RFP for Selection of Engagement of Architect firm / Design Engineering firm for Providing the details plan, estimate, drawing for Construction of office Building, Convention center for Municipal Corporation Faridabad in NIT, Faridabad on Quality...

Dismantling of this tile terracing and providing and laying of water proofing treatment, relaying of tile terracing at the roof of office building in Ind. Area Ph.I, Panchkula and all other works contingent thereto

Providing consultancy for construction of office building and residential complex on R-Side of Bahadurgarh Minor from RD 38550 to 41500 at Bahadurgarh ( Including Design , making detail drawings of Structures, Electrical, Plumbing and Horticulture,

Painting and white washing, Providing and fixing of Glass Table Chair Wall fan PVC paneling and other office contingency etc. at HSVP office Building at account Branch Division No. I in Sec 8 Panchkula

PROVIDING 1.5 TON SPLIT TYPE AIR CONDITIONERS AND OTHER ALLIED WORK THERETO IN ESTATE OFFICE IN HSVP OFFICE BUILDING SEC-21 U/E JAGADHRI. (INCLUDING ONE YEAR MTC./DEFECT LIABILITY PERIOD FREE OF COST).

REPAIR OF 100 KVA TRTANSFORMER AND OTHER ALLIED WORKS RELATES TO COMPLETE THE JOB IN HSVP, OFFICE BUILDING COMPLEX, SECTOR-04, KURUKSHETRA. (INCLUDING ONE YEAR FREE MTC. AND DEFECT LIABILITY PERIOD, FREE OF COST)

A/mtc of L/s work in PMDA office building in Sector - 3, Panchkula. (Providing and stacking of ground covers, digging of pits and mtc of grassy lawn and all other works contingent thereto)

Providing unskilled, semi skilled and skilled manpower services for watch and ward and other cat. of canals/drains and office building in the jurisdiction of Gohana W/S Division Gohana For FY 2026-27

Estimate for renovation of existing building for setting up E- Library in Village Surkhpur Block Nahar Dist Rewari

Road and building works

Repair of Guest house and Field hostel building at DCRTPP colony, HPGCL, Yamuna Nagar..

Repairing of toilets and roof treatment of Hostel building of HPTI, Sector-26, Panchkula.

Annual Repair and Maintenance of various Office building and barracks at A.F. Station Tilpat-II Gautam Budhha Nagar U P during 2023-24 SH Miscellaneous maintenance works of various building at Tilpat-I and Tilpat - II. Subwork/Packages: Annual Repair ... various Office building and ...

Const of Nala From Ravidas Mandir to H/o Ramesh Pandit and Construction of Ambedkar Bhawan at Village Bara Gaon Block Naraingarh

Const. of Rest house in Multi Art Culture Centre ( MACC ), Haryana Kala Parisar Bhawan (Pdg. 1Nos. 13Passenger and 1No. 08Passenger Lifts) (Recall)

Const. of C.C. Street near H/o Adv. Rajesh jain to H/o Narwal Bhawan Model Town MC Rohtak in ward 13

Estimate for Re-construction of damaged Pump House Near Ambedkar Bhawan, Vatika Chowk Badshahpur Ward No.18, Div-1B under MCG.Re-call

Construction Repair of Sewer Manhole and Manhole Cover near Arya Smaj Mandir Nirankari Bhawan and other various points in Sector 9 Panchkula