Hardware & Tools Tenders in Uttar Pradesh

Supply of Multimeter with Tool Kit( Comprising with Multimeter-01 No., Nose Plier-01 No., Plier-01 No., Wire Cutter-01 No., Wrench Set(Set of Six)-01 No., Wrapping/De wrapping Tool-01 No(In Set), Kron

DESIGN, SUPPLY OF 16 W LED LIGHT FITTING, ALUMINIUM DIE CAST WITH IP 67 PROTECTION (MINIMUM), NECESSARY HARDWARE, MATERIAL SUITABLE TO WORK ON 24 V DC, 3 DIMENSIONAL TYPE FOR PIT LIGHTING ("A" TYPE FO

Providing and fixing of Anchor Fasteners on stone cladding, replacementof missing and broken stone slabs, water proofing coating on stones andfilling of joints of stones of NTPC EOC, R and D and Satcom building atSector 24, Noida

as per bid document

as per bid document

Procurement of consumables-fasteners for OH of unit 9 and OandM of various divisions of HTPS, Kasimpur, Aligarh through open e-tender.

Expansion Joints for Condenser CW I/L O/L with Retainer Rings and Fasteners for St-1 of NTPC-Rihand

PRESET AIR FILTER AND REGULATOR 1/4 AT 3 BAR PRESSURE WITH BRACKET AND FASTENERS DESIGNED FOR PRESSURISED FLUSHING SYSTEM

Set of Fasteners for Vande Bharat Bogie as per Attached Annexure-A. Acceptable Make/Brand - TVS, TUFF, DFL or UNBRAKO

" DOUBLE BULB SEAL SET OF HOT AIR GATE INCLUDING ONE SET OF FASTENERS AND HOLDING STRIPS (1 SET= 1 N

Set of hardware items for Secondary suspension of 3 Phase locos consisting of 07 items with Zinc coating as follows. (1) Socket Head Screw M12 x 25mm as per IS:6761/1994 & 12.9 PC, Qty/Set- 04 Nos, (2

Set of hardware items for Secondary suspension of 3 Phase locos consisting of 07 items with Zinc coating as follows. (1) Socket Head Screw M12 x 25mm as per IS:6761/1994 & 12.9 PC, Qty/Set- 04 Nos, (2

Air Duct Cooler Industrial, GI Duct Fabrication, Movable Grill, Cascades, Nut Bolts, Material Transport and labour charges

SUPPLY OF 11 KV DP CLAMP, CROSS ARM HOLDING CLAMP AND NUT-BOLTS UNDER BANDA ZONE, BANDA

Tool Kit bag consisting of set of foll [ Tool Kit bag consisting of set of following tools 1. Double Open End spanner(10x11, 12x13, 14x15,16x17,18x19), Insulated Combination Cutting plier-6", Long Nose plier-6", Adjustable Wrench DIP Sleeve, Cross Pein Hammer with Ash wood handle 200gm, Screw Driver 2 in 1 with hexagon rod, Measuring steel tape-5 mtr *19mm, Tester with Neon Lamp, Al. Heavy Duty Knife, Screw Driver Kit 8in1, Wire Stripper & cutter(Insulated), Digital Multimeter, Tetron Tool Bag. Make of These tools shall be Taparia, Baum, PYE, Venus, Fordge.]

Procurement of Miscellaneous Mechanical Items and Consumables (M.S. Gratings, Fasteners etc.) for overhauling of unit 10 and 12 of BTPS Obra.

Set of Fasteners for Vande Bharat Bogie as per Attached Annexure-A. Make - TVS or TUFF or UNBRAKO or DFL only

Set of Fasteners for Vande Bharat Bogie as per Attached Annexure-A. Make - TVS or TUFF or UNBRAKO or DFL only

Set of Hardware items for Secondary Suspension of 3 Phase locos consists of 7 items with Zinc coating. 1) Socket Head Screw-M12X25 mm as per IS 6761/1994 & 12-9 PC Qty/Set- 4 Nos. 2) Hex Head screw M1

Set of Hardware items for Secondary Suspension of 3 Phase locos consists of (07) seven items with Zinc coating. 1) Socket Head Screw M12X25 mm as per IS: 6761/1994 & 12-9 PC, Qty/Set-4 Nos. 2) Hex H

Set of Hardware items, consisting of 2 items. (1) Modified traction link bolt M20 x 67MM long as per RDSO Sketch No.2009-17, IS:1367 Part-3 PC8.8=01 No. (2) Hex Screw M 12 x 35MM property clause 10.9=

STIFFNER PLATE OF FRONT CARRIER PLATE FOR AAR-H-TYPE CBC WITH BDG TO RDSO/CG/DRG/24034, 'ALT. 1' (WITH HARDWARE ITEMS HEXAGONAL HEAD BOLT M16 X 45 TO IS:1364, HEXAGONAL CASTLE NUT M 16 TO IS:2232 & SP

Tool Kit to be issued to Loco-Pilots in lieu of tools required in locomotive. One kit (set) consists of 8 items as per Annexure-A (attached) and a T-type box head spanner (8mmX100mm). Kit to be supplied in a carry bag

Retro Reflective Type Structure Number Plates 340mm x 310 mm with fittings, washer & nut bolts as pe (Q3)

TOOLS AND MACHINARY

Pipe, Steel Rod, Socket, Wiring, Cylinder, Flat Washer, Ring Washer, Small Lock Washer, Large Lock Washer, Chain, Shaft, Plunger Set, Hand Pump Stand Set, Paint White, Pipe Wrench 18 inch, Pipe Wrench 12 inch, Plate Wrench and Spanner Wrench 18X19, ... tape, Nuts and bolts 18X19, ... 18X19, Nuts and bolts 16X17

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at Azamgarh Transformer repairing Workshop center Under EWD Azamgarh

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at different Transformer repairing Workshop center Under EWD Mirzapur

Electric Rickshaw, Battery Charger, Fire Stopper, Tool Kit, Stepneys Wheel

Iron sheet, Tool kit, Iron stand, Iron rack, Nut bolt

Iron stand, Nut bolt, Iron sheet, Tool kit, Iron rack

Procurement of fasteners for milling system and wagon trippler for and side arm charger no 3and4 for OH8, DTPS, HTPS, Kasimpur, Aligarh

Set of Fasteners for Vande Bharat Train set Consisting of 51 item Make: UNBRAKO/DFL/TVS/TUFF (As per Attached Annexure-A)

Set of Fasteners for Vande Bharat Train set Consisting of 51 item Make: UNBRAKO/DFL/TVS/TUFF (As per Attached Annexure-A)

Wood Lathe Machine &Wood Turning Chisel Set Handle (Q3), Waste wood craft machine and tool kits (Q3)

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at different Transformer repairing Workshop centers area Under EWD Varanasi

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at Gorakhpur Transformer repairing Workshop centers Gorakhpur Under EWD Gorakhpur

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at different Transformer repairing Workshop centers area Under EWD Azamgarh

Change of the T/f from welded top cover to new top cover and flange with nuts and bolts at different Tf repairing Workshop centers Under EWSC Varanasi

Supply of holding clamp with nut-bolts for STP and PCC for use of electrification of Namami Gange works

Hardware items for Gear case, Set consists of 09 items (1) Hex Head Screw M16 x 200, 10.9 Class - Specn.No.CLW/MS/3/080 Alt.6 - 04 Nos, (2) Hex Head Screw M12 x 30, 10.9 Class - CLW/MS/3/080 Alt.6 -

Hardware items for Gear case, Set consists of 09 items (1) Hex Head Screw M16 x 200, 8.8 Class - Specn.No.CLW/ MS/ 3/080 Alt.6 : 04 Nos, (2) Hex Head Screw M12 x 30, 8.8 Class . CLW/MS/3/080 Alt.6: 12

Hardware items for Gear Case, Set consists of 09 items.(1)Hex Head Screw-M16X 200,8.8 Class - Specn No.CLW/MS/3/080 AlT 6 04 Nos. (2)Hex head screw -M12X 30, 8.8 Class -CLW/MS/3/080 Alt6 -12 Nos. (3)S

Set of Protection Cover with Clamp and Fasteners for AR Drain Cock as per Drawing No. 1J112040009 & 1J112040010 and as per Annexure-I

Render Safe Procedure Tool Kit For Bomb Detection And Disposal Squad

STRUCTURE HARDWARE -GALVANISED IRON M16 DIA - NUTS AND BOLTS, 35 MM TO 135 MM LONG-NTPC SIPAT MAIN, STRUCTURE HARDWARE -GALVANISED IRON M16 DIA -STEP NUTS AND BOLTS-175MM LONG-NTPC SIPAT MAIN, STRUCTURE HARDWARE -GALVANISED IRON M16 DIA - SPRING ... - NUTS AND BOLTS - ... -STEP NUTS AND BOLTS -175MM ... - NUTS AND BOLTS -35MM ...

Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2), Fire Beaters (Fire suppression hand tools) (Q3), GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3)

Portable Fire Extinguishers (V2) as per IS 15683:2018 (Q2), Fire Beaters (Fire suppression hand tools) (Q3), GALVANIZED MILD STEEL FIRE BUCKET (Fire suppression hand tools) as per IS 2546 (Q3)

Change of the Transformer from welded top cover to new top cover and flange with nuts and bolts at Jaunpur and Sahupuri Transformer repairing Workshop centers Under EWD Varanasi

Digital Multimeter, Magnifying glass with lamp 125 mm, BOSCH Electric Hand Planer, BOSCH Random Orbitle Sander, KT60 Digital Timing Light, Basic Electronic Tool Kit, 53 Pcs Telecom Tool Kit